Page 1 of 17 1234511 ... LastLast
Results 1 to 20 of 323

Thread: 2012 Dirty Dozen ET list

  1. #1
    Join Date
    Oct 2011
    Posts
    160

    2012 Dirty Dozen ET list

    ONLY POST ET's IN HERE!!!

    Please post in this form:
    R/T -
    60'
    330'
    1/8et
    1/8mph
    1000'
    1/4et
    1/4mph

    Fill in from your timeslip or post up a scan of it. Also list who from the board was there to witness your runs. If you break, post up IMMEDIATELY that you are broke.
    Start listing your times, and I'll get the list updated.

    The Stangbangerz 2012 "Dirty Dozen"

    1 8.81 @ 157.?? - Jeff88coupe
    2 9.03 @ 154.55 - beefcake
    3 9.26 @ 145.?? - mustangrodtp
    4 9.75 @ 128.35 - bangingears
    5 9.91 @ 137.04 - DTony
    6 10.26 @ 134.64 - NO SHOT
    7 10.41 @ 136.07 - chac393na
    8 10.58 @127.53 - 331TwistedWedge
    9 10.73 @ 127.02 - AntiRice427
    10 10.75 @ 126.40 - RIXXX93GT
    11 10.83 @ 124.12 - rich
    12 10.99 @ 128.92 - MWoods26


    On Deck

    11.47 @ 125.03 - exrider417
    11.56 @ 119.37 - bennyboy
    11.60 @ 120.65 - 1987coupe
    11.66 @ 116.?? - firestang70
    11.75 @ 113.60 - facemelter71
    11.85 @ 122.18 - Blackout
    12.53 @ 110.48 - MustangChuck
    12.60 @ 114.35 - 302coupe

    Broke / Changing Combo

    10.66 @ 124.07 - KennebellCobra
    10.993 @ 123.49 - Steves LX
    Last edited by THE DOZEN MASTER; 11-19-2012 at 06:15 PM.

  2. #2
    Join Date
    Mar 2004
    Location
    Franklin Ohio
    Posts
    1,328
    Today at Tri-State Dragway

    Here is a pic of the times



    Whyucryn, Noshot, & Metcalf Racing all were there.

  3. #3
    Join Date
    May 2006
    Location
    Springfield Township
    Posts
    2,629
    drove it to e20 and back last night 4/6 ... all motor 331.

    1.389
    4.331
    6.768
    100.41
    8.869
    10.647
    126.70

    should be more in it
    Attached Images Attached Images
    Last edited by 331TwistedWedge; 04-07-2012 at 10:05 AM.
    331 Mexican, TW205's, tf box r, Cam Motion Cam 10.41 @129.12

    11.38 @119 http://www.youtube.com/watch?v=iXfVgm9jpd0

    10.98 @123 http://www.youtube.com/watch?v=xBgUh...=youtube_gdata

  4. #4
    Join Date
    Oct 2004
    Location
    Eastgate
    Posts
    3,367
    Quote Originally Posted by 331TwistedWedge View Post
    drove it to e20 and back last night 4/6 ... all motor 331.

    1.389
    4.331
    6.768
    100.41
    8.869
    10.647
    126.70

    should be more in it
    Nice work!

  5. #5
    Join Date
    May 2006
    Location
    usa
    Posts
    479
    Quote Originally Posted by 331TwistedWedge View Post
    drove it to e20 and back last night 4/6 ... all motor 331.

    1.389
    4.331
    6.768
    100.41
    8.869
    10.647
    126.70

    should be more in it
    Congrats Rick you'll definitely get into the 50's, your car looked and sounded killer going down the track!



    Peace




    James
    1990 ssp black coupe (aka ROCKET), bone stock CI unported E7's plus full mac exhaust, water pump and crank pullies, synthetic fluids, 14 degrees of timing, 80 mm maf, power pipe, 65 mm throttle body, 4.10 gear, welds and skinnies plus suspension. Best et to date 12.41, best mph to date 106.58 with a best 60ft of 1.59 on 26/8.5/15 Mickey Thompson slicks on a 64 degree day with 35% humidity all with 260rwhp and 320rwtq

  6. #6
    Join Date
    Feb 2004
    Posts
    10,756
    Quote Originally Posted by 331TwistedWedge View Post
    drove it to e20 and back last night 4/6 ... all motor 331.

    1.389
    4.331
    6.768
    100.41
    8.869
    10.647
    126.70

    should be more in it
    Yours and Shannon's Coupes looked Killer last night!
    http://stangbang.tripod.com/ Where all this began!
    http://stangbang.tripod.com/twisted/ Vinny
    1984 Mustang build @craig_btr on Instagram

  7. #7
    Join Date
    Oct 2011
    Posts
    1,093
    Nice times ricky, what did shannons run

  8. #8
    Join Date
    May 2006
    Location
    Springfield Township
    Posts
    2,629
    Quote Originally Posted by 331lx View Post
    Nice times ricky, what did shannons run
    he pulled his mgw shifter out of the base of the tranny ... broke a bolt ...

    thx everyone, i will keep working on shift points, launching and tuning ... i think 10.4x's are within reason ...
    331 Mexican, TW205's, tf box r, Cam Motion Cam 10.41 @129.12

    11.38 @119 http://www.youtube.com/watch?v=iXfVgm9jpd0

    10.98 @123 http://www.youtube.com/watch?v=xBgUh...=youtube_gdata

  9. #9
    Join Date
    Jan 2007
    Posts
    741
    killer rick

  10. #10
    Join Date
    Jan 2005
    Location
    NKY
    Posts
    3,516
    Quote Originally Posted by Maximus View Post
    Yours and Shannon's Coupes looked Killer last night!
    Thanks
    94 Cobra, 9.54@141.17 1.32 60' -1.29 best...kennebell 2.2 http://www.youtube.com/watch?v=FAGXfeucShE (sold)
    90lx(Flamer)stock 302 iron gt-40's tf stage 1 cam Dynoed 328h 342t 11.57@115.06 (sold)

    89 coupe 302 iron gt-40's, 373-363 NO NOS! 10.88@123.3 (Retired)

    "New combo"... NA 363, tf 190 11r's, 5spd 9.93@137.88, 3275 lbs (ac/ps)

  11. #11
    Join Date
    Jan 2005
    Location
    NKY
    Posts
    3,516
    Quote Originally Posted by 331lx View Post
    Nice times ricky, what did shannons run
    I ran a couple of 11.000's, 6.9's in the 1/8 but I think my cheap crane valve springs are getting weak cause I couldn't finish the 1/4 before I heard a little valve float.

    I did break the shifter like Rick said before I turned the bottle on

    Put about 20 wire ties on the shifter to hold it, which worked for one pass then the 2nd one it came out in my hand
    94 Cobra, 9.54@141.17 1.32 60' -1.29 best...kennebell 2.2 http://www.youtube.com/watch?v=FAGXfeucShE (sold)
    90lx(Flamer)stock 302 iron gt-40's tf stage 1 cam Dynoed 328h 342t 11.57@115.06 (sold)

    89 coupe 302 iron gt-40's, 373-363 NO NOS! 10.88@123.3 (Retired)

    "New combo"... NA 363, tf 190 11r's, 5spd 9.93@137.88, 3275 lbs (ac/ps)

  12. #12
    Join Date
    Jan 2005
    Location
    NKY
    Posts
    3,516
    Guess I could post my opening day time slip at e20, Rick and a few other were there.

    94 Cobra, 9.54@141.17 1.32 60' -1.29 best...kennebell 2.2 http://www.youtube.com/watch?v=FAGXfeucShE (sold)
    90lx(Flamer)stock 302 iron gt-40's tf stage 1 cam Dynoed 328h 342t 11.57@115.06 (sold)

    89 coupe 302 iron gt-40's, 373-363 NO NOS! 10.88@123.3 (Retired)

    "New combo"... NA 363, tf 190 11r's, 5spd 9.93@137.88, 3275 lbs (ac/ps)

  13. #13
    Join Date
    Oct 2011
    Posts
    1,093
    so whats in store to fix these weak springs shannon?

  14. #14
    Join Date
    Jan 2005
    Location
    NKY
    Posts
    3,516
    Quote Originally Posted by 331lx View Post
    so whats in store to fix these weak springs shannon?
    Trying to come up with something but its slim pickings with the way they put 2 different valve sizes in the gt40's and the way the spring locator is.

    I am leaning towards trying to make the BB chevy beehives work some how???
    94 Cobra, 9.54@141.17 1.32 60' -1.29 best...kennebell 2.2 http://www.youtube.com/watch?v=FAGXfeucShE (sold)
    90lx(Flamer)stock 302 iron gt-40's tf stage 1 cam Dynoed 328h 342t 11.57@115.06 (sold)

    89 coupe 302 iron gt-40's, 373-363 NO NOS! 10.88@123.3 (Retired)

    "New combo"... NA 363, tf 190 11r's, 5spd 9.93@137.88, 3275 lbs (ac/ps)

  15. #15
    Join Date
    Jun 2004
    Location
    In Front!!!!!!!!
    Posts
    975
    Trying to learn these drag radials!!!!Its not wanting to leave at all. But I'll get it.I went a 10.62 n/a at tristate yesterday. Rich and a few others were there.I went 128 earlier that day but short shifted this pass..
    Attached Images Attached Images
    CINCY SPEED
    DAYTON PERFORMANCE
    DIRTY DOZEN #2 2010
    DIRTY DOZEN #3 2011
    DIRTY DOZEN #2 2013
    Fall 2011 Cincy Speed SCS Winner

  16. #16
    Join Date
    Feb 2004
    Posts
    10,756
    YO DM! How about an update?!
    http://stangbang.tripod.com/ Where all this began!
    http://stangbang.tripod.com/twisted/ Vinny
    1984 Mustang build @craig_btr on Instagram

  17. #17
    Join Date
    May 2006
    Location
    Springfield Township
    Posts
    2,629
    improved my 10.64 a little bit ...

    1.396
    4.321
    6.739
    101.33
    8.824
    10.588
    127.53

    seen by shannon, jeff and others ...
    Attached Images Attached Images
    331 Mexican, TW205's, tf box r, Cam Motion Cam 10.41 @129.12

    11.38 @119 http://www.youtube.com/watch?v=iXfVgm9jpd0

    10.98 @123 http://www.youtube.com/watch?v=xBgUh...=youtube_gdata

  18. #18
    Join Date
    Mar 2004
    Location
    Franklin Twp
    Posts
    1,289
    Great work Ricky!!!!!
    Rich Taylor
    92 Mustang LX 357w...Carb'd!
    10.83 @ 124mph

  19. #19
    Join Date
    Oct 2004
    Location
    Vandalia
    Posts
    1,580
    Nice runs Rick, killer 60ft also!

  20. #20
    Join Date
    Jun 2004
    Location
    In Front!!!!!!!!
    Posts
    975
    I'm getting to know these dr's a little better I went a 1.402 60' and a 10.37@ 128 n/a I cant wait to hit it with the spray now!!!!
    Attached Images Attached Images
    CINCY SPEED
    DAYTON PERFORMANCE
    DIRTY DOZEN #2 2010
    DIRTY DOZEN #3 2011
    DIRTY DOZEN #2 2013
    Fall 2011 Cincy Speed SCS Winner

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •