Results 1 to 4 of 4

Thread: Fix for leaky 8.8 c-clip eliminators

  1. #1
    Join Date
    Feb 2004
    Location
    White Oak, OH
    Posts
    3,813

    Fix for leaky 8.8 c-clip eliminators

    If you run Moser C-clip eliminators (will not work with strange C-clip eliminators) on 28 or 31 spline axles you can use a axle seal to keep them from leaking. It is Napa part #13988...about $12 a piece. I just installed them in my rearend housing tonight....look like they are gonna work great...fit like they were made for a 8.8 axle tube. I found this tip while searching around on the corral forums....few other guys that have tried it said it works for them also. Figured I'd pass it along.
    Kilkare xtreme outlawseries X235 2014 Champion and Record Holder
    Dedpedal Racing;Sponsered by Lasota Racing;Tuned by S&M motorsports motorsports
    Boss block 347/225 TFS HP's/SR/BW S476/A2W/PG/FAST xfi on E85
    5.33@134 on a 26x8.5"

  2. #2
    Join Date
    Apr 2004
    Location
    Eastgate
    Posts
    6,161
    thanks for the info Jeff. its the little things that can save you a bunch of time.

  3. #3
    Join Date
    Feb 2010
    Location
    pickerington
    Posts
    5
    might starve the bearings of there fluid. could burn em up

  4. #4
    Join Date
    Oct 2007
    Location
    columbus oh
    Posts
    319
    Quote Originally Posted by windsor86 View Post
    might starve the bearings of there fluid. could burn em up
    cant starve a sealed bearing....thats what the eliminators are for..they remove the open lubed cup style bearing with a sealed bearing pressed on the axle.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •