Results 1 to 17 of 17

Thread: Header ceramic coating

  1. #1
    Join Date
    Jul 2015
    Posts
    452

    Header ceramic coating

    Does anybody on here do high temp powder coating or ceramic header coating? Or do you have a good recommendation? Thanks. My mild steel hookers need some love.


    Sent from my iPhone using Tapatalk
    Last edited by S281SC; 06-29-2020 at 01:19 PM.
    #2 - 2020 DD Challenge List

    1997 Cobra - C heads, Cams, Sullivan intake, long tubes, homemade cai, 4.30, strange axles, e85, chromoly cage
    2000 Saleen S281SC - factory "stock"

  2. #2
    Join Date
    Feb 2004
    Location
    Fayetteville
    Posts
    1,877
    Toms customs coatings in Blanchester has been doing a lot of headers in cerakote. Lots of different colors.
    2014 CTS V-sport
    2006-teen Black CCSB Powerstroke

  3. #3
    Join Date
    Jul 2015
    Posts
    452
    Thanks I will ask. Looks like they do mostly gun parts. But they offer high temp options. I may use them on a gun project in the near future if they wont do my headers. Thank you!


    Sent from my iPhone using Tapatalk
    #2 - 2020 DD Challenge List

    1997 Cobra - C heads, Cams, Sullivan intake, long tubes, homemade cai, 4.30, strange axles, e85, chromoly cage
    2000 Saleen S281SC - factory "stock"

  4. #4
    Join Date
    Jul 2015
    Posts
    452
    I was in touch with them. It sounds like they would be more than happy to coat brand new ones. They dont mess with dirty ones as it affects their blast media. I may have to wire wheel or blast them first to take them to Tom’s. But looks like they do some cool stuff on their FB page. Thanks for the referral.


    Sent from my iPhone using Tapatalk
    #2 - 2020 DD Challenge List

    1997 Cobra - C heads, Cams, Sullivan intake, long tubes, homemade cai, 4.30, strange axles, e85, chromoly cage
    2000 Saleen S281SC - factory "stock"

  5. #5
    Join Date
    Feb 2004
    Location
    Fayetteville
    Posts
    1,877
    He did a set of stepped LS fender exit headers and mufflers I had made for a chevyII and a set of bbc headers for my buddy and they turned out nice
    2014 CTS V-sport
    2006-teen Black CCSB Powerstroke

  6. #6
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    What about Aesthetic Finishers in Piqua? They do real nice work.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  7. #7
    Join Date
    Feb 2004
    Location
    Springboro, OH
    Posts
    6,289
    Quote Originally Posted by draggin50 View Post
    What about Aesthetic Finishers in Piqua? They do real nice work.
    That's who's done all my ceramic coating to date. Would like to have a back up go to tho.

  8. #8
    Join Date
    Jul 2015
    Posts
    452
    Quote Originally Posted by draggin50 View Post
    What about Aesthetic Finishers in Piqua? They do real nice work.
    They are a little closer to me. I will check with them today. Thanks.


    Sent from my iPhone using Tapatalk
    #2 - 2020 DD Challenge List

    1997 Cobra - C heads, Cams, Sullivan intake, long tubes, homemade cai, 4.30, strange axles, e85, chromoly cage
    2000 Saleen S281SC - factory "stock"

  9. #9
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Quote Originally Posted by S281SC View Post
    They are a little closer to me. I will check with them today. Thanks.


    Sent from my iPhone using Tapatalk
    I think you will be real happy with them. Ive seen some nice stuff that they have done.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  10. #10
    Join Date
    Feb 2004
    Location
    Troy, Ohio
    Posts
    1,445
    About Aesthetic Finishers, I live maybe 5 mins or so away from them, when I needed some things powder coated a couple of weeks ago I went to Kenny in northern Kentucky, which is like an hour and 20 minute drive one way for me. I went to AF several years ago and was less than impressed with how they ran things and how I was treated overall, I ended up not even getting the work done there. So, I had a not very good experience but maybe you'll have better luck.
    Greg
    Midnight Mafia

  11. #11
    Join Date
    Jul 2015
    Posts
    452
    I left a message with them and am waiting on a call back.


    Sent from my iPhone using Tapatalk
    #2 - 2020 DD Challenge List

    1997 Cobra - C heads, Cams, Sullivan intake, long tubes, homemade cai, 4.30, strange axles, e85, chromoly cage
    2000 Saleen S281SC - factory "stock"

  12. #12
    Join Date
    Jul 2016
    Location
    Troy , OH
    Posts
    476
    Sand blasting place on 202 / 40 in Huber is who i used to sand blast my headers clean. I dont know if they are open still or not.
    LS Swapped - Locally hated now

  13. #13
    Join Date
    Feb 2004
    Location
    Springboro, OH
    Posts
    6,289
    Quote Originally Posted by Kwik92GT View Post
    About Aesthetic Finishers, I live maybe 5 mins or so away from them, when I needed some things powder coated a couple of weeks ago I went to Kenny in northern Kentucky, which is like an hour and 20 minute drive one way for me. I went to AF several years ago and was less than impressed with how they ran things and how I was treated overall, I ended up not even getting the work done there. So, I had a not very good experience but maybe you'll have better luck.
    My experience differed. Kenny did some cool stuff for me years ago, so positive for both.

  14. #14
    Join Date
    Jul 2015
    Posts
    452
    I assume by kenny you guys are talking about killer koatings? I called him first. He cant do high temp or ceramics yet but will soon hopefully. I did get a call back from aesthetic finishes. They are booked out 6-8 weeks. I have a small blast cabinet and I think I will get them cleaned up and do a vht coating and then bake them using an oven cure. And if that doesn’t hold up maybe next year when kenny has his ceramic equipment up and running, I will use him. thanks for the input guys!


    Sent from my iPhone using Tapatalk
    #2 - 2020 DD Challenge List

    1997 Cobra - C heads, Cams, Sullivan intake, long tubes, homemade cai, 4.30, strange axles, e85, chromoly cage
    2000 Saleen S281SC - factory "stock"

  15. #15
    Join Date
    Jul 2015
    Posts
    452


    I used a wire wheel on an angle grinder and followed that with blast media. Then i coated the headers with VHT black ceramic paint. I am working on “building” an oven to cure them. They look pretty good, to me at least. And considering on a 4v you cannot see them unless you are under the car, this should work. I mostly wanted to stop the surface rust.


    Sent from my iPhone using Tapatalk
    #2 - 2020 DD Challenge List

    1997 Cobra - C heads, Cams, Sullivan intake, long tubes, homemade cai, 4.30, strange axles, e85, chromoly cage
    2000 Saleen S281SC - factory "stock"

  16. #16
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Turned out nice!
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  17. #17
    Join Date
    Feb 2004
    Location
    Troy, Ohio
    Posts
    1,445
    Looks like they cleaned up nicely.
    Greg
    Midnight Mafia

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •