Page 1 of 2 12 LastLast
Results 1 to 20 of 22

Thread: Wanted parts

  1. #1
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916

    Wanted parts

    I picked up a 91 GT roller and Ill be needing some parts...

    Drive shaft

    Draglites

    Tubular K member and A arms

    A9L computer

    gray interior parts

    catback exhaust

    front seats

    good stock 5.0 engine

    cam
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  2. #2
    Join Date
    Jul 2016
    Posts
    81
    I have a few gray interior parts. Pm at 513 257 1584

  3. #3
    Join Date
    Jun 2004
    Location
    Carlisle
    Posts
    2,013
    Brian I'll have grey interior minus seats for sale

  4. #4
    Join Date
    Sep 2011
    Posts
    733
    What u buildings now buddy. A nice little cruiser.

  5. #5
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Just an old 91 GT. Nothing nice that's for sure! Im just gonna try to go fast in a beater!
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  6. #6
    Join Date
    Aug 2011
    Location
    Manchester, OH
    Posts
    607
    Brian I have a good A9L I took out of the coupe. The seal has never been broken on it also have a MAC pro chamber and possibly sell the mac catback off the car.
    1992 lx 5.0 5 speed stock and slow but looks good!

  7. #7
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    I found a computer. Might be interested in the exhaust though.

    Also I need a set of 94-95 spindles and a nice drivers side LX tail light.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  8. #8
    Join Date
    Aug 2011
    Location
    Manchester, OH
    Posts
    607
    Brian I have a good A9L I took out of the coupe. The seal has never been broken on it also have a MAC pro chamber and possibly sell the mac catback off the car.
    1992 lx 5.0 5 speed stock and slow but looks good!

  9. #9
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Also need a nice drivers side LX tail light...
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  10. #10
    Join Date
    Sep 2011
    Posts
    733
    I hope you can find parts better than I can Brian

  11. #11
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Im looking for cheap parts!!! Those are pretty easy to find!
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  12. #12
    Join Date
    Jul 2016
    Posts
    81
    Ill look tomorrow but i might have a stock driveshaft you can have

  13. #13
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Cool! Thanks!

    Ill still need to get with a few guys on some parts. Busy with work again...
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  14. #14
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Still need parts....

    Good 5.0 complete, driveshaft, drivers side LX tail light, cat back, K member and A arms, cam, and FI intake. Project scrap pile is in need!!! The cheaper the better!
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  15. #15
    Join Date
    Mar 2004
    Location
    Milford OH
    Posts
    1,313
    Quote Originally Posted by draggin50 View Post
    Still need parts....

    Good 5.0 complete, driveshaft, drivers side LX tail light, cat back, K member and A arms, cam, and FI intake. Project scrap pile is in need!!! The cheaper the better!
    I've got an assortment of 5.0 roller cams and a couple Explorer intakes if you're interested.....
    -----------------------------------------
    Scott
    93 Coupe
    66 Fastback

  16. #16
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Sure am... What cams you have? How much for one of the explorer intakes? Sucks I just sold one to Jesse... The story of my life!
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  17. #17
    Join Date
    Mar 2004
    Location
    Milford OH
    Posts
    1,313
    Quote Originally Posted by draggin50 View Post
    Sure am... What cams you have? How much for one of the explorer intakes? Sucks I just sold one to Jesse... The story of my life!
    Would $80 work for an Explorer upper and lower ? I've got a Lunati 51014 cam if you want it ? I'd need $100 for it....

    Just let me know and sorry about the delay in responding !! You can text me at Five One Three 3154698.

    I've got a 347 short block and aluminum cyl heads as well if you need ....I'd go through the short block though. Only has approx 500 miles on it but kept getting silver sparkly flecks in the oil.

    -Scott
    Last edited by Gearhead; 04-17-2018 at 08:55 PM.
    -----------------------------------------
    Scott
    93 Coupe
    66 Fastback

  18. #18
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Looking for more parts...

    Hose from the valve cover to the throttle body
    Intake hose from the mass air meter to the throttle body
    Drivers side LX tail light
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  19. #19
    Join Date
    Aug 2011
    Location
    Manchester, OH
    Posts
    607
    Brian I have the hose that runs from the throttle body to the valve cover fill tube and I have a stock inlet tube from throttle body to mass air if it will work. I have a stock meter and airbox and all I have the A9L out of the car as well if you know anyone needing one.
    1992 lx 5.0 5 speed stock and slow but looks good!

  20. #20
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    That would work for me. I have a C&L mass air meter already and the A9L.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •