Page 6 of 9 FirstFirst ... 23456789 LastLast
Results 101 to 120 of 172

Thread: 1992 Coupe project

  1. #101
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Put a set of 5 lug Moser axles in and installed a girdle.
    20200726_180033 by Brian Mcwhorter, on Flickr
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  2. #102
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Just what I needed... Another project. 1964 Fairlane 500. Im digging this one though. Had a set of the cheap Jegs wheels so I put them on since the others were flat. All the trim was in the trunk. Just going to put a 302 and C4 in this one and drive it once I figure out what kind of cheap paint I can throw on it. Its a rough old car but pretty cool.

    Also picked up a 67 Fairlane too but I may just move that one down the road since I have this one now.
    20200725_200530 by Brian Mcwhorter, on Flickr
    20200725_160048 by Brian Mcwhorter, on Flickr
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  3. #103
    Join Date
    Jul 2015
    Posts
    450
    My dad says he likes your 68 mustang seats in the 64. Good mod


    Sent from my iPhone using Tapatalk
    #2 - 2020 DD Challenge List

    1997 Cobra - C heads, Cams, Sullivan intake, long tubes, homemade cai, 4.30, strange axles, e85, chromoly cage
    2000 Saleen S281SC - factory "stock"

  4. #104
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    We looked at them today and we thought that was what they were. Good to know 100%!
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  5. #105
    Join Date
    Jun 2011
    Location
    Leesburg Ohio
    Posts
    125
    Let's see the 67 Fairlane!!
    SLO.....

  6. #106
    Join Date
    Feb 2004
    Posts
    10,756
    The Fairlane needs its own Build Thread!
    http://stangbang.tripod.com/ Where all this began!
    http://stangbang.tripod.com/twisted/ Vinny
    1984 Mustang build @craig_btr on Instagram

  7. #107
    Join Date
    Jan 2010
    Location
    Pittsburgh, PA
    Posts
    298
    Love this thread!

  8. #108
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    The 67 Fairlane. May sell this one so I can focus more on the 64 and all the other Mustangs here.

    20200719_171332 by Brian Mcwhorter, on Flickr
    20200719_171349 by Brian Mcwhorter, on Flickr
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  9. #109
    Join Date
    Sep 2007
    Location
    Blanchester, Oh
    Posts
    680
    I dig the Fairlane, favorite body style of the years. Good scores!
    1970 Ford F100 SWB - good old 300-6, 3spd...302 to come with balls...

    2015 F150 Super Crew- 5.0, Race Red, 4x4, 6" lift on 35's, magnaflow exhaust, true duals and CAI to be added in the future

  10. #110
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Quote Originally Posted by motox159 View Post
    I dig the Fairlane, favorite body style of the years. Good scores!
    I was happy finding them both! They are getting harder to find.

    Ive always wanted a Thunderbolt clone so now's my chance! It will just be a cruiser, nothing special. Still just a cool old car. The 67 is still up in the air. That would make a cool gasser!
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  11. #111
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Rear end is all back together now. Will be putting a set of Mk 7, 5 lug front rotors on tomorrow. Got tires on the front Bogart wheels so I may put them on this on for now. May try to get it fired up this week. Im not far off from having it running.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  12. #112
    Join Date
    Jan 2008
    Posts
    8,828
    nice

  13. #113
    Join Date
    Feb 2004
    Location
    Troy, Ohio
    Posts
    1,445
    Ready to see this back out soon and see how it does with all of the improvements.
    Greg
    Midnight Mafia

  14. #114
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Id be happy right around 500 to the wheels. I think that's realistic.

    I still need to address the fuel system. Id like to switch over to E85 also.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  15. #115
    Join Date
    Feb 2004
    Location
    Springboro, OH
    Posts
    6,275
    I have some stuff for sale. Pump, filters, etc.

  16. #116
    Join Date
    Aug 2011
    Location
    Manchester, OH
    Posts
    607
    Have you seen the holley 525lph drop in fuel hat/pump assembly its $300 and looks like a nice setup
    1992 lx 5.0 5 speed stock and slow but looks good!

  17. #117
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Quote Originally Posted by slow86fiveoh View Post
    Have you seen the holley 525lph drop in fuel hat/pump assembly its $300 and looks like a nice setup
    Got a link to it? I havent seen it.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  18. #118
    Join Date
    Aug 2011
    Location
    Manchester, OH
    Posts
    607
    1992 lx 5.0 5 speed stock and slow but looks good!

  19. #119
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Quote Originally Posted by NXcoupe View Post
    I have some stuff for sale. Pump, filters, etc.
    Ill get with you and see what all you have. I need a lot!!

    Quote Originally Posted by slow86fiveoh View Post
    Thanks! Ill check it out tomorrow while sitting at work bored! I know the 255 wont cut it for what I want.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  20. #120
    Join Date
    Feb 2004
    Location
    Germantown
    Posts
    5,675
    Quote Originally Posted by slow86fiveoh View Post
    Have you seen the holley 525lph drop in fuel hat/pump assembly its $300 and looks like a nice setup
    That's pretty slick! Man have fuel pumps come a long way!
    Rick

    Rick90lx@yahoo-dot-com
    6.27625 liters of turbocharged goodness


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •