Owner of S&M Motorsports
8602 Harrison Pike, Cleves , OH 45002
www.sandmmotorsports.com
Adam@sandmmotorsports.net
513-236-2355
https://fbcdn-sphotos-a-a.akamaihd.n...55701012_n.jpg
You stay on 1.5 pounds and I'll spray the damn house down.
D.S.S. Pro Bullet 331.
#13 Spring Street car shootout.
Big thanks to:
S&M Motorsports tuning and Fab.
Cincy Speed.
Hyper-Performance Motorsports.
Killer Koatings.
My other place.thestaginglane
Owner of S&M Motorsports
8602 Harrison Pike, Cleves , OH 45002
www.sandmmotorsports.com
Adam@sandmmotorsports.net
513-236-2355
https://fbcdn-sphotos-a-a.akamaihd.n...55701012_n.jpg
I got ya covered. Give me the wiggle.
D.S.S. Pro Bullet 331.
#13 Spring Street car shootout.
Big thanks to:
S&M Motorsports tuning and Fab.
Cincy Speed.
Hyper-Performance Motorsports.
Killer Koatings.
My other place.thestaginglane
Kilkare xtreme outlawseries X235 2014 Champion and Record Holder
Dedpedal Racing;Sponsered by Lasota Racing;Tuned by S&M motorsports motorsports
Boss block 347/225 TFS HP's/SR/BW S476/A2W/PG/FAST xfi on E85
5.33@134 on a 26x8.5"
D.S.S. Pro Bullet 331.
#13 Spring Street car shootout.
Big thanks to:
S&M Motorsports tuning and Fab.
Cincy Speed.
Hyper-Performance Motorsports.
Killer Koatings.
My other place.thestaginglane
Owner of S&M Motorsports
8602 Harrison Pike, Cleves , OH 45002
www.sandmmotorsports.com
Adam@sandmmotorsports.net
513-236-2355
https://fbcdn-sphotos-a-a.akamaihd.n...55701012_n.jpg
Hell I just wanna watch lol... What u hoping for low to mid 4s in 1/8
91 Lx coupe, Stock bottom end 5.3, ported 243s, 224r cam, Vic jr, csu blow through, msd 6012, 76mm, th400/brake....
E20 tonight, bunch of sbz's there Still getting it dialed in....
60'... 1.41
330... 4.36
1/8 ... 6.83
mph... 99.34
1000... 8.96
1/4 ... 10.75
mph... 125.54
Last edited by kennebellcobra; 08-17-2012 at 11:31 PM.
94 Cobra, 9.54@141.17 1.32 60' -1.29 best...kennebell 2.2 http://www.youtube.com/watch?v=FAGXfeucShE (sold)
90lx(Flamer)stock 302 iron gt-40's tf stage 1 cam Dynoed 328h 342t 11.57@115.06 (sold)
89 coupe 302 iron gt-40's, 373-363 NO NOS! 10.88@123.3 (Retired)
"New combo"... NA 363, tf 190 11r's, 5spd 9.93@137.88, 3275 lbs (ac/ps)
Dam shannon your getting there, the trap speed is there for sure.
91 Lx coupe, Stock bottom end 5.3, ported 243s, 224r cam, Vic jr, csu blow through, msd 6012, 76mm, th400/brake....
Nice job your just over a second slower than your old cobra wright?
Nice job Shannon! Sorry I couldn't make it.
Great job Jack!!! Hell wait til the cold air gets here!!!
911 - Government sponsored Dial-a-Prayer
If guns cause crime, then pencils cause misspelled words
https://youtu.be/apTCdfr0bn4
347, AFM N-91 cam,TFS FAC 190's, Quick Fuel 750 carb, Parker Funnel, 4.30 and E-85
2011 UMTR Street Stick Points Champion
2012 UMTR Quick Stick 4th Place(Points)
2013 UMTR Quick Stick 2nd Place (Points)
2014 UMTR Quick Stick 2nd Place (points)
made one hit tonight to do my last of 3 license passes 9.80@147
[B]2015 Mustang GT - 8.40@170
2022 F150 10.76
www.beefcakeracing.com for all your late model Mustang, Hemi and Camaro Exhaust / Supercharger / Suspension and suspension needs.
Did a 12.9@112 with a 2.0 60'
Today at the shoot out I went: 10.994 at 128.92 with a 1.668 60'
If I could get back all the money I wasted on cars...... I would waste it on cars.
I had a new PB at the fall shootout. I think about all the Stangbanger was there. I am the driver on the left.
2011 5.0 with a couple turbos.
Best ET 8.87 lifting....
Tonight at UMTR Stick Shift Nationals we wont talk about the -.001 red.
rt = -.001
60 = 1.429
1/8 = 6.869
mph = 100.30
1/4 = 10.758
mph = 126.40
witnessed by Rich, Shannon, Rick, Steve
1990 ssp black coupe (aka ROCKET), bone stock CI unported E7's plus full mac exhaust, water pump and crank pullies, synthetic fluids, 14 degrees of timing, 80 mm maf, power pipe, 65 mm throttle body, 4.10 gear, welds and skinnies plus suspension. Best et to date 12.41, best mph to date 106.58 with a best 60ft of 1.59 on 26/8.5/15 Mickey Thompson slicks on a 64 degree day with 35% humidity all with 260rwhp and 320rwtq
There are currently 1 users browsing this thread. (0 members and 1 guests)