What size tire for my 15x6's

[beefcake]

trying to figure out what size for my semi-skinnies

on the back i'm gonna be doing the 325/50/15's on the 12" wheels

i'm gonna do 15x6's just to get a little better handling and brakin on the street,

plus i'm big as hell and need the support, rofl

ne way,

what size ya think, i know the rears will be about 28" tall,

a 185/65/15 will be about 24.5" high, think thats about right or do i need to try to find something taller. that section width should be about 7.3"

input?

[kennebellcobra]

I would get as close to a 26" tall tire especially with a 28 on the back.

[92BlackStang]

how you gonna fit the 325's on a fox

[Jeff88coupe]

You getting it mini-tubbed? Biggest rear rim you can fit on a foxbody is 15x10 with minitubing it.

[beefcake]

You getting it mini-tubbed? Biggest rear rim you can fit on a foxbody is 15x10 with minitubing it.

15x10 even with the minitub?

dang, guess i'll do the 10's with the same tire

what backspacing 6.5? or 5.5?

[92BlackStang]

15x10 even with the minitub?

dang, guess i'll do the 10's with the same tire

what backspacing 6.5? or 5.5?

you cannot fit a 325 under a fox without mini tub

[beefcake]

you cannot fit a 325 under a fox without mini tub

i am doing a minitub, i guess im getting mixed info, some say i can do a 12" wide, now jeff says no

but if the 325 will fit on the 10 and go under, i would think it's about the same width (tire) almost

[Jeff88coupe]

Sorry beef...i ment to say...biggest to can fit WITHOUT minitubing it is a 15x10. If you minitub it and narrow the rearend...you can fit 15x12 easy with a 325/50/15

[beefcake]

ahhh,

lol

confusion over lol

what backspacing should i have on the 15x12? 5.5, 6.5, 7.5

[YouGotJunk]

7.5 i do believe!

[85_SS_302_Coupe]

Here beef, this might help http://www.miata.net/garage/tirecalc.html

[mustangboy]

I just sold my 15x12 Bogarts and they had 8in b/s on a stock width rear and mini tub. If you narrow the rear you will need to adjust accordingly.

[Maximus]

I just sold my 15x12 Bogarts and they had 8in b/s on a stock width rear and mini tub. If you narrow the rear you will need to adjust accordingly.

You ready to turn the drum or what?

[beefcake]

I just sold my 15x12 Bogarts and they had 8in b/s on a stock width rear and mini tub. If you narrow the rear you will need to adjust accordingly.

here is the backspacing setup they have

15x12
3.50

$268.44 ea.

15x12
4.50

$268.44 ea.

15x12
5.50

$268.44 ea.

15x12
6.50

$268.44 ea.

15x12
7.50

$268.44 ea

[mustangboy]

You ready to turn the drum or what?

I took it for a drive down the street the other day. I think I'm gonna switch cams. It acts real lazy in the lower rpms and has only 2-3" of vacuum at idle. I don't know the specs on it but my first impression is it will not work very well for a street car. So I'm gonna start investigating on something a little more street friendly.


Terry the 15x12's thru Bogart are $430ea for the D-10's. They pretty much custom build all their wheels so all you have to do is call them directly. However I would narrow your rear if you are gonna mini tub it. I'm sure Rob will tell you exactly the b/s you need.