Here we are, all these years later. I am going to finish this car and sell it. It has a lot of mixed emotions with it, I really just want it gone. This was supposed to be a 6 month turn and burn, and here I am 8 years later, and it still isn't finished. That changes now. Neil has been instrumental in helping me get this thing to the point it is now. I go out and work on stuff through the week and on weekends, with the goal being to have it for sale at the spring swap. The big hold up now is the steering shaft from Maximum Motorsports. I ordered it in December, and still don't have it. I called today and they said possibly in three weeks.

I hated the roll cage, just hated it. The passenger side interior quarter panel plastic was in really bad shape, the driver's side wasn't as bad. I bought a nice one, but the old one just would not come out. Turns out the bar was closer on that side, and the panel just would NOT slide out no matter how I tried it. I wasted a lot of time on it and finally, out came the sawz all. I sliced it off the mounting plate flush, and then used a come along to pull the bar over out of the way. I got the old panel out, new panel in, and then released the strap. I put my antique port a power in and positioned the bar to its new location after I had ground the plate down and the bottom of the bar. I laid a great bead on it and called it done. Since then, I had to pull the panel out AGAIN, but this time, it slid right out because of the new location.
NOTE: The panels look like two different shades, but they are not. Both are out of a 91/92.