Page 1 of 2 12 LastLast
Results 1 to 20 of 22

Thread: 2200r with 50 miles

  1. #1
    Join Date
    Mar 2004
    Posts
    1,731

    2200r with 50 miles

    ECS 2200R (billet case YSI), head unit has approx. 50 miles (piston land broke off in motor) , I added a second tial bov (brand new), 2 pullies 2.70 and 3.33, rest of kit has 2500 miles. Im switching to a F1x. Bracket is trimmed for bigger water pump and throttle body. Bracket didn't flex at all after being trimmed. Comes with 8-10 rib spacers and tensioner or 6 rib spacers and tensioner. Head unit is rated to 1200hp. The kit is still on the car and will be removed shortly. Amelia, Ohio.
    $5500



  2. #2
    Join Date
    Mar 2004
    Posts
    1,731
    Bump

  3. #3
    Join Date
    Mar 2004
    Posts
    1,731
    Bump

  4. #4
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Eric (yellow98cobra) needs this!
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  5. #5
    Join Date
    Mar 2004
    Posts
    1,731
    Quote Originally Posted by draggin50 View Post
    Eric (yellow98cobra) needs this!
    I agree!

  6. #6
    Join Date
    Dec 2009
    Location
    Springboro Ohio
    Posts
    686
    Quote Originally Posted by draggin50 View Post
    Eric (yellow98cobra) needs this!
    Eric needs the $$$$$$ to buy it. Lol

  7. #7
    Join Date
    Mar 2004
    Posts
    1,731
    Anyone with a fancy Z06 has some deep pockets lol

  8. #8
    Join Date
    Oct 2004
    Location
    Eastgate
    Posts
    3,367
    Trade you a S10 with a 350 and a BBQ grill. Boot on your end of course. LMK.

  9. #9
    Join Date
    Mar 2004
    Posts
    1,731
    Boot? Do you wear a size 11?

  10. #10
    Join Date
    Dec 2009
    Location
    Springboro Ohio
    Posts
    686
    Quote Originally Posted by USMCPONY View Post
    Anyone with a fancy Z06 has some deep pockets lol
    Ha ha, I wish that was the case.

  11. #11
    Join Date
    Mar 2004
    Posts
    1,731
    I'll cut you a deal if you change your mind

  12. #12
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Hard to beat that deal Eric! Then you can give Bobby a run for his money!
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  13. #13
    Join Date
    Mar 2004
    Posts
    1,731
    $5,000. I have more than $6,500 in this

  14. #14
    Join Date
    Dec 2009
    Location
    Springboro Ohio
    Posts
    686
    Quote Originally Posted by draggin50 View Post
    Hard to beat that deal Eric! Then you can give Bobby a run for his money!
    I don't think that would be near enough. Might get me to the 1/8 to watch him go through the 1/4. It is a great deal but I don't have the money. Have some home projects that are taking priority.

  15. #15
    Join Date
    Mar 2004
    Posts
    1,731
    What's he run? Casey Hord ran a 9.001@164mph with Novi 1500, Brian tooley cam, meth injection, exhaust, clutch and 15" conversion. The 2200r is twice the blower of the 1500.

  16. #16
    Join Date
    Dec 2009
    Location
    Springboro Ohio
    Posts
    686
    Quote Originally Posted by USMCPONY View Post
    What's he run? Casey Hord ran a 9.001@164mph with Novi 1500, Brian tooley cam, meth injection, exhaust, clutch and 15" conversion. The 2200r is twice the blower of the 1500.
    He ran 8.70's. He is upgrading. Should be low 8's.

  17. #17
    Join Date
    Mar 2004
    Posts
    1,731
    But you'll be in a low 9 second possible 8 second Z06 lol. Id take that anyday.

  18. #18
    Join Date
    Mar 2004
    Posts
    1,731
    This blower has gone 8.33 on a auto converted corvette. It's the 2nd biggest blower that'll fit on a corvette. The biggest is the F1x. Its gone 7.5@187mph on a auto c6.

  19. #19
    Join Date
    Dec 2009
    Location
    Springboro Ohio
    Posts
    686
    Quote Originally Posted by USMCPONY View Post
    This blower has gone 8.33 on a auto converted corvette. It's the 2nd biggest blower that'll fit on a corvette. The biggest is the F1x. Its gone 7.5@187mph on a auto c6.
    No doubt that the blower has potential, I am not looking to do the same thing to this car that I have done to all the other ones. I just want something to drive and is dependable. If I was to build anything to the track it would be the cobra.

  20. #20
    Join Date
    Mar 2004
    Posts
    1,731
    $4800

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •