Page 1 of 2 12 LastLast
Results 1 to 20 of 23

Thread: 5.0 tech article

  1. #1
    Join Date
    Jan 2004
    Posts
    2,662

    Lightbulb 5.0 tech article

    Alright gang, I've decided to add some material to the site and I'm looking for some input.

    What I'm thinking of is a general technical reference that we can use to get info for when it's time to tinker on the toys. I want to make a page that has basic material covering our beloved little pushrod mill, the 5.0L H.O. motor. What I'll include is stuff like firing order, setting timing, torque specs, how to set the TPS and other info that people can use.

    I thought I'd toss it out there and see what you all had to add.

    I think Brian had a good image for short belts too.
    run your mouth when I'm not around, it's easy to achieve
    you cry to weak friends that sympathize
    can't you hear the violins playing your song?
    those same friends tell me your every word

  2. #2
    Join Date
    Feb 2004
    Location
    Independence,KY
    Posts
    6,584
    Didn't noslo have a link to alot of that type of info a while back. I remember you made him take it down because of fear of viruses or something like that.

  3. #3
    Join Date
    Feb 2004
    Location
    SW Ohio
    Posts
    7,548
    I'm all for it...would be happy to contribute!
    I can "Visualize Whirrled Peas" - thanks for the ride Vinny, it was much too short!



    -- Dave
    Resident Philosopher

  4. #4
    Join Date
    Feb 2004
    Location
    Hamilton, Ohio
    Posts
    1,541

    Vinny

    Mustang boy is correct I gottz a ton os stuff .. and I had teh image of teh short belts med belt and standrad belt routing as well.

    Plus. specs n most of the years what heads were common with what motor and what they were found in

    Automatic Trans data with exploded rebuild veiws

    Plus about 50 or so different sounds clips of exhaust combo's

    a lot of different engine files for cams heads etc for SBF and BBF for use with some of the desktop dyno programs.. More than you'll find anywhere else in one location


    Get with me and we can work out what you need..



    laterz
    Last edited by noslo50stang; 11-10-2004 at 08:31 PM.
    W&S Racing

  5. #5
    Join Date
    Feb 2004
    Location
    Amelia
    Posts
    3,409
    I have an article on puttin turbo coupe disc's rears in the stang!

  6. #6
    Join Date
    Mar 2004
    Location
    Goshen
    Posts
    5,929
    I have the article from anderson ford motorsport, that tested like 20 mufflers, and 13 intake manifolds on a 302.
    98 Cobra - Bolt Ons
    2017 F-150 3.5 EB

  7. #7
    matt17 Guest
    Vinny that sounds like a very good idea,cuts down on alot of repeat Q&A in the windsor forum,althow i do enjoy reading the post,this would be more like a reference library! hope to see it soon and to contribute!

  8. #8
    Any updates on the tech info Vinny?


    I can't contribute a whole lot, but I'd love to read what everyone else has to say!

  9. #9
    Join Date
    Feb 2004
    Posts
    10,756
    I did the igniton switch a month or two ago.
    http://stangbang.tripod.com/ Where all this began!
    http://stangbang.tripod.com/twisted/ Vinny
    1984 Mustang build @craig_btr on Instagram

  10. #10
    Join Date
    Mar 2004
    Location
    Troy, Ohio
    Posts
    2,731
    I have some things I can contribute as well.

    How's this project coming along BTW ??
    Conservatives Hate Obama more than they Love America. - John Stewart

    STOP the HATRED PEOPLE !!


    Quote Originally Posted by fst 5pto View Post
    Maybe because Pittsburgh is such a shitty town they all move this way? I say we put deporting the Mexicans on hold and start deporting you Stooler's fans!! LMAO

  11. #11
    Join Date
    Jan 2004
    Posts
    2,662
    Originally posted by Katmandu
    I have some things I can contribute as well.
    If you have information that you would like to email, please send it to vinny5oh@stangbangerz.com

    How's this project coming along BTW ??
    I was planning on finishing it the week after Xmas when I get some off work. I have it started, you can peek at it here.
    run your mouth when I'm not around, it's easy to achieve
    you cry to weak friends that sympathize
    can't you hear the violins playing your song?
    those same friends tell me your every word

  12. #12
    Join Date
    Apr 2004
    Location
    Media Section ! Ft Thomas, KY
    Posts
    1,080
    This will give me something to do during work ! ! !

    http://www.jason.fletcher.net/tech/tech.htm

  13. #13
    Join Date
    Apr 2004
    Location
    Media Section ! Ft Thomas, KY
    Posts
    1,080

  14. #14
    Join Date
    Mar 2004
    Location
    Troy, Ohio
    Posts
    2,731
    BUNCH of good Tech info here as well.........

    http://www.50tech.com/articles/
    Conservatives Hate Obama more than they Love America. - John Stewart

    STOP the HATRED PEOPLE !!


    Quote Originally Posted by fst 5pto View Post
    Maybe because Pittsburgh is such a shitty town they all move this way? I say we put deporting the Mexicans on hold and start deporting you Stooler's fans!! LMAO

  15. #15
    Join Date
    Feb 2004
    Location
    Batavia Ohio
    Posts
    1,826
    Cool ,........Doug ( CapriStang) could contribute a " How to run 13.70's on a 200 shot" column. "Recipe for frustration"
    I just want a car with air.... lol

  16. #16
    Join Date
    Apr 2004
    Location
    Media Section ! Ft Thomas, KY
    Posts
    1,080

  17. #17
    Join Date
    Feb 2004
    Location
    Hamilton, Ohio
    Posts
    1,541

    The Offer still stands Vinny

    I stil have a bunch of tech articls, desktop dyno files, sound clips for exhaust alongwith that article on which one really produce the most HP, blow thru artilcles and parts lists, tranny specs, exploded view digrams etc.. Oh and I may have a connection too some of teh service manuals on cd/dvd

    I got too much stuff to email you so let me know what you want to do

    FTP? burn the stuff to dvd's?

    If I remeber correctly isn't this site setup based on disk space used? if so your gonna need a bunch more!
    W&S Racing

  18. #18
    Join Date
    Jul 2004
    Location
    East Side
    Posts
    742
    yeah man I think it would be cool to have some quick basic info to pull up like firing order, setting TPS sensor, etc. i also think that the other mods would be cool, I don't know if they should maybe in another location?
    "Listen and understand. That Terminator is out there, it can't be bargained with, it can't be reasoned with, it doesn't feel pity or remorse or fear and it absolutely will not stop, ever."

    -Kyle Reese, The Terminator (1984)

    My Cobra:
    # 886 out of 1010 Mystichrome Cobras
    # 1353 out of 5664 '04 Cobras

  19. #19
    Join Date
    Mar 2005
    Location
    Eassss Side Cincy
    Posts
    21
    this would help a lot of us out, especially when you're already frustrated with a problem and don't need to waste time trying to find info all over tha Net.
    "Move it Tubby; or I'll cut some bacon off your back!"...Tyrone off Chappelle's Mad Mad Real World skit

    93 GT black on gray leather
    93 GT Vert- sold http://www.cardomain.com/memberpage/822644
    2000 Expedition Eddie Bauer, new head gaskets
    2000 F-250 7.3L 6-Speed, TS Perf chip, Ram Air, 4" Exhaust 4" Suspension Lift 35's, etc
    1968 Mercury Cougar- Frog green black vinyl top, factory A/C, 90K miles
    1959 Ford 861 Power-Master diesel
    1948 Ford 8N- Not pretty but gets the job done (orig eng)

  20. #20
    Join Date
    Apr 2004
    Location
    Adrian, Mi
    Posts
    121
    this one is a no brainer to most of you probably, but how about a timing setting proceedure along with the suggested settings that are there
    New shifter, adjust stops, then park in garage to keep salt from touching california mustang migrated to michigan. mmmmmmm.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •