Results 1 to 13 of 13

Thread: Fuel Pressure

  1. #1
    Join Date
    Nov 2005
    Location
    Middletown,Oh
    Posts
    477

    Fuel Pressure

    My fuel pressure jumped to over 60psi today. Can a regulator going bad cause that big of a jump? Also is anyone running the Russell fuel lines that American muscle sells?

  2. #2
    Join Date
    Feb 2004
    Location
    Germantown
    Posts
    5,675
    Im not 100% sure but since it's supposed to regulate the pressure, I'd assume its possible that you could get a pressure rise. I never monitored a factory style regulator before and never had an aftermarket one fail. A pinched/crushed return line could also raise the pressure. If you start the car and pull the reference line and there's fuel in that line, it's time for a replacement.
    Rick

    Rick90lx@yahoo-dot-com
    6.27625 liters of turbocharged goodness


  3. #3
    Join Date
    Nov 2005
    Location
    Middletown,Oh
    Posts
    477
    When you say the "reference line" do you mean the vacuum line to the regulator? Thanks for your help Rick93coupe.

  4. #4
    Join Date
    Feb 2017
    Posts
    118
    I ran the Russel lines, never had an issue with them.


    Sent from my iPhone using Tapatalk

  5. #5
    Join Date
    Feb 2004
    Location
    Germantown
    Posts
    5,675
    Yep, the line from the intake manifold to the regulator. When a regulator diaphragm fails, fuel gets drawn up the hose because there's a vacuum on it. You're welcome.
    Rick

    Rick90lx@yahoo-dot-com
    6.27625 liters of turbocharged goodness


  6. #6
    Join Date
    Nov 2005
    Location
    Middletown,Oh
    Posts
    477
    well, from one problem to the next. I pulled the upper intake and replaced the fuel pressure regulator. I also replaced some warn vacuum hoses and PCV valve. I have everything back together and it runs like crap. check the hoses to make sure everything is correct. I have my fuel pressure set at 43psi.
    The car feels like it has a miss to it. Anyone ever had this happen or ideas on what could it be?

  7. #7
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Check the plugs? May have fouled one out. Did the regulator fix your fuel pressure issue?

    Sounds like a vacuum leak somewhere. Double check the vacuum lines.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  8. #8
    Join Date
    Nov 2005
    Location
    Middletown,Oh
    Posts
    477
    Fuel regulator fixed the fuel pressure issue. I did a smoke leak test on the car today. The only place that had a leak was the throttle body. It was leaking out the throttle shaft on the bottom. Is this normal? No leak anywhere else. New plugs tomorrow.

  9. #9
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    A small amount is probably normal. It would take something larger than that to make it miss bad.

    Id try dropping the fuel pressure down around 39-40 also. Depending on your combination I guess.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  10. #10
    Join Date
    Nov 2005
    Location
    Middletown,Oh
    Posts
    477
    Changed the plugs last night. No change. I'm going to check the TPS sensor tonight. If this doesn't work I'm not sure what to do next. Anybody have any ideas?

  11. #11
    Join Date
    Nov 2005
    Location
    Middletown,Oh
    Posts
    477
    UPDATE. It was my throttle body. Big thanks to Mike Bell for the MAC 70mm throttle body and advice. Running better than ever now.

  12. #12
    Join Date
    Feb 2004
    Location
    Troy, Ohio
    Posts
    1,445
    Awesome! Glad you and Mike got it figured out!
    Greg
    Midnight Mafia

  13. #13
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Glad you got it figured out!

    I need to get a hold of Mike sometime.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •