Need to finish plumbing the fuel, trans cooler, NOS, wire in the ignition, cooling fans, fuel pump, trans brake and gauges. I'm sure there is a little more but this will get me to the point I can think about firing it up Brian.
Starting all over, Again!
Need to finish plumbing the fuel, trans cooler, NOS, wire in the ignition, cooling fans, fuel pump, trans brake and gauges. I'm sure there is a little more but this will get me to the point I can think about firing it up Brian.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Registered User
Nos. The engine is going to be to fast for u. Lol. Hopefully while im laid off for a few weeks we can get it done. Unless mine still have issues Iwwill be to depressed to help. Lol
Starting all over, Again!
It will be different compared to what we are used to but scared, not sure about all of that. You will be here whether you like it or not and this will be running by this spring.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Registered User
Lol I know. Someone has to get it done.
Starting all over, Again!
Did some work tonight on this, started plumbing the trans cooling lines from the trans. Have the fans mounted and some photos of the fuel lines running through the frame rail.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Registered User
Looks like your making good progress.
Is the hose end in the last picture not on all the way? The one going into the frame rail.
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Starting all over, Again!
Yup, I will keep picking at it until it's go time.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Starting all over, Again!
Correct Brian, it is mocked up to insure fitment. I'm going to put something around the edges to keep the fuel line from being cut. Therefor, I will pull it back off to do that then re-install it completely.Originally Posted by draggin50
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Registered User
That's what I thought. Its looking good though! It looks like you don't have much left. If I could get time Id swing down and help out.
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Starting all over, Again!
Well, even if you just get some time to stop by, do so.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Registered User
Will do! Id like to check out the car! Gonna be pretty cool when its done!
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Starting all over, Again!
Finished the trans cooling lines last night, now on to the fuel lines.
One step closer to getting this thing running.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Registered User
12s here you come. Cant wait to see the front end come up and you pucker up.
Starting all over, Again!
12's huh, as long as it doesn't blow up, that will be a step in getting it to go down the track safely.
12's idling maybe, Lol
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Starting all over, Again!
I have believe it or not been working on the coupe, little by little. This car must being running by spring, God help me succeed...
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Registered User
:-)
Starting all over, Again!
I couple photos of some more progress, little by little and this will get finished.
Messing with how I'm going to run the wires, I think I'm going to run them from the back side.
I as well have mounted the fuel pressure regulator up front permanently with existing brackets.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Starting all over, Again!
The fuel lines from the regulator to the carb are now installed as well. Another tiny step toward getting this thing running.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Registered User
Looking good!!! This thing will be ready to fire before ya know it!!
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Starting all over, Again!
Thanks Brian, I couldn't wait on you any longer. Just kidding, LOL
I'm doing my best to get this thing ready and track worthy.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
There are currently 4 users browsing this thread. (0 members and 4 guests)
Posting Permissions
Reply With Quote
