These are the fittings you use to attach aftermarket rails to your factory lines. There are 2 -8 fittings and a 1/8" pipe plug on the pressure side fitting, and a -6 fitting on the return side. They're both stainless, and come with the factory chrome lines.
$35
If you're interested in the braided lines and fittings also, I'll throw those in for another $40. Those include:
1x -8 straight
1x -8 90
a foot or so of -8 line
4x -6 90s
2 lengths of -6 line. 1 for the crossover at the back of the rails, and the other from the front of the driver's side rail to about the passenger's side strut tower. I think I have another piece that goes from your regulator to the return fitting too, but I can't remember what all is down there.
