Here are some photos of the custom fabbed aluminum fuel tank, the top will be block off and it will be sumped in the rear for an external fuel pump and return line. I also added a photo of the upper torque box reinforcements.
Here are some photos of the custom fabbed aluminum fuel tank, the top will be block off and it will be sumped in the rear for an external fuel pump and return line. I also added a photo of the upper torque box reinforcements.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
starting to look real good man, keep up the good work.
Working on getting all the brake lines ran and plumbing in the new Strange master cylinder w/ the line lock and the proportioning valve. This is all from scratch, there are no brake lines on this car at all.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Just figured out the engine combination and waiting for hard numbers on the parts pricing to decide who to go with on them. There are so many different manufacturers out there it makes it difficult.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
What did you decide for on the drivetrain?
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
I am going to still go w/ the big cubic inch small block set up for NOS and run the PG, lots of compression. I still want to try to run in the 8.5 class, it's 8th mile so I want to make as much power as soon possible. I know the challenge is going to get it to the pavement and go straight. I am hoping w/ the glide I can get out of the hole a little more gentle than the 3 speed guys, I guess time will tell.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Bought my rods this week and ordered my 4340 steel crank as well and will be ordering my custom pistons next week. Long block should be ready in the next month or so, I am afraid that the car may not be running this year as I would like. A lot of chassis and body work to be done to it to be ready.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
What are the rims that you have on the car?
Weld Racing forged Alumastars
Last edited by 2Fast4You; 02-04-2012 at 10:22 PM.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
looks good. What are the size of the rear tires? do you know how much they will "grow"? I only ask because in the pic they sure look close to the body down low(front to back). A buddy of mine just did a 427 windsor with air flow research 225 heads that is carbed and set up for nitrous and the motor dyno'ed at 690 hp @6700rpm. and he still has the nitrous to throw on it. Might want to check out bullet racing cams when you are ready for your cam. have you decided on which intake and carb yet?
Disturbing the peace since 1992!
Super Victor intake and still undecided on the carb. I am trying to get 1000hp. The rear tires currently are 28 x 10.5 x 15 and the rear suspension may need some rework to accommodate them but I want to set this up to run the 8.5 class so that will give me some added room.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Received my crank last week along w/ the L19 bolt upgrade for the eagle rods. Ordered my piston's last week but still have not been able to get the piston manufacturer to confirm the piston build, WTF.
Last edited by 2Fast4You; 02-13-2012 at 01:50 AM.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Looks good
Just a minor update, w/ some help the hood has been confirmed as an H.O. Fibertrends 5" Cowl, it is considered as their Outlaw Hood. Also picked up my oil pan, pick up tube and timing cover a week or so ago. Moving along slowly but will get there.
Last edited by 2Fast4You; 02-16-2012 at 10:00 AM.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Pistons!!!
Nice... Looking forward to seeing the car go down the track.. hell, it looks fast sitting still
90 LX - new Toy
" i have 4eye issues"
1982 GT T-top
1983 T-Top Dominator
1985 Gt vert
84 Turbo Gt
82 Ttop
Glad to be back
There are currently 3 users browsing this thread. (0 members and 3 guests)