Scat 4340 crank, 5.400 rods, and 4.125 Probe pistons

**draggin50** · 09-08-2013, 03:50 PM

Selling the complete rotating assembly I have. Its a Scat 4340 crank and 5.400 rods, Probe 4.125 pistons, SFI balancer, and flywheel. 28 oz balance. This is a 363 or could swap pistons for a 347. $700
Can get pics of the crank and other parts if needed.

**draggin50** · 09-10-2013, 08:34 PM

Still got this... Its a piston swap away from a 347 set up for cheap!

**atbracn** · 09-19-2013, 06:12 PM

Hey Brian, it is brad call me 301-8365

**draggin50** · 09-19-2013, 07:46 PM

Still have this for sale! Will take 1800 for this with the heads and rockers and intake.

**draggin50** · 09-25-2013, 12:34 AM

Need this gone before I decide to build something else!!

**pegasus** · 10-01-2013, 10:14 AM

are the pistons flat tops?

**draggin50** · 10-01-2013, 10:58 AM

They are dished and 4.125 bore. I was thinking about keeping it all and ordering a set of Probe 4.030 and putting it all in a stock block with an On3 kit just to have fun.

**2Fast4You** · 10-01-2013, 12:08 PM

What is your price without the pistons?

**draggin50** · 10-01-2013, 12:18 PM

I hate to really split it up. I don't have much use for a set of pistons and nothing else. If I had to go buy a crank and rods, Id have over 700 in it. Plus balancer and the other stuff.

**draggin50** · 11-10-2013, 06:07 AM

Still for sale. $650 needs to go!

**draggin50** · 11-14-2013, 12:34 PM

$500. Needs to go.

**draggin50** · 11-23-2013, 03:14 PM

Sold please delete.

Thread: Scat 4340 crank, 5.400 rods, and 4.125 Probe pistons

Thread Tools

Display

Scat 4340 crank, 5.400 rods, and 4.125 Probe pistons

Thread Information

Users Browsing this Thread

Posting Permissions