Page 10 of 40 FirstFirst ... 6789101112131420 ... LastLast
Results 181 to 200 of 799

Thread: Before & After

  1. #181
    Join Date
    Feb 2004
    Posts
    10,756
    Quote Originally Posted by Walter View Post
    Garage build!!!
    Nope. Using what I got. I figure this 2 car will keep me from getting more vehicles I dont need.
    http://stangbang.tripod.com/ Where all this began!
    http://stangbang.tripod.com/twisted/ Vinny
    1984 Mustang build @craig_btr on Instagram

  2. #182
    Join Date
    Feb 2004
    Posts
    10,756
    Got some stuff done in the garage this past weekend. Im planning on installing a two post, base lift, so I need to decide where I want the columns and where I need to remove the drywall to get to the trusses. I plan on modifying them to where I have an extra 2' of head room and I can extend the lift all the way up without the roof of the car hitting the ceiling.

    Lining up the Stang so that I know where to place the columns.


    The fan will be relocated.


    These 2 lights will be moved closer to the wall and I will be adding 3 additional lights.
    [/url]

    I will push the Stang out while we drill and modify the trusses.
    http://stangbang.tripod.com/ Where all this began!
    http://stangbang.tripod.com/twisted/ Vinny
    1984 Mustang build @craig_btr on Instagram

  3. #183
    Join Date
    Oct 2004
    Location
    Eastgate
    Posts
    3,367
    Very nice!!!

  4. #184
    Join Date
    Oct 2004
    Location
    Eastgate
    Posts
    3,367
    Dbl posting in this bitch!!

  5. #185
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Got your work cut out for ya! Gonna be worth it though in the end.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  6. #186
    Join Date
    Feb 2004
    Posts
    10,756
    We drilled a "Test" hole and concrete was 5.125" thick!! So no Concrete saw needs to be used!! However, we still have to move the ceiling up and move some lights around, so there will still be some down time till I can get back on this.
    http://stangbang.tripod.com/ Where all this began!
    http://stangbang.tripod.com/twisted/ Vinny
    1984 Mustang build @craig_btr on Instagram

  7. #187
    Join Date
    May 2011
    Location
    Liberty Twp
    Posts
    3,118
    What lift are you going with and from where?
    #9 2011 Spring Street Car Shoutout

    1991 Mini Tubed Mustang Coupe, in the works.
    351W base, PG, Stock Suspension chassis

  8. #188
    Join Date
    Feb 2004
    Posts
    10,756
    Since my ceilings are 9'3", I have to go with this one...

    https://www.gregsmithequipment.com/Atlas-BP8000

    Free shipping!
    http://stangbang.tripod.com/ Where all this began!
    http://stangbang.tripod.com/twisted/ Vinny
    1984 Mustang build @craig_btr on Instagram

  9. #189
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Cant beat those for the price. I wish I had taller ceilings...
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  10. #190
    Join Date
    Feb 2004
    Posts
    10,756









    Good thing it needed a bath today.
    http://stangbang.tripod.com/ Where all this began!
    http://stangbang.tripod.com/twisted/ Vinny
    1984 Mustang build @craig_btr on Instagram

  11. #191
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Damn... You aint messing around!
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  12. #192
    Join Date
    Feb 2004
    Posts
    10,756
    Jeff and his crew are nit messing around at all! I came home to this...





    They should have the light fixtures and fan moved, then the drywall finisher can come and hopefully knock this thing out!
    http://stangbang.tripod.com/ Where all this began!
    http://stangbang.tripod.com/twisted/ Vinny
    1984 Mustang build @craig_btr on Instagram

  13. #193
    Join Date
    May 2011
    Location
    Liberty Twp
    Posts
    3,118
    That's awesome Craig.
    #9 2011 Spring Street Car Shoutout

    1991 Mini Tubed Mustang Coupe, in the works.
    351W base, PG, Stock Suspension chassis

  14. #194
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Any pictures of how they modified the trusses?
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  15. #195
    Join Date
    Feb 2004
    Posts
    10,756
    Quote Originally Posted by draggin50 View Post
    Any pictures of how they modified the trusses?






    http://stangbang.tripod.com/ Where all this began!
    http://stangbang.tripod.com/twisted/ Vinny
    1984 Mustang build @craig_btr on Instagram

  16. #196
    Join Date
    Oct 2004
    Location
    Eastgate
    Posts
    3,367
    Badass!!!!

  17. #197
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Nice work!!!
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  18. #198
    Join Date
    Feb 2004
    Posts
    10,756
    Not a whole lot going on with anything. The Nova is on the lift getting some routine maintenance and the Mustang is at Cam Dedman's shop getting some work done.


    The DOT, ET Streets are quick to smoke!


    I need to get with Adam and turn this up some more!


    Weighing in a Hefty 3465lbs, but looking good.


    One day, Id like to do a similar set-up like this, in the Stang.



    Hopefully I measured right...


    It fits! This is the lift Max'd out and thats a 6' ladder, so its the same height as my overhead lift I had at my old garage.


    Dropped off the Stang for some work.


    Nothing too crazy, just a "Tiny Tub" so that I dont have to run wheel spacers and keep the stock tubs. I want to keep the backseat and keep the Stang as factory as possible, so that one day, I can run it in any class.


    I found some pieces that might work, so hopefully Cam can design a bracket to allow me to run a Hyd Clutch set-up with this Coyote/TK package.
    http://stangbang.tripod.com/ Where all this began!
    http://stangbang.tripod.com/twisted/ Vinny
    1984 Mustang build @craig_btr on Instagram

  19. #199
    Join Date
    Jan 2008
    Posts
    8,828
    Where do you get that wrap? And what is it called? Is simply a shrink wrap, or a cling wrap, or what? Looks like it would be very useful for doing detail buffing work rather than using towels and miles of painters tape.

    The 8 sec pass was very impressive btw. Well done.

  20. #200
    Join Date
    Feb 2004
    Posts
    10,756
    Quote Originally Posted by redfirepearlgt View Post
    Where do you get that wrap? And what is it called? Is simply a shrink wrap, or a cling wrap, or what? Looks like it would be very useful for doing detail buffing work rather than using towels and miles of painters tape.

    The 8 sec pass was very impressive btw. Well done.
    Not sure, Cam uses it in his shop. Ill ask him next time I talk to him.

    Thanks! It was Fun!
    http://stangbang.tripod.com/ Where all this began!
    http://stangbang.tripod.com/twisted/ Vinny
    1984 Mustang build @craig_btr on Instagram

Thread Information

Users Browsing this Thread

There are currently 3 users browsing this thread. (0 members and 3 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •