Results 1 to 16 of 16

Thread: 1985 Mustang GT Convertible 10.5 roller

  1. 08-16-2011, 09:45 AM #1
    2Fast4You's Avatar
    2Fast4You
    2Fast4You is offline Starting all over, Again!
    Join Date
    May 2011
    Location
    Liberty Twp
    Posts
    3,118

    1985 Mustang GT Convertible 10.5 roller

    Asking $6500.00, open to all reasonable offers.

    Had a 460 w/ a powerglide in it and it has been pulled out of the car to sell on a separate listing. Car has lowered tubular K-Member and A-Arms, QA1 Caster Camber plates, bump steer kit, Lakewood 70/30 drag struts w/ coil over conversion, manual brake conversion, Wilwood disc brakes up front w/ 4-piston calipers and drilled rotors, Flaming River rack and piniion w/ shafts, 5-lug conversion all the way around (5 x 4.75), Centerline Convo Pros w/ M/T tires front rims 15x3 and M/T ET Drags rear 28 x 10.5 x 15 and rims 15x8.5, subframe connectors, 8-point roll cage, factory dash, Cervini's 3" bolt on cowl hood, Gary Rohe built rear adjustable upper control arms, Southside lower control arms, Gary Rohe anti-roll bar, welded torque boxes, Moser 9" Fox Body housing w/ Moser 31 spline axles, Auburn Pro Differential, 11" big brake kit, 4.10 gear w/ all new bearings, forged pinion yoke for 1350 u-joints, stock fuel tank w/ sump and dual 8AN fittings and a 6AN drain, Mallory 140PG fuel pump, Mallory 250 fuel filter, 1/2" aluminum fuel line all the way up to
    1/2" braided at the engine compartment into a Mallory regulator w/ duel 3/8" braided line to carb, battery relocation kit in trunk, on/off switch, NOS brackets in trunk.

    Most items are brand new and this car is solid, it shoots out of the hole as striaght as an arrow.

    I have tried to list everything as best as I could at this time, I have alot of time and money tied up in this car. Just a quick change of projects have forced this sale. I can not tell you the amount of countless hours I have invested in this, if you see the car you will know. If I am not able to get a reasonable price for the roller I will start to part it out.

    Shayne 513-519-8394 cell
    #9 2011 Spring Street Car Shoutout

    1991 Mini Tubed Mustang Coupe, in the works.
    351W base, PG, Stock Suspension chassis
  2. 08-26-2011, 12:08 PM #2
    2Fast4You's Avatar
    2Fast4You
    2Fast4You is offline Starting all over, Again!
    Join Date
    May 2011
    Location
    Liberty Twp
    Posts
    3,118
    TTT...
    Someone has to want a solid chasis finished and ready for a drive train...
    I can send photos or arrange for you to come and check it out for anyone that is serious about purchasing a vehicle, I have much more in this than what I am asking.
    #9 2011 Spring Street Car Shoutout

    1991 Mini Tubed Mustang Coupe, in the works.
    351W base, PG, Stock Suspension chassis
  3. 08-26-2011, 12:12 PM #3
    Maximus's Avatar
    Maximus
    Maximus is offline RIP Vinny
    Join Date
    Feb 2004
    Posts
    10,759
    www.photobucket.com is your friend.
    http://stangbang.tripod.com/ Where all this began!
    http://stangbang.tripod.com/twisted/ Vinny
    1984 Mustang build @craig_btr on Instagram
  4. 09-09-2011, 12:40 PM #4
    2Fast4You's Avatar
    2Fast4You
    2Fast4You is offline Starting all over, Again!
    Join Date
    May 2011
    Location
    Liberty Twp
    Posts
    3,118
    Here are few photos taken yesterday.
    Last edited by 2Fast4You; 11-06-2011 at 10:32 AM.
    #9 2011 Spring Street Car Shoutout

    1991 Mini Tubed Mustang Coupe, in the works.
    351W base, PG, Stock Suspension chassis
  5. 09-22-2011, 11:34 AM #5
    2Fast4You's Avatar
    2Fast4You
    2Fast4You is offline Starting all over, Again!
    Join Date
    May 2011
    Location
    Liberty Twp
    Posts
    3,118
    Being that no one has any interest in this car as a rolling chassis, I have decided to part it out. Please take a good look at the list of upgrades on this car and contact me w/ any interest of parts needed. I will start posting individual components in the correct post. I will sell the rolling chassis after all the good parts are sold or if someone wants to buy it without certain parts I can accomodate that as well.

    Not really looking for any trades unless you can do body work and paint, maybe even some 434W stroker stuff like rotating assy or a 351W 9.5" Super Victor intake etc.

    Shayne 513-519-8394
    #9 2011 Spring Street Car Shoutout

    1991 Mini Tubed Mustang Coupe, in the works.
    351W base, PG, Stock Suspension chassis
  6. 09-24-2011, 01:36 PM #6
    2Fast4You's Avatar
    2Fast4You
    2Fast4You is offline Starting all over, Again!
    Join Date
    May 2011
    Location
    Liberty Twp
    Posts
    3,118
    Sale pending on the K-Member, control arms, bump steer, coil overs, Wilwood disc brakes, caster/ camber plates and Flaming River rack and pinion stuff.

    Alot of good stuff left, let me know.
    #9 2011 Spring Street Car Shoutout

    1991 Mini Tubed Mustang Coupe, in the works.
    351W base, PG, Stock Suspension chassis
  7. 09-24-2011, 02:18 PM #7
    Bman's Avatar
    Bman
    Bman is offline Registered User
    Join Date
    Mar 2011
    Location
    Fairfield
    Posts
    404
    You selling the front wheels and tires?
    Brought to you by Jack Daniels.The official Whiskey of Bman.
  8. 09-25-2011, 06:42 PM #8
    2Fast4You's Avatar
    2Fast4You
    2Fast4You is offline Starting all over, Again!
    Join Date
    May 2011
    Location
    Liberty Twp
    Posts
    3,118
    Quote Originally Posted by Bman View Post
    You selling the front wheels and tires?
    Yes,
    Brand new M/T's and brand new Convo Pro's.
    #9 2011 Spring Street Car Shoutout

    1991 Mini Tubed Mustang Coupe, in the works.
    351W base, PG, Stock Suspension chassis
  9. 09-26-2011, 11:29 AM #9
    foxbody's Avatar
    foxbody
    foxbody is offline Registered User
    Join Date
    Jul 2011
    Posts
    131
    pm sent......
  10. 09-26-2011, 02:54 PM #10
    k062693w's Avatar
    k062693w
    k062693w is offline Equal Opportunity !!!
    Join Date
    Aug 2007
    Location
    In a Van By the River !!!
    Posts
    4,670
    What about the rear end ??? 4 or 5 lug ... spool axles, etc ... I have a stock 8.8 with FMS 4:10's to put a rear back under it ???

    Feel free to text me @ (9three7) 2zero6-two4eight9

    Thanks ...
  11. 09-26-2011, 03:03 PM #11
    2Fast4You's Avatar
    2Fast4You
    2Fast4You is offline Starting all over, Again!
    Join Date
    May 2011
    Location
    Liberty Twp
    Posts
    3,118
    Quote Originally Posted by k062693w View Post
    What about the rear end ??? 4 or 5 lug ... spool axles, etc ... I have a stock 8.8 with FMS 4:10's to put a rear back under it ???

    Feel free to text me @ (9three7) 2zero6-two4eight9

    Thanks ...

    What do you want to know?
    #9 2011 Spring Street Car Shoutout

    1991 Mini Tubed Mustang Coupe, in the works.
    351W base, PG, Stock Suspension chassis
  12. 09-27-2011, 12:38 PM #12
    2Fast4You's Avatar
    2Fast4You
    2Fast4You is offline Starting all over, Again!
    Join Date
    May 2011
    Location
    Liberty Twp
    Posts
    3,118
    I have listed many of the items on this car for sale in the correct threads, I will still be selling the rolling chassis as well.

    The new price on the roller at this time is $4900.00, the front suspension has been sold, it now has a stock 5-lug front suspension.
    #9 2011 Spring Street Car Shoutout

    1991 Mini Tubed Mustang Coupe, in the works.
    351W base, PG, Stock Suspension chassis
  13. 10-10-2011, 10:10 AM #13
    2Fast4You's Avatar
    2Fast4You
    2Fast4You is offline Starting all over, Again!
    Join Date
    May 2011
    Location
    Liberty Twp
    Posts
    3,118
    The Convo Pro's have been sold as well, new price on roller is 4400.00 as is or will possibly trade for a UTV of some sort of equal value, for example a Yamaha Rhino.
    #9 2011 Spring Street Car Shoutout

    1991 Mini Tubed Mustang Coupe, in the works.
    351W base, PG, Stock Suspension chassis
  14. 10-13-2011, 07:10 PM #14
    TooFast98Cobra's Avatar
    TooFast98Cobra
    TooFast98Cobra is offline Registered User
    Join Date
    Jan 2010
    Location
    Pittsburgh, PA
    Posts
    298
    the FR rack sell? thanks
  15. 10-18-2011, 08:24 AM #15
    2Fast4You's Avatar
    2Fast4You
    2Fast4You is offline Starting all over, Again!
    Join Date
    May 2011
    Location
    Liberty Twp
    Posts
    3,118
    Quote Originally Posted by TooFast98Cobra View Post
    the FR rack sell? thanks
    Yes it has sold and sorry about the late response.
    #9 2011 Spring Street Car Shoutout

    1991 Mini Tubed Mustang Coupe, in the works.
    351W base, PG, Stock Suspension chassis
  16. 11-01-2011, 08:50 AM #16
    2Fast4You's Avatar
    2Fast4You
    2Fast4You is offline Starting all over, Again!
    Join Date
    May 2011
    Location
    Liberty Twp
    Posts
    3,118
    Close the thread please...
    #9 2011 Spring Street Car Shoutout

    1991 Mini Tubed Mustang Coupe, in the works.
    351W base, PG, Stock Suspension chassis
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules