I need to get my head out of my ass and get mine done. Gear is in, but I still need to get the lower pulley on, injectors ordered and installed, and back on the dyno.
Then Im sure I will need a better cage... Where does it end?
I need to get my head out of my ass and get mine done. Gear is in, but I still need to get the lower pulley on, injectors ordered and installed, and back on the dyno.
Then Im sure I will need a better cage... Where does it end?
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
The 9.90's are waiting for you Brian, they won't go anywhere!
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Yeah I guess that's one way of looking at it! The sooner the better though!!
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
I don't think they'll bitch about going .2 faster than your cage is certified. At least you have one lol.
I just hate to deal with it. Id rather be safe up front. Most of the time, its another racer that bitches about it that gets you looked at.
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Good luck on the roll bar if you get into the 9s. Every time I ran my Mustang there I was kicked out until I got the 8.50 cert cage. It's the only reason I did it. Had the same problem at KK as well.
2011 5.0 with a couple turbos.
Best ET 8.87 lifting....
It's weird that they pick and choose who their going bitch at. I've seen guys run 8's with no cage or roll bar.
Edgewater bitched at me for no roll bar padding, keep that in mind too.
Rick
Rick90lx@yahoo-dot-com
6.27625 liters of turbocharged goodness
I got the same thing for that Rick. No roll bar padding and I had to stay under 11.50's.
First pass was a 10.80 I think and they didn't say to slow down so I didn't.
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
I got bitched at for no cage as well after I went back to back 9.7s in the eclipse early in the year. Went back with the new motor and they got on me for no roll padding in tech. Went 9.7 then a 9.57 and never heard anything that day, but I loaded it up and didn't push my luck any more. The next weekend they asked for NHRA license and got on me for my cage, limited me to 6.5s in the 1/8 and 10.0s in the 1/4 that day.
License... Now there is another thing I need to get if it picks up much. Where does it end?
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
I'm just going to build mine as fast as I can. If I go to the track I'll probably go to clay city or Thornhill. They don't have cage restrictions. I hear Tristate is pretty laid back. Plus my buddy just bought Vengeance racing's 1500rwhp twin turbo z06. With recent mods it made 1780rwhp. We've been talking about doing the 1/2 mile events. They don't have cage restrictions like the drag strips.
http://www.corvetteforum.com/forums/...-pump-gas.html
Last edited by USMCPONY; 01-19-2016 at 04:04 AM.
They all have cage requirements but whether or not they choose to enforcement is something entirely different.
They who can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. - Ben Franklin
1998 Mustang GT
Coyote Swapped
With all the crashes lately, Id rather be safe. I can think of a few right off that wouldn't be here without a cage.
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
All this HP & $$$$$ you guys are adding/spending and you are NOT putting in a cage?? Thats just stupid. Let me know how that works out for ya when you lose traction and go head first into the wall and barrel roll down the strip.
Case in point....
https://www.youtube.com/watch?v=r7STt_6I5Dw
http://stangbang.tripod.com/ Where all this began!
http://stangbang.tripod.com/twisted/ Vinny
1984 Mustang build @craig_btr on Instagram
http://stangbang.tripod.com/ Where all this began!
http://stangbang.tripod.com/twisted/ Vinny
1984 Mustang build @craig_btr on Instagram
They who can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. - Ben Franklin
1998 Mustang GT
Coyote Swapped
yes, you'll def start getting some heat at that power level.
me too, we got the holley sorted out this weekend, 23 hours to get all 8 cylinders going,
turns out holley had the cylinders marked wrong on the plug and play harness.. so much for plug and play lol
we need to call up them okc boys and get something going
[B]2015 Mustang GT - 8.40@170
2022 F150 10.76
www.beefcakeracing.com for all your late model Mustang, Hemi and Camaro Exhaust / Supercharger / Suspension and suspension needs.
we need to call up them okc boys and get something going[/QUOTE]
I'm good with that! Lol
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
There are currently 1 users browsing this thread. (0 members and 1 guests)