Page 1 of 3 123 LastLast
Results 1 to 20 of 52

Thread: Ultimate Street 8.5

  1. #1
    Join Date
    Mar 2004
    Location
    cincy
    Posts
    384

    Ultimate Street 8.5

    Final rules


    Must have working headlights, tail lights, Stock appearing interior, carpet, door panels, factory
    "type" dash, stock floor pans, stock firewall.
    single seat ok.
    fiberglass limited to hood and decklid or hatch only. No forward facing scoop
    *SUSPENSION:
    No wheelie bars or 4 link suspension.
    must have stock type suspension with factory frame rail or ladder bar with factory frame rail.
    Coil overs and anti roll ok.
    *TIRES:
    26x8.5 slick. Tires may not be altered
    No front/all wheel drive vehicles
    *POWER ADDERS:
    Single type power adder only.
    nos: 1 fuel / 1 nitrous soleniod
    no multi stages
    no controlling nos flow electronically in any way. must use wot or toggle switch.
    1 nos bottle in car.
    no foggers at all
    double cross bar plates allowed on sb
    nos sb max .082 jet on plate
    nos bb max .068 jet on plate
    Nitrous entries maximum jetting
    Small block, 6cyl
    1 jet - .082
    2 jets - .057
    *FORCED INDUCTION:
    no billet wheels allowed
    max turbo size 76mm measured tip to tip. (no reducers allowed to achieve this size !!!!) no clipped wheels !!!!!!
    max s/c sizes D1,V7,JT,NOVI 2000,KB 3.6
    no boosted bb
    air to air intercooler OR water meth injection with gas only. ( may not use both together)
    air to water allowed with weight penalty . (see weights for description)
    *EXHAUST:
    must have mufflers on all entries except turbo cars.
    *CYLINDER HEAD / ENGINE INDUCTION:
    single 4 bbl no tunnel ram
    23*chevy, 20*ford, 18*mopar, 15*ls, on sb only
    raised port heads or cathedral port ls heads ok with weight penalty. (see weight for description)
    mod motors ok, twisted wedge heads ok ,tfs a460 ok (twisted wedge R heads ok with weight penalty, see weight for description)
    stock block bb only
    bb heads conventional
    buick, pontiac,olds combos can run at sb weight (nos or n/a only)
    no sheetmetal intakes.
    no dry sump oil systems.
    no clutchless type transmissions.
    *FUEL:
    pump gas , race gas , e85 ok
    *ELECTRONICS:
    any ignition box
    no boost controller, no nos controller .
    msd 6530 permitted on all combos.
    digiset allowed on plate only.
    piggy back ok .
    stand alone efi fast or bs3 ok with weight penalty. (see weight for description)
    *WEIGHT:
    v6 - nos 2950
    sb n/a - 2800
    sb nos - 3100 (see nos for allowed combos)
    sb & 6cyl boosted 3250 ( see forced induction for allowed combos)
    bb n/a 3100
    bb nos 3300
    deduct 50lbs for 70mm and smaller turbo or s/c listed in forced induction.
    deduct 50lbs non intercooled
    deduct 50lbs on sb with cast iron heads.
    deduct 100lbs for stock block sb
    deduct 50lbs for stock block bb
    deduct 50lbs for 8.2 deck nitrous cars
    add 50lbs for a/w intercooler
    add 50lbs for twisted wedge R heads
    add 50lbs for stand alone efi (fast & bs3)
    add 50lbs for raised port heads
    add 50lbs for programmable ignition boxes
    add 50 pounds for non stock valve angle sb
    __________________
    XTREME 8.5
    HOUSE OF HORSEPOWER
    S & M MOTORSPORTS
    BARKER MACHINE & FAB
    MAC TOOLS Sam Tino

  2. #2
    Join Date
    Mar 2004
    Location
    colerain
    Posts
    985
    hell ya !!!! is this going to be at edgewater on friday nights still ?????
    house of horspowerold school dirty dozen member back when the list was fast and post counts did not matter !:

  3. #3
    Join Date
    Oct 2004
    Location
    Eastgate
    Posts
    3,367

  4. #4
    Join Date
    Mar 2004
    Location
    cincy
    Posts
    384
    Quote Originally Posted by JASON408 View Post
    hell ya !!!! is this going to be at edgewater on friday nights still ?????
    Yep. And I will post payouts later.

    SPONSORS FOR ULTIMATE STREET 8.5
    S and M MOTORSPORTS
    BARKER MACHINE@FAB
    CINCY SPEED
    VERN HOUSE RACE CARS
    XTREME 8.5
    HOUSE OF HORSEPOWER
    S & M MOTORSPORTS
    BARKER MACHINE & FAB
    MAC TOOLS Sam Tino

  5. #5
    Join Date
    Mar 2004
    Location
    colerain
    Posts
    985
    hell ya heads up racing back at edgewater ... cant wait to see all the bumper draging
    house of horspowerold school dirty dozen member back when the list was fast and post counts did not matter !:

  6. #6
    Join Date
    Feb 2004
    Location
    White Oak, OH
    Posts
    3,816
    Can't wait to get my junk together and have it out to race in this class this season.
    Kilkare xtreme outlawseries X235 2014 Champion and Record Holder
    Dedpedal Racing;Sponsered by Lasota Racing;Tuned by S&M motorsports motorsports
    Boss block 347/225 TFS HP's/SR/BW S476/A2W/PG/FAST xfi on E85
    5.33@134 on a 26x8.5"

  7. #7
    Join Date
    Jul 2010
    Location
    Delhi, OH
    Posts
    442
    So, will this be during the test and tune on Friday nights, or seperate from that?

    Later.
    Ben

  8. #8
    Join Date
    Mar 2004
    Location
    cincy
    Posts
    384
    Quote Originally Posted by skeptiq View Post
    So, will this be during the test and tune on Friday nights, or seperate from that?

    Later.
    Ben
    During test and tune
    XTREME 8.5
    HOUSE OF HORSEPOWER
    S & M MOTORSPORTS
    BARKER MACHINE & FAB
    MAC TOOLS Sam Tino

  9. #9
    Join Date
    Jun 2006
    Location
    Cincinnati,
    Posts
    1,549
    I'm so looking foward to this. Finally getting to meet some of you guys other than buying parts off of.

    I hope to join next year. We will just have to wait and see.

    John

  10. #10
    Join Date
    Feb 2004
    Location
    Fayetteville
    Posts
    1,877
    Why no billet wheels?
    2014 CTS V-sport
    2006-teen Black CCSB Powerstroke

  11. #11
    Join Date
    Feb 2004
    Location
    Springboro, OH
    Posts
    6,325
    When is the first race? What do sponsors provide or have to do?

  12. #12
    Join Date
    Mar 2004
    Location
    colerain
    Posts
    985
    FIRST RACE IS MAY 27 !!!!talk to mike about the sponcership will pm you his number >
    house of horspowerold school dirty dozen member back when the list was fast and post counts did not matter !:

  13. #13
    Join Date
    Feb 2004
    Location
    Springboro, OH
    Posts
    6,325
    Is there a website or something?

  14. #14
    Join Date
    Mar 2004
    Location
    cincy
    Posts
    384
    Quote Originally Posted by NXcoupe View Post
    Is there a website or something?
    Not yet. I have someone working on it.
    XTREME 8.5
    HOUSE OF HORSEPOWER
    S & M MOTORSPORTS
    BARKER MACHINE & FAB
    MAC TOOLS Sam Tino

  15. #15
    Join Date
    Feb 2004
    Location
    Cincy
    Posts
    4,679
    Who ran what last couple weeks

  16. #16
    Join Date
    Mar 2004
    Location
    cincy
    Posts
    384
    Quote Originally Posted by Timido View Post
    Who ran what last couple weeks
    Your old car went 5.82. Yellowstang ran last friday but we dont know what he ran. Thats all I know.
    XTREME 8.5
    HOUSE OF HORSEPOWER
    S & M MOTORSPORTS
    BARKER MACHINE & FAB
    MAC TOOLS Sam Tino

  17. #17
    Join Date
    Jan 2009
    Location
    lebanon
    Posts
    187
    it was somewhere around there but there is something up not sure yet

  18. #18
    Join Date
    Feb 2004
    Location
    Cincy
    Posts
    4,679
    My old car was on big tires I doubt it will hook on little tires

  19. #19
    Join Date
    Sep 2007
    Location
    Northern Kentucky
    Posts
    1,087
    I'm looking forward to watching this.

  20. #20
    Join Date
    Mar 2004
    Location
    cincy
    Posts
    384
    Quote Originally Posted by Timido View Post
    My old car was on big tires I doubt it will hook on little tires
    These are little tires. This was from sat at bluegrass.
    Attached Images Attached Images
    XTREME 8.5
    HOUSE OF HORSEPOWER
    S & M MOTORSPORTS
    BARKER MACHINE & FAB
    MAC TOOLS Sam Tino

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •