Last winter I bought everything needed for my entire kit to be put together by El diablo on Extremestreetcars.com or some may know him as Smack. The complete hotside is out of 2 1/2 inch tubing with a flex-bend in the middle along with a 50mm wastegate. The entire cold side is made out of 2 1/2 inch tubing as well..and also has a 50mm BOV. The turbo is a T70 that's in very good condition. It has a .86 A/R and spools really fast and works very well. This kit is intercooled with a 27x7x3.5 intercooler which mounts underneath the car out of the way. The car was driven about 10-15 miles with the kit on and it really seemed to make alot of power and worked very well. This kit was built around stock suspension also so there shouldn't be any clearance problems. This kit is 100% complete minus the shorty headers and ready to bolt onto any 5.0 foxbody (can use factory headers if you choose). It comes with silicone couplers...t-bolt clamps...everything you'll need. I've just decided to go a different route to get my car out sooner! If you have any questions just send me a PM and i'll answer any questions you might have!!! Right now I'm just taking offers. I know how much I have in everything including all the labor of the kit being built but just not sure what to ask for it....Thanks
Pics can be found here http://extremestreetcars.com/forums/...read.php?t=530