Project Round 4

[NXcoupe]

Nice. Love that color. Car is flying.

[draggin50]

Nice! That'll be 11's for sure with that trap

I think it has it in it as it sits, just think it should be a lot quicker.

It's doing pretty good I think for the amount of timing you are running right now, get that 60' sorted and it'll run 11s easy as it sits.

More timing would pick it up I think. Need to get it back on the dyno and see what it does.

[draggin50]

Nice. Love that color. Car is flying.

Thanks Mike. I need to get with you sometime and get this thing tuned. Now that I have the timing set right. Its been a fun car so far. Ive probably put more miles on this one than any other Ive had.

[NXcoupe]

Well, let's do it. Just get with me and we'll work it out.

[draggin50]

Not much updates lately on this one. Just been driving it and enjoying it when I can.

I still have some decisions to make coming up here soon figuring out which car I want to build. I don't ever plan on getting rid of the red coupe so its still in the back of my mind.

My ZSR 427 rotating assembly is done and shipped. Should be here Monday. Took since May but its done! I did have to upgrade to the Molnar power adder plus rods from the regular power adder rods. So Molnar crank, power adder plus rods, and Diamond pistons. I have the Innovators West balancer, Moroso pan, oil pump, pick up, and timing cover here now. Zach has my cam in work so it will be here before long too with my timing set. Heads and intake will be ordered Monday. May step up and go with the 240 High ports instead of the 225's. Still not sure which intake I want to run. Toss up between the Holley Hi ram, Super Victor EFI, or the TFS box intake. Decisions, decisions!!!

[PKFIRE]

Not much updates lately on this one. Just been driving it and enjoying it when I can.

I still have some decisions to make coming up here soon figuring out which car I want to build. I don't ever plan on getting rid of the red coupe so its still in the back of my mind.

My ZSR 427 rotating assembly is done and shipped. Should be here Monday. Took since May but its done! I did have to upgrade to the Molnar power adder plus rods from the regular power adder rods. So Molnar crank, power adder plus rods, and Diamond pistons. I have the Innovators West balancer, Moroso pan, oil pump, pick up, and timing cover here now. Zach has my cam in work so it will be here before long too with my timing set. Heads and intake will be ordered Monday. May step up and go with the 240 High ports instead of the 225's. Still not sure which intake I want to run. Toss up between the Holley Hi ram, Super Victor EFI, or the TFS box intake. Decisions, decisions!!!

Can’t wait to hear that fire up! Sounds like a monster!

[Kwik92GT]

Not much updates lately on this one. Just been driving it and enjoying it when I can.

I still have some decisions to make coming up here soon figuring out which car I want to build. I don't ever plan on getting rid of the red coupe so its still in the back of my mind.

My ZSR 427 rotating assembly is done and shipped. Should be here Monday. Took since May but its done! I did have to upgrade to the Molnar power adder plus rods from the regular power adder rods. So Molnar crank, power adder plus rods, and Diamond pistons. I have the Innovators West balancer, Moroso pan, oil pump, pick up, and timing cover here now. Zach has my cam in work so it will be here before long too with my timing set. Heads and intake will be ordered Monday. May step up and go with the 240 High ports instead of the 225's. Still not sure which intake I want to run. Toss up between the Holley Hi ram, Super Victor EFI, or the TFS box intake. Decisions, decisions!!!

That's gonna be a rowdy bitch.

Hi-Ram with Tick Performance or Shearer Fab a/w intercooler would be sweet.

[draggin50]

That's gonna be a rowdy bitch.

Hi-Ram with Tick Performance or Shearer Fab a/w intercooler would be sweet.

Ive been looking at the Shearer Fab and Hi Ram. That's most likely the way I will go. I ended up getting the 225 Highports. Probably be a month or so on them.

Going to get with Barker's today to see about getting it all dropped off.

[draggin50]

Cam came today.
20211024_083759 by Brian Mcwhorter, on Flickr
Starting to pile up! Once the heads show up, Ill drop it off to be built.
20211022_181844 by Brian Mcwhorter, on Flickr

[draggin50]

Well now that I have nothing to put this in since I sold this car., Maybe Ill figure out what Im going to do soon.

I know its cheaper to buy a turn key car but I really don't need 3. I gave the oldest boy the Fairlane so that's one less to deal with. Still have the S10 that me and the youngest boy is going to build. That's another one for down the road...

Anyways, my heads finally shipped today. Rockers are following them. Down to just the intake which is still on back order. Go figure. Guess once the heads get here, Ill drop it off to Barkers and atleast have this ready if I ever pull my head out of my ass and figure out what Im doing.

[k062693w]

Got an intake and goodies that'd be nice for that !!!

[draggin50]

9.5 deck intake?

[k062693w]

9.5 deck intake?

Could be with a different base !!! LOL

[NXcoupe]

I think this one has already found a new home.

[draggin50]

I think this one has already found a new home.

Car has. Now I have nothing to put the 427 in except for the coupe.

[draggin50]

Holley Hi Ram intake finally showed up.

May just put all this into the Gould car eventually and put the 347 in the coupe. Still trying to figure out what Im doing.
20220214_170545 by Brian Mcwhorter, on Flickr
20220214_194504 by Brian Mcwhorter, on Flickr
20220106_172216 by Brian Mcwhorter, on Flickr
20220106_172745 by Brian Mcwhorter, on Flickr
20220106_172425 by Brian Mcwhorter, on Flickr

[PKFIRE]

If you don’t figure it out dropping those parts off at my house would be perfectly fine,lol.

[draggin50]

If you don’t figure it out dropping those parts off at my house would be perfectly fine,lol.

LOL, I have to do something to keep up with you and the brick! Probably still wont have enough!

[PKFIRE]

LOL, I have to do something to keep up with you and the brick! Probably still wont have enough!

Not really sure how fast the Volvo will end up being. You might beat me by your building experience. I still need to get all these parts to agree with eachother.

[draggin50]

You'll do just fine! Once you start getting it sorted out, its gonna run good. It don't take much to make a LS fly.