I picked up a 91 GT roller and Ill be needing some parts...
Drive shaft
Draglites
Tubular K member and A arms
A9L computer
gray interior parts
catback exhaust
front seats
good stock 5.0 engine
cam
I picked up a 91 GT roller and Ill be needing some parts...
Drive shaft
Draglites
Tubular K member and A arms
A9L computer
gray interior parts
catback exhaust
front seats
good stock 5.0 engine
cam
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
I have a few gray interior parts. Pm at 513 257 1584
Brian I'll have grey interior minus seats for sale
What u buildings now buddy. A nice little cruiser.
Just an old 91 GT. Nothing nice that's for sure! Im just gonna try to go fast in a beater!
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Brian I have a good A9L I took out of the coupe. The seal has never been broken on it also have a MAC pro chamber and possibly sell the mac catback off the car.
1992 lx 5.0 5 speed stock and slow but looks good!
I found a computer. Might be interested in the exhaust though.
Also I need a set of 94-95 spindles and a nice drivers side LX tail light.
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Brian I have a good A9L I took out of the coupe. The seal has never been broken on it also have a MAC pro chamber and possibly sell the mac catback off the car.
1992 lx 5.0 5 speed stock and slow but looks good!
Also need a nice drivers side LX tail light...
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
I hope you can find parts better than I can Brian
Im looking for cheap parts!!! Those are pretty easy to find!
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Ill look tomorrow but i might have a stock driveshaft you can have
Cool! Thanks!
Ill still need to get with a few guys on some parts. Busy with work again...
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Still need parts....
Good 5.0 complete, driveshaft, drivers side LX tail light, cat back, K member and A arms, cam, and FI intake. Project scrap pile is in need!!! The cheaper the better!
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Sure am... What cams you have? How much for one of the explorer intakes? Sucks I just sold one to Jesse... The story of my life!
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Would $80 work for an Explorer upper and lower ? I've got a Lunati 51014 cam if you want it ? I'd need $100 for it....
Just let me know and sorry about the delay in responding !! You can text me at Five One Three 3154698.
I've got a 347 short block and aluminum cyl heads as well if you need ....I'd go through the short block though. Only has approx 500 miles on it but kept getting silver sparkly flecks in the oil.
-Scott
Last edited by Gearhead; 04-17-2018 at 08:55 PM.
-----------------------------------------
Scott
93 Coupe
66 Fastback
Looking for more parts...
Hose from the valve cover to the throttle body
Intake hose from the mass air meter to the throttle body
Drivers side LX tail light
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Brian I have the hose that runs from the throttle body to the valve cover fill tube and I have a stock inlet tube from throttle body to mass air if it will work. I have a stock meter and airbox and all I have the A9L out of the car as well if you know anyone needing one.
1992 lx 5.0 5 speed stock and slow but looks good!
That would work for me. I have a C&L mass air meter already and the A9L.
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
There are currently 1 users browsing this thread. (0 members and 1 guests)