Page 1 of 2 12 LastLast
Results 1 to 20 of 27

Thread: Mustang parts

  1. #1
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916

    Mustang parts

    Parting out a couple more cars. I can text pictures if needed.

    82 GT front bumper cover and fenders. Lower valance is in rough shape. Will take $75 for it.
    82 GT passenger side frame rail. This thing is clean! $125 Ill cut the entire frame rail out.
    82 GT drivers side frame rail. Not as clean but is still better than 90% of them out there. No holes. $100
    82 cowl panel $75
    82 GT fog lights and bracket $125
    3 piece wing $100
    2 TRX wheels with old tires $50
    2 ten hole wheels with junk ET Streets $40
    Convertible doors. 87-93 $150 Real nice bottoms and have black door panels. Door panels aren't perfect.
    87-93 Spindles $50
    Performer 289 intake $100
    Stock radiators $35 each. Have 3 or 4.

    If you need anything, let me know and Ill see if I have it. Will be bringing in a few more soon.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  2. #2
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Picked up a 93 LX hatch today. May try to keep it in 1 piece for now. Its not in real bad shape.

    Have a 94 GT convertible in line to be picked up. It will be a complete part out.

    If anyone needs any little odds and end pieces, let me know. Except for rear view mirrors... Ive yet to come across one car with one!
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  3. #3
    Join Date
    Aug 2007
    Location
    In a Van By the River !!!
    Posts
    4,670
    Remember me for interior pieces and a radiator !!!
    Aaron


    F**K Photobucket !!!

  4. #4
    Join Date
    Jan 2013
    Posts
    38
    What color interior does the 93 hatch have

  5. #5
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Quote Originally Posted by 92sc4v View Post
    What color interior does the 93 hatch have
    Gray. Im going to go out and check and see what all is in it. I may sell it as a roller. Its not to hateful and I don't want to cut them up if I can save them.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  6. #6
    Join Date
    Feb 2004
    Posts
    10,756
    How much did you want for the Sway Bar mounts?
    http://stangbang.tripod.com/ Where all this began!
    http://stangbang.tripod.com/twisted/ Vinny
    1984 Mustang build @craig_btr on Instagram

  7. #7
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Quote Originally Posted by Maximus View Post
    How much did you want for the Sway Bar mounts?
    Ill drill a set off and give em too ya.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  8. #8
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Have a 94 GT Convertible here now too.

    Tan top and interior.
    Computer and harness still in it.
    Body is rough.
    8.8 rear end with disc brakes
    5 lug front spindles and hubs
    V6 wheels painted black
    Ill get some pictures later.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  9. #9
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  10. #10
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    The 82 front bumper cover, 3 piece spoiler, and the 10 holes are sold. The convertible foxbody doors are sold also.

    Also have a used set of Eibach drag springs. $125. Will throw in the new air bag kit for another $50.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  11. #11
    Join Date
    Feb 2004
    Posts
    10,756
    Quote Originally Posted by draggin50 View Post
    Ill drill a set off and give em too ya.


    Thats awesome! Ill PM ya my address. Make sure you put your PP address in there so I can pay for the shipping!
    http://stangbang.tripod.com/ Where all this began!
    http://stangbang.tripod.com/twisted/ Vinny
    1984 Mustang build @craig_btr on Instagram

  12. #12
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Quote Originally Posted by Maximus View Post


    Thats awesome! Ill PM ya my address. Make sure you put your PP address in there so I can pay for the shipping!
    It might take me a minute now since everything is covered in this white crap but Ill get to it soon.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  13. #13
    Join Date
    Feb 2004
    Location
    Springboro, OH
    Posts
    6,275
    How much for front spindles?

  14. #14
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    82 GT passenger side frame rail. This thing is clean! $125 Ill cut the entire frame rail out.
    82 GT drivers side frame rail. Not as clean but is still better than 90% of them out there. No holes. $100
    82 cowl panel $75
    82 GT fog lights and bracket $125
    2 TRX wheels with old tires $50
    87-93 Spindles $50
    Stock radiators $35 each. Have 3 or 4.
    94 GT T4MO Computer $150
    94 GT 8.8. Not sure what gear but Ill check later today $200
    94 GT fenders $20 each
    94 GT trunk lid and spoiler $40
    Eibach drag springs, front and rear. Not cut $125
    V6, 16 inch 5 lug wheels and junk tires $100 They hold air...
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  15. #15
    Join Date
    Feb 2004
    Posts
    10,756
    Quote Originally Posted by draggin50 View Post
    The 82 front bumper cover, 3 piece spoiler, and the 10 holes are sold. The convertible foxbody doors are sold also.

    Also have a used set of Eibach drag springs. $125. Will throw in the new air bag kit for another $50.
    Im going to go with STEEDA's 555-8112 kit. This puts the mounts on the actual frame rail, not the brackets.

    BUT, do you have a 1999-2004 PS rack?
    Last edited by Maximus; 12-15-2020 at 08:36 PM.
    http://stangbang.tripod.com/ Where all this began!
    http://stangbang.tripod.com/twisted/ Vinny
    1984 Mustang build @craig_btr on Instagram

  16. #16
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Quote Originally Posted by Maximus View Post
    Im going to go with STEEDA's 555-8112 kit. This puts the mounts on the actual frame rail, not the brackets.

    BUT, do you have a 1999-2004 PS rack?
    I just picked up a 2001 GT tonight for parts so Ill have a rack here soon.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  17. #17
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    82 GT passenger side frame rail. This thing is clean! $125 Ill cut the entire frame rail out.
    82 GT drivers side frame rail. Not as clean but is still better than 90% of them out there. No holes. $100
    82 cowl panel $50
    82 GT fog lights and bracket $100
    2 TRX wheels with old tires $40
    87-93 Spindles $50
    Stock radiators $35 each. Have 3 or 4.
    94 GT T4MO Computer $100
    94 GT 8.8. 4.10 gear $200
    94 GT fenders $20 each
    94 GT trunk lid and spoiler $40
    94 Convertible pump/motor- $50
    Eibach drag springs, front and rear. Not cut $125
    V6, 16 inch 5 lug wheels and junk tires $100 They hold air...
    2001 GT trunk lid and spoiler- $50
    nice 2001 doors- $50 each
    2001 GT hood and scoop- $50
    Tail lights- $50
    01 Front bumper cover- $100, $125 with headlights. Header panel cracked
    PATS system- $200. Computer, cluster, key and ring
    Rear end- $200
    Flowmaster cat back $150
    Light gray interior- ???
    Hydroboost- $100
    4.6 Engine runs decent- $350
    Automatic transmission- $150

    Just ask and I can probably have it.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  18. #18
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    TRX wheels, 94 8.8, and the 87-93 spindles are gone.

    Still have most of the 2001 parts. So far only the fenders are sold.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  19. #19
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    2001 GT for parts...
    20201218_155107 by Brian Mcwhorter, on Flickr
    20201218_155049 by Brian Mcwhorter, on Flickr
    20201218_155031 by Brian Mcwhorter, on Flickr
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  20. #20
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    May have another 2001 V6 car coming tomorrow.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •