Page 1 of 6 12345 ... LastLast
Results 1 to 20 of 109

Thread: New project car

Hybrid View

  1. #1
    Join Date
    Feb 2004
    Location
    Independence,KY
    Posts
    6,584

    New project car

    I've been out of Mustangs for a couple years now and decided to jump back in with a 1993 notchback. Some of you guys may recognize this car as it was Alan Pittman for several years and was Scott's a few years prior to that. The car is a 100k mile car with a completely stock engine and an Immaculate black interior but does need a little bit of paint and body work to be amazing. I already has an 03 cobra irs with koni coil overs and all the maximum Motorsport goodies as well as cobra brakes all around. I have been considering doing a widebody for quite sometime so that may happen with this car. The plan is to do a 295 Square setup on the car using the CCW classic wheels that I have already picked up. I also have all of the Maximum Motorsports parts to do the front suspension as well as all of the parts to do the cam, heads etc etc on the engine. With that being said I am slightly considering selling the car and picking up an air-cooled Porsche 911 so someone please talk me out of that, LOL or make me an offer I can't refuse on the Mustang. Here are a few pictures as it currently sits. The black notch is Matt Farrah's car I got the please of seeing in person at bbi autosports in CA. I have loved it ever since. The 911 is the color scheme I am currently thinking of doing but that is not set but I love Audi nardo gray. If you are curious about the steering wheel it is a Momo proto tipo that was designed by Magnus walker and I actually purchased at his shop in Los Angeles and was to go in my first 911. I got impatient, lol.

    Sent from my Pixel XL using Tapatalk
    ">

  2. #2
    Join Date
    Jan 2008
    Posts
    8,828
    Get the over rated V.W. if you seem to be struggling with a male inferiority complex. Otherwise stay on target with that fine looking 93 Notch.

  3. #3
    Join Date
    Mar 2004
    Location
    Milford OH
    Posts
    1,313
    Car looks great Kenny !! I never got to do much with it, back when I owned it...
    If for some crazy reason you ever want to sell the interior from it, give me a heads up !!

    -Scott
    -----------------------------------------
    Scott
    93 Coupe
    66 Fastback

  4. #4
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    The coupe looks nasty on the CCW's! That would be a hard one to get rid of for me.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  5. #5
    Join Date
    Feb 2004
    Location
    Batesville, IN
    Posts
    2,589
    Nice car!
    TIM

    2017 Mustang Ecoboost 4cyl automatic

    11.94 @ 115

  6. #6
    Join Date
    Jul 2007
    Location
    Milford
    Posts
    814
    that audi grey is one of my favorites. a foxbody would look great in that color.
    '17 WRX- 312/317 driving all the wheels

  7. #7
    Join Date
    Feb 2004
    Location
    Huber Heights, OH
    Posts
    1,033
    Quote Originally Posted by mustangboy View Post








    Approved
    "The Truth is, Your the Weak, and I am the Tyranny of Evil Men!"

  8. #8
    Join Date
    Oct 2004
    Location
    Eastgate
    Posts
    3,367
    Sell it and get the Porsche!!! Neighbor next door has a red '77 911 turbo on mesh BBS's. Sweet lil ride.

  9. #9
    Join Date
    Feb 2004
    Location
    Independence,KY
    Posts
    6,584
    Big table full of parts just patiently awaiting installation. Pretty cool that I coated the valve covers and intake years ago and now they are mine. Plans are for install to start in approximately 2 weeks

    Sent from my Pixel XL using Tapatalk
    ">

  10. #10
    Join Date
    Feb 2004
    Location
    Independence,KY
    Posts
    6,584
    The rear CCW wheels are about a half inch too wide so I have a little of a rubbing issue. Till I buy narrower lips or go full widebody I picked up some enkie's to run for now. Fitment is spot on for wheels that came off an fd rx7. Sometime this winter I will coat them a bright completely ricetastic color

    Sent from my Pixel XL using Tapatalk
    ">

  11. #11
    Join Date
    Apr 2006
    Location
    Cincinnati
    Posts
    2,040
    The car looks great! Good luck with it.
    Joe

  12. #12
    Join Date
    Mar 2004
    Location
    Anderson
    Posts
    2,948
    Wow, looks killer on the Enkeis! Keep it and do the widebody!
    2011 Black on Black GT

  13. #13
    Join Date
    Feb 2004
    Location
    Independence,KY
    Posts
    6,584
    Thanks guys. It is scheduled to go in on the 3rd for all the engine work and to get all the maximum Motorsport suspension bolted on so I'll be keeping it for a while

    Sent from my Pixel XL using Tapatalk
    ">

  14. #14
    Join Date
    May 2011
    Location
    Liberty Twp
    Posts
    3,118
    Sweet, glad to hear you're keeping it Kenny!
    #9 2011 Spring Street Car Shoutout

    1991 Mini Tubed Mustang Coupe, in the works.
    351W base, PG, Stock Suspension chassis

  15. #15
    Join Date
    Feb 2004
    Location
    Independence,KY
    Posts
    6,584
    Headed to Skaats precision for a bit of a make over.

    Sent from my Pixel XL using Tapatalk
    ">

  16. #16
    Join Date
    Feb 2009
    Location
    SW Ohio
    Posts
    1,657
    Can't wait to see where this one ends up Kenny.
    2017 BMW 430i
    2012 Chevy Impala 9C3

  17. #17
    Join Date
    Sep 2007
    Location
    Northern Kentucky
    Posts
    1,087
    Glad to see you back in a mustang Kenny!

  18. #18
    Join Date
    Jan 2008
    Posts
    8,828
    Good to see some of you "old timer" members finally getting back into the swing of things.

  19. #19
    Join Date
    Feb 2004
    Location
    Independence,KY
    Posts
    6,584
    https://www.facebook.com/skaatspreci...1596500428423/

    Baseline is established so let the modding begin. You may have to go like Skaats Precision on FB to see the vid
    ">

  20. #20
    Join Date
    Feb 2004
    Location
    Playing with transmissions
    Posts
    7,021
    Looks about like my old 5.0 TPI Trans Am dyno pull. I think it cracked 204 whp...


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •