Page 2 of 2 FirstFirst 12
Results 21 to 24 of 24

Thread: Misc Mustang parts

  1. #21
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Stuff I still have to sell....

    1 set of 87-93 V8 spindles/brakes- $100 with rotors and calipers
    GT wing- $20
    Whole cowl panel- $100
    Mint 86 black console and armrest- $200
    1986 Mustang LX. Real nice shell with a nice set of manual doors and will have a stock K member, V8 spindles and brakes, Tokico blue struts, 8.8 with 3.55 gear, and boxes of parts... I can throw in some 87-93 grey interior for a little more. Has newer quarter glass in it. Body is real nice. Under the hood has been smoothed and in primer. $1200
    Ported truck lower and Systemax upper- $400
    BBK 70mm TB and EGR plate- $150
    12-200 coil over springs- $50
    DSS main girdle and windage tray with studs and hardware- $200
    C&L 73mm mass air meter for 19lb injectors- $50
    Complete 5.0 with pulleys and AC delete with an F cam and Explorer GT40 intake- $700. Have a video of it running right before it was pulled.
    Complete, fresh RMVB C4 with a DirtyDog converter and a 50oz flexplate. Worked good behind a turbo and a small blower. $650. Will throw in a B&M Hammer shifter for another $100.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  2. #22
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Still have some parts left...

    1 set of 87-93 V8 spindles/brakes- $100 with rotors and calipers
    GT wing- $20
    Whole cowl panel- $100
    Mint 86 black console and armrest- $200
    BBK 70mm TB and EGR plate- $150
    C&L 73mm mass air meter for 19lb injectors- $50
    Complete 5.0 with pulleys and AC delete with an F cam and Explorer GT40 intake- $700. Have a video of it running right before it was pulled.
    B&M Hammer shifter for C4- $100.
    24lb injectors and mass air meter- $125
    fox airbag steering column- $50
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  3. #23
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Throttle body and EGR plate is gone...

    Still have the rest.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  4. #24
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Still have a lot of parts to sell...

    1 set of 87-93 V8 spindles/brakes- $100 with rotors and calipers
    GT wing- $20
    LX wing $20
    Decent hatch. Has holes for the old 3 piece wing. Good glass- $50
    Whole cowl panel- $100
    Nice passenger side frame rail and strut tower- $75
    Hatch Quarters- $75 each
    C&L 73mm mass air meter for 19lb injectors- $50
    Complete 5.0 with pulleys and AC delete with an F cam and Explorer GT40 intake- $700. Have a video of it running right before it was pulled.
    B&M Hammer shifter for C4- $100.
    Grey interior parts (Quarter plastics, dash, console, kick panels- $100
    Holley Systemax cam. I think this is the older 107 cam. In good shape. $50
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •