Squealing noise

[Will]

About 2 weeks ago I started hearing this squealing noise. So I poped the hood to see if it was the serpintine belt or any of the tensioners. I was able to eliminate those. So I got close as I could to the tranny without jacking up the car and bam.... there it is. I'm thinking I need to replace the throw out bearing, but not 100% sure. Anyone have any ideas and how much it may cost me for parts plus labor.

Thanks Will

[Will]

anyone able to give me some info ?

[01cobra]

Mine went through 3 TOB's under warranty and 2 more after that. Its a pretty common problem unfortunately. Not sure on the cost.

[CNTLOSE]

The easiest way to verify if it is the throw out bearing is to see if the sound goes away if you lightly push on the clutch. If so it is the TOB. As far as cost repairing I am not sure. I always replace the clutch when it goes bad and it comes with the kit...and I do my own work. You might want to check with Cincy Speed on a price.

[Will]

The easiest way to verify if it is the throw out bearing is to see if the sound goes away if you lightly push on the clutch.

Thanks for the help guys, and to answer your question... yes, it goes away when I press in the clutch.

[facemelter71]

Mine chirped like a bird for about 1 year before I got mad and replaced the stupid sounding thing.

[CNTLOSE]

Thanks for the help guys, and to answer your question... yes, it goes away when I press in the clutch.

Well good now you know. It is more of a pain in the ass to listen to than anything else. You can wait a while to fix it, just turn the stereo up a little bit.

[ZornLack11]

mine did that but mine made noise when you pushed in the clutch. and it finally started sounding like a grinding sound and replaced the tob, cause clutch only had about 12,000 miles on it and it looked new. and then about a week or two later its making noise again but this time when you are not pushing in the clutch