Results 1 to 18 of 18

Thread: 11 Second 89' Notch Under $10K

  1. #1
    Join Date
    Apr 2005
    Location
    harrison, oh
    Posts
    820

    11 Second 89' Notch Under $10K





    Well Im offering the coupe up for sale. Cobra upgrades from fall 06 are passing $20K as of this past weekend. Its getting rediculous!

    This car is extremely fresh! with a shit ton more money invested than i'm asking for it

    Come see in person & take ride to appreciate car

    Quick run down:

    car itself 89 LX (body has 67,xxx orig miles)

    less than 2067 miles on brand new ford racing crate motor purchased sep 06
    -302
    -holly 700
    -alum svo gtx40 heads
    -e cam
    -roller rockers
    -ford racing balancer
    -pullies
    msd distributor

    *(over $6K in motor carb to oil pan alone)*


    msd 6al
    msd 2 step
    msd soft touch
    msd coil
    msd rpm selector
    msd battery disconnect
    holly black fuel pump / regulator
    new altenator
    billet flywheel
    pullies
    fresh t5 (sep 06)
    pro 5.0 shifter
    maximum motorsports weight jacker rear lowers
    comp engineering struts
    lakewood 50/50s
    drag springs
    motorsports 410 gear
    painless wiring (along with professional wire install)
    hurst line lock
    hurst sidewinder shift knob
    pro comp gauges
    monster tach
    fuel cell
    welds / quick times
    chrome fire extinguisher
    new radiator
    new carpet
    new seats (front & back)
    ....much more!

    Ran 3 passes (only passes on this motor / trans) 2 weekends ago at tristate & had carb issues (no jet extensions)....bogged off line, cleaned out & ran mid 12.70's at 113 consistant with 1.81 60fts. This car is easily capable of....11.90's or faster all day long!!

    May take to Edgewater 6-13-07

    Come see me
    Cash talks!
    $9000 OBO Over $14K (recently invested)
    Johnny
    513-383-8283

  2. #2
    Join Date
    Apr 2005
    Location
    harrison, oh
    Posts
    820
    Forgot to mention...I have stuff that goes along with it.....new 6 piece headlight set "new in box", torque box plates, distributor goodies, bolt kit for rear rims....& more!

    $8500

    I watch guys everyday buy this $3k & $4k junk on these sites & out of the papers then drop another $3K-$4K and still have junk in the end that would be lucky to ever see a 13.0 pass. Why can't anyone bite the bullet and at least start with something solid that has building potential??? I was at the Ford swap last weekend and sat there & watched 2 coupes sell for $4500 that were absolutely shot..135,000+ mile rust bucket stockers with a couple ancient bolt ons, with beyond gone interiors, but I guess they like everyone out there thinks they can make it go fast & look awesome for a few extra hundred dollars....????????

  3. #3
    Join Date
    Mar 2004
    Location
    Milford OH
    Posts
    1,313
    That appears to be one clean coupe !! It's definitely worth your asking price in my opinion !!
    -----------------------------------------
    Scott
    93 Coupe
    66 Fastback

  4. #4
    Join Date
    Dec 2006
    Location
    pissant town, IN
    Posts
    746
    clean car!
    90' lx coupe.... stock cam'd explorer combo.. 11.80 @ 113


    99' Cobra.... work in progress..... cold air... and a free catback... 12.93 @ 107.3mph on Sumitomo tires- (1.89 60')...

  5. #5
    Join Date
    Dec 2006
    Location
    Fairfield, Ohio
    Posts
    238
    I wish I was in the market for a car right now, had an 89 coupe a few years ago. Good luck selling it.

  6. #6
    Join Date
    Feb 2004
    Location
    eastgate
    Posts
    1,035
    hey johnny you know what painless switch panel that is i was looking for something like that for my coupe ??? bump for a nice ride ..bring it to and run the umtr with a "for sale" sign on it on 4/21/07
    "Drive it like you stole it "
    F.O.M.F racing
    who needs rules
    [SIGPIC][/SIGPIC]
    Don G

  7. #7
    Join Date
    Apr 2005
    Location
    harrison, oh
    Posts
    820
    its just the regular painless switch panel for a 87-93 mustang in their catalog. craig can get it for you. i'll try to dig out a part # for you from a receipt.

  8. #8
    Join Date
    Apr 2005
    Location
    harrison, oh
    Posts
    820
    Well the coupe's price just went up!!! welds are gone!...89 4 lug front brakes are gone!...stock rear end with drum brakes are gone!...

    replaced with fresh built (summer 06) rear end out of my cobra (5 lug 33 spline moser c clip elim axles, 9" housing ends, moser spool, 4.30 gear, rear disc brakes, welded tubes, svo cover, upr spherical solid bushings, front 93 cobra spindles & 5 lug disc brakes, and topped off with $2500 worth of bogart wheels & new rubber....

    NEW PRICE: $12,000 FIRM!

    WILL HAVE NEW PICS SOON...
    Last edited by 93cobra; 04-13-2007 at 01:58 PM.

  9. #9
    Join Date
    Feb 2004
    Location
    Springboro, OH
    Posts
    8,348
    What did you do with the Welds? I know someone who may want them.
    They who can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. - Ben Franklin



    1998 Mustang GT
    Coyote Swapped


  10. #10
    Join Date
    Apr 2005
    Location
    harrison, oh
    Posts
    820
    Quote Originally Posted by cstreu1026 View Post
    What did you do with the Welds? I know someone who may want them.
    sold them yesterday to local buddy

  11. #11
    Join Date
    Feb 2006
    Location
    Williamsburg, Ohio
    Posts
    1,183
    That coupe will look nasty with the Bogarts on it!!

    The Bad Boy!

  12. #12
    Join Date
    Nov 2006
    Location
    W. Alexandria, Ohio
    Posts
    116
    Nice lookin coupe, Johnny. Prove a 11 and you should have no trouble getting 12k
    Frank

    Dayton 5.0 Performance
    327 Hi Rev built by Mike Bell and Matt Schoettinger
    393rwhp/353 rwtq....11.22 @ 119.7mph N/A
    482rwhp/501 rwtq....10.78 @ 127.8mph on the juice

    Sportsman block..327 ci.
    Now owned and driven by Mongoose Jr.

  13. #13
    Join Date
    Apr 2005
    Location
    harrison, oh
    Posts
    820
    Quote Originally Posted by orangedemon331 View Post
    That coupe will look nasty with the Bogarts on it!!
    Thanks man...it should be good. By the way...you have one hell of a car yourself...i was checkin it at rigid yesterday. we did find some alumastars in stock yesterday so I'll have them this week. i cant wait till we all have our cars done! its gona be awesome!

  14. #14
    Join Date
    Apr 2005
    Location
    harrison, oh
    Posts
    820
    Quote Originally Posted by Mongoose View Post
    Nice lookin coupe, Johnny. Prove a 11 and you should have no trouble getting 12k
    that will be no problem whatsoever...i have to go to dallas tx for work this week but will make some passes the following friday at e20. minor carb issues were the only thing holding back at tristate a couple weeks ago. 113mph with the flooding off the launch three times in a row will make minimal 11.90.
    thanks for the compliment!

  15. #15
    Join Date
    Feb 2004
    Posts
    10,759
    Quote Originally Posted by 93cobra View Post
    that will be no problem whatsoever...i have to go to dallas tx for work this week but will make some passes the following friday at e20. minor carb issues were the only thing holding back at tristate a couple weeks ago. 113mph with the flooding off the launch three times in a row will make minimal 11.90.
    thanks for the compliment!
    HEY!!!! I'll drive/Race it for you at UMTR this Saturday. Im sure I can get some kind of number out of it.
    http://stangbang.tripod.com/ Where all this began!
    http://stangbang.tripod.com/twisted/ Vinny
    1984 Mustang build @craig_btr on Instagram

  16. #16
    Join Date
    Apr 2005
    Location
    harrison, oh
    Posts
    820
    Quote Originally Posted by Maximus View Post
    HEY!!!! I'll drive/Race it for you at UMTR this Saturday. Im sure I can get some kind of number out of it.
    man..i don't know..if you break it...where would we go for some parts

  17. #17
    Join Date
    Apr 2005
    Location
    harrison, oh
    Posts
    820
    Please remove thread. Only $4K & $40K+ cars sell in general these days.... Anything in between is either too expensive for the guys who would like to have them or not good enough for the guys who can afford them...etc.

  18. #18
    Join Date
    Feb 2004
    Location
    West Side
    Posts
    998
    Quote Originally Posted by 93cobra View Post
    Please remove thread. Only $4K & $40K+ cars sell in general these days.... Anything in between is either too expensive for the guys who would like to have them or not good enough for the guys who can afford them...etc.
    I'll give ya $4k for it. lol

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •