http://stangbang.tripod.com/ Where all this began!
http://stangbang.tripod.com/twisted/ Vinny
1984 Mustang build @craig_btr on Instagram
Well I have an engine lined up for this car now. Need to get some paint work completed before it goes in but Im one step in the right direction.
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Got a little 347 from a buddy. It should run decent!
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Almost time for 15 & 22 to reunite! 22 will be done by the end of June.
Hopefully I get this one together soon. It needs a lot of work yet.
I did order the smooth fender aprons for it so I can get them welded in and paint the engine bay. I got with Hud who had the car originally and he is supposed to be getting me the original paint cans that he still has so I can get the colors close.
Pulling the old front suspension out. I have a Team Z K member for it.
Ill be getting the 347 tomorrow for it and possibly a TKO. From there, Im not sure where Im going.
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Just a little update.
Got the smooth aprons from LMR. Started getting the engine bay ready for paint. Need to get all the wiring and brake stuff removed yet. Will be pulling the fenders and front bumper cover off this week and hopefully get into paint next weekend or so.
Walters 347 is going into this one along with his TKO. Picked up a bellhousing, tranny mount, and a few other odds and ends too. I have a stock 8.8 with a 4.10 gear that will get me rolling again. Draglites from the Reef Blue car will be going on this also.
20210526_220330 by Brian Mcwhorter, on Flickr
20210528_202024 by Brian Mcwhorter, on Flickr
20210521_162653 by Brian Mcwhorter, on Flickr
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
The Holeshot wheels sure look good under it!
20210505_233854 by Brian Mcwhorter, on Flickr
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Oooo shit those look strong!!
Picked up the Quick Time bell, fuel pressure regulator, MSD 6530 box, and Team Z pedal today. Thanks for the parts Walter!
Getting close to having all the parts I need to get it finished up once I get the engine bay painted.
Still need an aluminum driveshaft with 31 spline yoke, Team Z A arms, front coil overs, and rear suspension yet. Cant get the driveshaft to save my life. Everything is on back order right now.
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
I see you being motivated! Going to be awesome!
Joe
Thanks! Im doing real good at ordering parts! Ive got a ton of stuff here, just need to get it together.
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Got my Donathen Racing bumper supports today. Pretty nice products. One for the Gould car and one for the Reef Blue car.
20210601_175349 by Brian Mcwhorter, on Flickr
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Gotta start bolting stuff together!!!!!
Show and go!
Lipstick on a pig!
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Where's the Coyote ???
Coming along Buddy !!!
Aaron
F**K Photobucket !!!
Keep the updates coming!
http://stangbang.tripod.com/ Where all this began!
http://stangbang.tripod.com/twisted/ Vinny
1984 Mustang build @craig_btr on Instagram
There are currently 1 users browsing this thread. (0 members and 1 guests)