Results 1 to 11 of 11

Thread: Pi heads 400 bucks

  1. 08-18-2009, 10:57 AM #1
    pegasus's Avatar
    pegasus
    pegasus is offline shift @ valve float
    Join Date
    Jun 2007
    Location
    Waynesville, Ohio, United States
    Posts
    1,800

    Pi heads 400 bucks

    I have a set of pi heads that have been ported with valves,springs, retainers and keepers

    the valves have had a 3angle job done

    Im looking for $400 or trade for 5.0 goodies or a cutting torch


    I traded my 4v heads for them the guy that owned it before me worked for comp cams he did the port work at there shop i cant rember the part number of the springs and the valves but they are comp I sent a e-mail to the guy last night he can firm up the rest of the info if it helps he was bulding it for a blower
  2. 08-18-2009, 04:12 PM #2
    turbostang95's Avatar
    turbostang95
    turbostang95 is offline Registered User
    Join Date
    Oct 2008
    Location
    batavia,ohio
    Posts
    301

    heads

    pm sent
  3. 08-25-2009, 09:46 AM #3
    pegasus's Avatar
    pegasus
    pegasus is offline shift @ valve float
    Join Date
    Jun 2007
    Location
    Waynesville, Ohio, United States
    Posts
    1,800
    350 untill i get the numbers
  4. 08-28-2009, 08:59 PM #4
    98mustanggt's Avatar
    98mustanggt
    98mustanggt is offline Registered User
    Join Date
    May 2006
    Location
    Southern Indiana
    Posts
    125
    pm sent
  5. 09-07-2009, 02:34 PM #5
    2-8-1
    2-8-1 is offline The Anti Rice
    Join Date
    May 2007
    Location
    Somerset, KY
    Posts
    442
    Still have these?
  6. 09-13-2009, 09:27 PM #6
    pegasus's Avatar
    pegasus
    pegasus is offline shift @ valve float
    Join Date
    Jun 2007
    Location
    Waynesville, Ohio, United States
    Posts
    1,800
    still have but i lost the camera

    this is all the info i have from the last owner

    do not have the flow numbers on the heads but it should equal to a stage 1 to stage 2 port job. The springs are Comp Cams but I do not know the part number. but they will handle .550" lift because that is size cams that I was running.
    Last edited by pegasus; 09-13-2009 at 09:33 PM.
  7. 09-15-2009, 04:48 PM #7
    98mustanggt's Avatar
    98mustanggt
    98mustanggt is offline Registered User
    Join Date
    May 2006
    Location
    Southern Indiana
    Posts
    125
    are they after marker valves? very interested I have money in hand!! I'll send PM with info
  8. 09-21-2009, 07:47 PM #8
    pegasus's Avatar
    pegasus
    pegasus is offline shift @ valve float
    Join Date
    Jun 2007
    Location
    Waynesville, Ohio, United States
    Posts
    1,800
    they have the swirls cut out (USED FOR BLOWN ENGINES ONLY) well they will work on NA but not very well
  9. 09-30-2009, 03:59 PM #9
    pegasus's Avatar
    pegasus
    pegasus is offline shift @ valve float
    Join Date
    Jun 2007
    Location
    Waynesville, Ohio, United States
    Posts
    1,800
    350 bump
  10. 10-01-2009, 12:44 PM #10
    pegasus's Avatar
    pegasus
    pegasus is offline shift @ valve float
    Join Date
    Jun 2007
    Location
    Waynesville, Ohio, United States
    Posts
    1,800
    sale pending tonight
  11. 10-01-2009, 09:15 PM #11
    pegasus's Avatar
    pegasus
    pegasus is offline shift @ valve float
    Join Date
    Jun 2007
    Location
    Waynesville, Ohio, United States
    Posts
    1,800
    gone!!
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules