It Will Get There .
Registered User
It Will Get There .
Starting all over, Again!
Yeah, it will eventually again. Lol
Tore it all back apart to clean up the wiring, install the Grant steering wheel, Grant quick release and install the MSD Power Grid ignition controller.
And paint the roll cage behind the dash, then get it running again prior to installing the NOS.
Last edited by 2Fast4You; 01-20-2016 at 10:14 AM.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Registered User
Ultra light weight dash I see!!!
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Registered User
Weight reduction level 5000
Starting all over, Again!
New composite I came across! LolOriginally Posted by draggin50
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Starting all over, Again!
Removed the 3-Step and selector switches in place of this, should give me much more functionality with tunability and logging.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Starting all over, Again!
So I decided to relocate the relays from the trunk area and move them up front to be more accessible if needed.
So I mounted them with the terminal blocks on the backside of the panel for the ignition and switch panel.
It eliminates additional wiring running too and from the back and looks much cleaner.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Starting all over, Again!
Got it back together and it runs once again, I must have done something correct with the initial set up on the Power Grid Ignition Controller. Lol
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
RIP Vinny
Now that it is running, time to get Chris to lay on that Sunset Pearl!
Why I decided to cut this up, is beyond me...
But Im sure you will have it looking great again!!
http://stangbang.tripod.com/ Where all this began!
http://stangbang.tripod.com/twisted/ Vinny
1984 Mustang build @craig_btr on Instagram
Starting all over, Again!
I will Craig, all in good time!
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
RIP Vinny
Sell that Damn motorcycle so you can get the coupe painted!
http://stangbang.tripod.com/ Where all this began!
http://stangbang.tripod.com/twisted/ Vinny
1984 Mustang build @craig_btr on Instagram
Registered User
You still have that bike?
Im with Craig! Move that thing and get the coupe painted! It would look good!!
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Starting all over, Again!
Yeah, it's up for sale if you know anyone interested.
- - - Updated - - -
Yeah, it's up for sale if you know anyone interested.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Starting all over, Again!
The E85Carbs.com conversion is complete, it still runs but needs some fine tuning. Can't wait to see how this Ethanol based fuel works for me! Lol
Last edited by 2Fast4You; 03-03-2016 at 06:32 PM.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Registered User
Do you have to run a flex fuel sensor? I'm curious how it would run on a winter blend vs a summer blend.
RIP Vinny
Thats for EFI only.
http://stangbang.tripod.com/ Where all this began!
http://stangbang.tripod.com/twisted/ Vinny
1984 Mustang build @craig_btr on Instagram
Starting all over, Again!
No flex fuel sensor as Maximus (AKA-Craig Lol) stated, is there such a thing as winter and summer blend?
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Registered User
Out of the pump there is. Just have to test it to see where it stands.
I never test any I get. Mikey said he did at first but then just quit. Said there wasn't that much difference where he got it.
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
RIP Vinny
There is. We have seen anywhere from E65-E85.
You can always get this to test your E....
http://www.jegs.com/i/Holley/510/26-147/10002/-1
http://stangbang.tripod.com/ Where all this began!
http://stangbang.tripod.com/twisted/ Vinny
1984 Mustang build @craig_btr on Instagram
Starting all over, Again!
I know that there can be a fluctuation in the grade, is it really based on the time of year(summer-winter)?
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
There are currently 4 users browsing this thread. (0 members and 4 guests)
Posting Permissions
Reply With Quote
