Results 1 to 5 of 5

Thread: Fuel Pump fitting question

  1. #1
    Join Date
    Jul 2015
    Location
    Dayton
    Posts
    51

    Fuel Pump fitting question

    My stock fuel pump is dumping fuel everywhere and I"m wanting to go with a Holley mechanical pump. Can anyone lead me in the right direction to find the output fitting with return that will fit the Holley pump.

  2. #2
    Join Date
    Jul 2015
    Location
    Dayton
    Posts
    51
    Disregard, I found the correct pump with the return output.

  3. #3
    Join Date
    Jul 2015
    Location
    Dayton
    Posts
    51
    Turns out the pump I ordered only had two ports, one for in one for out. No connection for a return line.

  4. #4
    Join Date
    Mar 2004
    Location
    Hamilton!,OH.
    Posts
    4,556
    When I had my '84, I put a '86 long block in it and kept it carbed. Since the '86 didn't have the mount for a fuel pump, I just mounted a cheap electric pump back by the tank and used the stock lines forward. Worked like a champ, but it was a stock application....don't know if it will work with yours, as I don't know how "stock" yours is.


    ~ JEFF ~

    '04 Mach1

  5. #5
    Join Date
    Jul 2015
    Location
    Dayton
    Posts
    51
    Currently bone stock. I was looking at adding something upgraded for further down the road. I just ended up ordering a stock pump for now. I'll go electric pump later like you mentioned with a regulator that has the return port I guess.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •