Registered User
i got a shot to get a set of TEA edel.jr 225 cnc'd heads at what seems to be a goooood price.they have probe shaft mount rockers,nextec springs.
ive learned over time to get the input of you all in making some of my difficult choices,so what are some of oyur opinions on TEA and edel. heads.
the flow #'s on these are on par or better than afr205's and tfs205cnc
Registered User
what are the spring specs and valve tran comp made of?
"Si vis pacem, para bellum - If you want peace, prepare for war."
"Revenge is not a valid motive, it's an emotional response. No, not vengeance. But instead, Punishment."
Registered User
nextec solid roller springs 700+ lift
ferrea 2.05 intake
ferrea 1.60exhaust
titanium locks,retainers
probe 1.6 shaft rockers
were on 408 n/a that made 554rwhp at 10.9.1
Starting all over, Again!
Sounds like a set of good heads, just need to insure the price you are paying is on par and they are going to work for your aplication.
Last edited by 2Fast4You; 12-10-2011 at 11:47 AM.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Registered User
they list for 2300 and are fresh and talked with mike at TEA and he says they will work gr8
just wasnt planning on running a solid roller,but dont want to breakup the setup
Starting all over, Again!
You can always change the valve springs for your application now and if you decide to go w/ a solid roller you already have the components to do so.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote