Results 1 to 6 of 6

Thread: Parts clean up!!!

  1. #1
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916

    Parts clean up!!!

    Cleaning up around the garage. Selling all kinds of stuff.
    Built and narrowed 8.8. 33 spline axles, spool, narrowed 2.5 inches per side, new strange brakes, 5/8's studs, 5x4.75 bolt pattern $1900

    15x10 Holeshots with 4 inch bs. 5x4.75 bolt pattern with 235/60 PBR's.$1200

    394 Windsor. Block is junk. Wiseco pistons, eagle rods, arp main and head studs, prothane mounts. $600

    Team Z mini tubs $350

    Racecraft 17 inch aluminum wing for a coupe $450

    Anderson power pipe, new. $250

    Explorer gt40p intake $150

    96-04 front spindles and brakes $75

    289 heads and comp 3/8s stud mount rockers $200

    9 inch rear end with 4.56 and spool $450

    Donathan racing from bumper support $175

    Flowtech fwd and down turbo headers $250

    Victor Jr intake $225

    Holley 650 carb $400

    Trick flow valve covers $75

    Motorsports valve covers (breather holes are cut open) $50

    SLP catback $200

    Complete 5.0 engine from the 92. Has ARP head bolts and 1.7 rockers. Throttle body to pan. $1000

    292 Y block, 3 deuces, Hunt Mag, and powermaster alternator $1200

    Passenger side rear vert quarter $75


    There's more, I just can't think of it all. I can text pictures.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  2. #2
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Also have a Dart block 427 that is all new and needs machined and assembled. Iron Eagle 9.5 block with Cleveland mains, ZSR 427 rotating assembly with custom Diamond pistons, Molner power adder plus rods, tool steel wrist pins, and Molnar crank, trick flow 225 highports, Holley Hi-ram intake, Innovators west balancer, custom hydraulic roller cam, Moroso pan, Comp ultra magnum rockers, stud girdles. ARP bolts and head studs, misc gaskets, and a bunch of other stuff. $11,500. Im sure Im forgetting a lot. Everything is new and in boxes still.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  3. #3
    Join Date
    Jul 2015
    Posts
    450
    What is the 9” ford set up for?


    Sent from my iPhone using Tapatalk
    #2 - 2020 DD Challenge List

    1997 Cobra - C heads, Cams, Sullivan intake, long tubes, homemade cai, 4.30, strange axles, e85, chromoly cage
    2000 Saleen S281SC - factory "stock"

  4. #4
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Quote Originally Posted by S281SC View Post
    What is the 9” ford set up for?


    Sent from my iPhone using Tapatalk
    Its from a mid 70's Versailes. I cant remember the length right off. This was from a coupe I bought that had leaf springs and shackles welded in... I was going to cut off all the brackets and use it in the Model A but I sold it too!
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  5. #5
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    292 Y block and Holley carb are gone. Still have the rest of it.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  6. #6
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    The 427 rotating assembly, Hi-Ram intake, and the rocker stud girdles are also gone. Will sell the rest all separate.

    225 ZSR Highports $3500

    Custom hydraulic roller cam $400

    Comp Ultra Magnum rockers for Highports $475

    Moroso pan and pick up for 351W $400

    Innovators West 0 balance balancer $400

    Aluminum driveshaft with 31 spline yoke $300

    Driveshaft loop $50

    Team Z rear drag springs $175
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •