Project: Doing it myself

[USMCPONY]

http://www.amazon.com/MICRO-MESH-SANDING-SHEETS-INTRODUCTORY/dp/B000H6HIK2

It goes from 1500 grit to 12000 grit and includes a foam pad and compound. Works good I think. We use it on aircraft windows at work also. Removes scratches pretty good.

Im at 3000 grit and then a cotton cloth. If that could fit my 16v drill. I'd get it. Heck my 3000 grit pad is very smooth. Feels like a normal piece of paper.

[draggin50]

This is all hand polishing. I don't think they make anything to fit a drill.

[USMCPONY]

This is all hand polishing. I don't think they make anything to fit a drill.

I might be able to use that on my throttle body.

[USMCPONY]

Got my carbon fiber diffuser in. Manufacturer claims 450+lbs of down force and drop 60lbs in weight.

http://i.imgur.com/apO7jWM.jpg

http://i.imgur.com/I9Eg1ki.jpg

http://i.imgur.com/2fyVtrp.jpg


Should look something like this when installed. I can go with a dual 4"tip or a custom large single tip.

http://www.z06vette.com/forums/attachments/f64/3672d1309063231-anyone-know-what-exhuast-splitter-5862082929_b7723c1365_b.jpg

http://cimg3.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/720x405/80-r8yx5gk_38f78cbebe67c60695b9bb5dd57144d724ca240e.j pg

[draggin50]

Wow that is nice!!! Id hate to even see the price of those! Going to look good though!

[USMCPONY]

I seen a fiberglass one in person and it looked sick. I'm assuming the carbon fiber would look even better.

[draggin50]

Yeah Id say it will. I like the look of the carbon fiber one myself. And to save 60 lbs is impressive as well.

[USMCPONY]

That how I like to lighten up my cars. By buying nicer stronger/lighter parts rather than stripping things out. Its a win win win situation.

[draggin50]

Yeah that's one way of looking at it. With a car that nice, I wouldn't (or couldn't) bring myself to gutting it. That's for sure!

- - - Updated - - -

Any word on the cage idea?

[USMCPONY]

If I cut it up I know I'll regret it. Haven't decided on a cage yet. I'm not sure how much I'm going to track it. If I blow this motor. I'll probably jump off a cliff

[draggin50]

I bet! You have some good parts so Im sure it will hold some power.

[Rick93coupe]

Got my carbon fiber diffuser in. Manufacturer claims 450+lbs of down force and drop 60lbs in weight.

http://i.imgur.com/apO7jWM.jpg

http://i.imgur.com/I9Eg1ki.jpg

http://i.imgur.com/2fyVtrp.jpg


Should look something like this when installed. I can go with a dual 4"tip or a custom large single tip.

http://www.z06vette.com/forums/attachments/f64/3672d1309063231-anyone-know-what-exhuast-splitter-5862082929_b7723c1365_b.jpg

http://cimg3.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/720x405/80-r8yx5gk_38f78cbebe67c60695b9bb5dd57144d724ca240e.j pg


Stop making me like Chevy stuff! That's badass.

[USMCPONY]

If it's American or exotic. Odds are I probably like it.

[USMCPONY]

She's all put together and ready for heads. Still waiting on them.

http://cimg0.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/978x1117/80-received_468018976726920_2_26e2f53fe2bb1c1bff2127b 543b2b6a6d7a3e47b.jpg


http://cimg1.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/887x1577/80-received_468150896713728_6f986b82013895d062ec726d1 57fd45fd8a54235.jpeg

[draggin50]

Damn!!!! Gonna be nasty!!!!

[USMCPONY]

Hoping to break 400rwhp

[draggin50]

X3 maybe!

[PKFIRE]

Hoping to break 400rwhp

At 1500 rpm!!!!

[draggin50]

This guy is a sandbagger!!!

[USMCPONY]

I'd never do that

[USMCPONY]

Got a couple pictures of the top side. I can't wait til the heads get here. I hate waiting for parts.

http://cimg6.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/898x1596/80-received_468340543361430_4a79837a0d9d8473326faa3a4 0413d3f03532db3.jpeg

http://cimg6.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1590x894/80-received_468340546694763_024bdfaf0919afdd4f0bbc541 38abd200cc6ea26.jpeg

[SN95N/A]

I feel bad for the guys on the list LOL

[cyah92]

It's going to be a nasty list this year. Can't wait.

[USMCPONY]

There's going to be some fast guys. I bet four or more are going to be in the 8's. I'll be lucky to be in the top 5.

[draggin50]

Im sure its going to run real good! May be a one hit wonder without a cage unless Tristate opens back up.

[USMCPONY]

I'll probably just do the Thornhill arm drop races. They don't require a cage there.

[USMCPONY]

Finally! After 5 month wait. All my parts are here.

http://cimg0.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x833/80-snapchat_3754230208778405701_1_396b62e67c1e0eba0ae a24d53d19cb0a6972a0ea.jpg

http://cimg1.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x987/80-snapchat_5089897317695666491_1_1_57f6f12a749e120d7 894215e7b66b15ebb3e1725.jpg

[draggin50]

Heads look nice! Should run real good! Maybe if Tristate gets opened back up, Ill see it make some passes this year. Thornhill is a drive for me.

[USMCPONY]

Does tristate have the rules that E20 has or are they more lenient?

[Kwik92GT]

Rules?? What are these rules you speak of?? :lol:

[USMCPONY]

Rules that only apply to whoever they choose to bitch at. Such as a car can run 9.1 at 155 mph without a cage over and over again. But then a another guy runs 11.1at 130 mph and he gets kicked out. I just want to run a couple good runs and that'll probably be it for me. I can't afford to break this thing right now.

[draggin50]

Tristate has been real easy as far as tech the few times I ran there. "You have a catch can"? "Yep". "Your good then"!!! That's all they cared about. Not being sanctioned by NHRA makes it easier. IHRA vs NHRA.

[USMCPONY]

I've never been there but it would be nice to be able to run all out without getting in trouble. I just want to run a couple times and that's it. When I ran at KK I hit the brakes right around the 800'-900' and ran a 10.4 @ 90mph and when the guy gave me my time slip he was shaking his head when I was still driving up and said, "You just had to stay in it didn't you?! Don't do it again!" I honestly thought i was going to run a 11.5 or slower. To get a car to run fast and be legal to run gets stupid expensive. I'm at the point where I'm done throwing money at this thing. I could of had a Lamborghini Gallardo at this point.

[draggin50]

The money gets out of hand quick at those power levels. Safety isn't no joke though. There has been a lot of people wreck and even die lately due to the lack of equipment.

Lyle Barnett has a very good video out since his wreck. Granted he was running 4.0's at close to 200 mph. The biggest thing is to live and race another day.

https://www.youtube.com/watch?v=rm3DFI9ERlY

[USMCPONY]

True. Since I don't have a cage I only want to get a couple good runs in and be done until I get what I need. I need a built rearend, 15" wheel conversion, carbon drive shaft, and a 8 point cage. The cage is $5500 since its wrapped in leather. They have to fit it perfect (which I want) and its going to cost allot more $$$$$$. This may be a few year project to get it where I want/need it.

[draggin50]

If your going to do it, might as well do it right and how you want it. No reason to cut corners.

[cstreu1026]

Isn't it going to be hard to certify a cage wrapped in leather?

[draggin50]

Certified then wrapped is probably how it will be done. Then a spot left open for the sticker.

[USMCPONY]

Sorry. The dash is wrapped in leather. They're going to have to cut it and form it around the cage. Which is going to take allot of time apparently. Also id like to get the cage wrapped in leather as well but that's not included in the price.

[USMCPONY]

Ran into another issue. ERL made 3/8" 5th and 6th bolts and LME drilled the head for 8mm. So now I have to drill and tap the heads. Not looking forward to cutting up these heads.

[draggin50]

What are those holes for? That would suck!

[USMCPONY]

The block is a 6 bolt block. The 5th and 6th bolts on the block don't match the heads.

[draggin50]

Oh ok. I got ya now.

[PKFIRE]

Bummer

[USMCPONY]

Starting to look like a motor again.

http://cimg0.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x1116/80-snapchat_5276414137969677870_1_732aa641d293f758f72 c92160273e1cb4484a6e7.jpg

http://cimg3.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1021x1029/80-snapchat_6043510178138794066_1_4a035e6f42527e922d0 6cf5dc21a18c2806c094d.jpg

http://cimg5.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/992x1054/80-snapchat_3555549104903338592_1_f7ceb116167e59a5173 56b42e797b1521fb3f56c.jpg

[draggin50]

Damn that looks good!!

[SN95N/A]

Sexy LOL

[PKFIRE]

That motor looks amazing!

[USMCPONY]

Been kind of slacking with updates. I got behind waiting on fittings for the intake and fuel system. I also custom made a four point stream vent system to help with cooling. I'll post pictures of it when I get a chance. The fuel pumps are in. Now I just have to put it back together. Only took me a little over a hour to put them in.

http://cimg3.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x1920/80-snapchat_881308747974573462_be268eef8c194822726d07 023efbe802ca49c0c5.jpg

http://cimg2.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x1299/80-snapchat_2301585093011848976_1_88b47f619a5262c44f7 26c9bebf6bdef4c7a887d.jpg

http://cimg8.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x1080/80-snapchat_6639819542510961784_1_a46b5203eac92d9de46 758f522fb44ba7ec8aaae.jpg

http://cimg0.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x1080/80-snapchat_2172882005477093111_1_69d0cdf763668fac49c 6f8326f6d82510adad2a9.jpg

http://cimg1.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/990x944/80-snapchat_5777895073639395561_1_ec64933a9cfbb5a3567 6914345953877f92e6a5f.jpg

http://cimg2.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1045x935/80-snapchat_5717330677200914203_1_ae41b467f66c0d7e1a4 90a07c76e6fcb5b2b06e7.jpg

http://cimg5.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x1080/80-snapchat_8525890681673273742_1_613b481bbc60e92984c 3c31ecef95abb75d76b73.jpg

[k062693w]

Damn that's a Pretty Flipping Engine !!!

[Yellow98Cobra]

Looks to purty to drive. Needs a clear hood.

[draggin50]

Damn that looks good! Im ready for some video of it running! Gonna be nasty as hell!

[USMCPONY]

I picked up a new buffing wheel and its the shit!


http://cimg0.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x1184/80-snapchat_7900456112441878888_1_ff6134c8f1de701d05c c959f6dd106cdd57f936c.jpg

http://cimg1.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x1230/80-snapchat_9031326293510612337_1_6ecda5304a4f2538527 a0080722f2128e3d37257.jpg

http://cimg2.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1021x895/80-snapchat_3615222038847851635_1_b23ae54411b93a97d97 360caf21826f6bcbb24a9.jpg

http://cimg3.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x1231/80-snapchat_2641055180975656023_1_2d0a28060853fb4ffb5 88048bb5fb7bf84a7d6f1.jpg

http://cimg4.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/936x961/80-snapchat_5090700353066954602_1_c9d7f82050db4cdd105 d73386546e80c2f5c7aad.jpg

http://cimg5.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1010x1054/80-snapchat_6497589732915445662_1_6c2c9119e09276a2f06 79c927b04787e029bec3e.jpg

http://cimg6.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/966x819/80-snapchat_5017398708770702845_1_1444e57b82f822db5c7 33df7fa256e92c3bdc09b.jpg

[draggin50]

What polish did you use?

[USMCPONY]

A white stick and buffing wheel

[cyah92]

Thats shiny

[2Fast4You]

I need the info to get that polishing kit, Wow that looks fantastic...

[USMCPONY]

Head light restoration kit for a drill. Then a 4 1/2 buffing wheel and a white buffing stick.

[USMCPONY]

I'm doing my intercooler, dewitts radiator, alternator bracket and alternator next.

[draggin50]

Keep up with pictures! If I do it over, everything will be black! I hate polishing so much!

[USMCPONY]

Put in the fore triple pump they said. It'll be fun they said.


http://cimg7.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x1080/80-snapchat_6639819542510961784_1_fdc8664f29fee110236 c5061a41e49dbdcb028f4.jpg


http://cimg0.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x1080/80-snapchat_1377115930035597460_1_f38845bcace0fb7d65e 5ec2fe0f8e1f4b65c4479.jpg

[SN95N/A]

I rode in one of these Tuesday ..really got me thinking..Nice work

Sent from my VS990 using Tapatalk

[Blkcobra01]

Man I love C6's nice work. Never worked on a Vette but they say doing a clutch is a pita. That must be the torque tube in front of the trans?


Sent from my iPhone using Tapatalk

[USMCPONY]

Man I love C6's nice work. Never worked on a Vette but they say doing a clutch is a pita. That must be the torque tube in front of the trans?


Sent from my iPhone using Tapatalk

That is correct

[Rick93coupe]

As awesome as that car is, I don't think I could wrench on it. Everything looks like a nightmare, so hopefully you only have to do it once!

[USMCPONY]

Both tanks are in, cross over pipe is connected, torque tube, transmission, rear end, suspension, and wires are all connected.


http://cimg3.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x1080/80-snapchat_3013711903789700774_1_aba6f6697430aca3f7b bc641a8dbb8403192ddc1.jpg


http://cimg6.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x1080/80-snapchat_3547201928298925640_1_066cc1470d667996426 2ff6499198170aa5d283f.jpg


http://cimg5.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x1080/80-snapchat_4839336140311090567_1_3aba389a45d7f68f275 bf8d14ee80cca4dc1a30f.jpg

[draggin50]

Wont be much longer now will it?

[USMCPONY]

Wont be much longer now will it?

I gotta finish running the fuel lines and a few more things. Biggest thing is finding a way to hook up two vacuum lines. The new intake has three. I need five.

[Royal96]

Put in the fore triple pump they said. It'll be fun they said.


http://cimg7.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x1080/80-snapchat_6639819542510961784_1_fdc8664f29fee110236 c5061a41e49dbdcb028f4.jpg


http://cimg0.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x1080/80-snapchat_1377115930035597460_1_f38845bcace0fb7d65e 5ec2fe0f8e1f4b65c4479.jpg

Geez, that looks like quite the endeavor. I'm starting to feel bad for having a hard time just pulling my transmission in my driveway lol.

I have a huge soft spot for these cars. I'd love to own one one day, but the Ford guy in me (and, well, my wallet) have a hard time justifying it. But I probably will cave some day.

[draggin50]

CJ Pony parts sells this UPR vacuum log. Or just call Sharad up at UPR and he can hook ya up.
http://www.cjponyparts.com/upr-vacuum-tree-block-billet-v8-1986-1993/p/HW2383/?gclid=CLmF_IqqnM0CFZSEaQod0oQNLg

[USMCPONY]

I've looked for something like this. I'm worried about weakening vacuum if I share multiple vacuum lines from one fitting.

[USMCPONY]

I ended up making my own coil relocation kit. The only thing I had to buy is the firecore50 wires. I'll have $145 total invested.

Driver side inner fender

http://cimg1.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x1257/80-snapchat_199108786849805228_1_7d754277448c0b94a21d 65f890fcf45a67d8ea9d.jpg


http://cimg6.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x1267/80-snapchat_7522723292100433091_1_ec231d02132631459bb c3d5652aec4d0b8ef7934.jpg

Passenger inner fender


http://cimg1.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x1233/80-snapchat_6267423142267338622_1_a91f3298d1f8dcc5eeb 6317f7137e79a0f327479.jpg

[04 Venom]

I admire your dedication to this project. I don't have the technical skill, or patience, to do what you're doing.

[USMCPONY]

I don't have the skill either lol. I'm just learning as I go. I appreciate it though.

[USMCPONY]

Picked up some more much needed parts. I picked up the professional model Hp tuner so i can data log. A Mighty Mouse catch can. And a vacuum block.


http://cimg1.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1940x2000/80-20160704_233700_d33941c31b40992eaad2321a3839a3cbe8 eb5085.jpg

http://cimg2.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1653/80-20160704_233759_2fba2ad7b226c4505e8ed8252d4aa82f95 7af696.jpg

Since the corvette has absolutely no room in the engine bay. I had to make room. So i made a bracket for the fuel pressure regulator and the catch can.

Regulator:

http://cimg5.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1942/80-20160704_234129_41979d42a8b9d91a546c28947cbfd82b56 c95321.jpg


http://cimg6.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/80-20160702_062643_98fa6d171086ea86a6f4b264d469ea9a28 8c3e48.jpg


http://cimg7.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/80-20160702_062707_ebae248f1ea3fba03a8d47d7b9c38895ca d134b4.jpg

Catch can:


http://cimg9.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1724/80-20160704_234229_6461890ab9a7682e6b441e5d6092613ca5 20e7fe.jpg


http://cimg1.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/80-20160704_061413_a5ec97e000b63d8e4d18efe9a719bca262 420b7e.jpg


I also finished installing the fuel system and hiding the wires under the intake.


http://cimg5.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/80-20160703_154507_ab8507b4943135cec217b49ed6fd0b4466 d86ea1.jpg


http://cimg9.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/80-20160702_063053_21cd9eae63a1b5edc9ae88ba479a94b82a 861dcc.jpg

[2Fast4You]

Ingenuity at its best, makes it work.

[draggin50]

Looks like its coming along nice! Cant wait to see it out making passes. Gonna be nasty as hell!

[USMCPONY]

I'm just ready for it to be finished

[USMCPONY]

Polished up the radiator and fan cover. I also organized and zip tied all the wires i have hidden underneath the intake.


http://cimg9.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/80-20160706_032003_bb93bf92d78e8542232aee2f1f4db3b503 dd06dd.jpg

http://cimg1.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/80-20160706_041138_bfe54bfbf4ab422a7ce4270778aeafdbe7 ce28fd.jpg

http://cimg2.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/80-20160706_050708_705d5aa33a178c8d93cdcf1442ef3e1a0c 970c23.jpg

[USMCPONY]

She's pretty close to being done. Just a few things I'm waiting on.


http://cimg1.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20160709_143650_85549c97587cbc2dc1e2a25bcce598 1d0c8b0059.jpg

http://cimg5.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1415x1414/80-img_20160709_132009_1a7239fa6c7fed26067fb95fe415de eb6094f1ae.jpg

http://cimg6.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1493/80-20160709_052710_571f0033acc6d63f7b3d8105f29724efcf 9813e3.jpg

[SN95N/A]

On your way to the top of the list lol..looks sharp

Sent from my VS990 using Tapatalk

[USMCPONY]

On your way to the top of the list lol..looks sharp

Sent from my VS990 using Tapatalk

Almost afraid to run it now. Almost....lol

[2Fast4You]

Looks great, looking forward to seeing it out.

[USMCPONY]

Looks great, looking forward to seeing it out.

Appreciate it

[USMCPONY]

If you feel the ground shake tomorrow or a slight tremor. Don't be alarmed. Its not a earth quake. Im just starting the Vette tomorrow.

[Rick93coupe]

It looks amazing, congrats and enjoy!

[2Fast4You]

Let us know how it goes.

[draggin50]

Video!!!! I bet your anxious as hell! Good luck! Hope to see it out soon!

[USMCPONY]

I dont get off until 1am. Am I a terrible neighbor for starting it at 2am lol? I'll close the exhaust and keep the garage door close just to be nice lol.

[draggin50]

Im right there with ya. I get off around midnight. My neighbors are pretty cool and haven't bitched yet!

[USMCPONY]

For those who don't know. I ended up primming the motor. Once the oil pressure rised oil started running from the back of the block. So i spent all last weekend taking everything back out of the car. Inspected everything. I noticed the rear main seal wasn't completely round. It was so small of a difference its nearly impossible to see. I believe its enough to let oil get through. Even though its a brand new seal. I ordered another one and I'll be putting it together this weekend.

[draggin50]

Wow... That sucks! It don't look very easy to tear apart as it is. I feel for ya!

[PKFIRE]

That's strange, did you have a hard time installing it?

[USMCPONY]

Ended up making a alignment tool for the rear main seal. Ended up putting everything back together. Primmed the motor and it started leaking again. After inspecting and inspecting and inspecteing. We found out that after they machined the block. The bolts were only snugging the rear plate. The bolts were bottoming out and snugging the plate that we thought it was tight. Thus allowing oil to escape once oil pressure was reached. So we're gringing all 12 bolts and re-installing everything. Im almost positive that's the only issuse. Fingers crossed



http://cimg5.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/80-20160813_155337_4308741d44590d1ebda5ce0ecf7a2bceec f3d074.jpg

[2Fast4You]

I think I would be giving the engine builder a call, in a hurry...

[USMCPONY]

These are the same bolts that was on it. They don't require much torque and still looked perfect. I decided to reuse them. Oh well, i now know what the problem is and should be fixed soon. When everything is custom I expect problems like this. I don't know anyone else with this setup so im learning as i go.

[draggin50]

Atleast you found it now instead of later.

[USMCPONY]

She's fixed! I grinded all bolts to size and installed the rear main seal, back plate and flywheel. Primmed the motor and no leak! Just have to put the rearend, trans, and torque tube in. That'll wait for the weekend.

[2Fast4You]

Good deal... :bigthumb:bigthumb:bigthumb

[TooFast98Cobra]

Fing cars!

[USMCPONY]

First start up

https://youtu.be/FDSgSBTefsk

[SN95N/A]

Sounds nasty nice work

Sent from my VS990 using Tapatalk

[Gearhead]

First start up

https://youtu.be/FDSgSBTefsk

Nice !!!

[Yellow98Cobra]

Sounds good.

[draggin50]

Damn that sounds nasty! Gonna be a whole different car now I bet.

[cyah92]

That sounds badass

[USMCPONY]

Thanks guys

[USMCPONY]

Just a little update on the car. The car won't come out of reduced power mode. Its throwing a few codes on my scanner and like 50 codes on my hptuner. I was going to have a shop look at it but they're all backed up for 5 weeks. By that time it'll be too cold to enjoy the car. So i decided to spend the rest of this nice weather with my 1 year old son instead of messing with the car. Like I've been doing all summer. I may change a few things but haven't decided yet. The other night while he was sleeping I hand polished my new throttle (I bought a new one since the throttle body was one of the codes). Im having a hard time getting into the tight places. I'll make some improvements.

Possibly future Modifications:

RPM Stage IV differential
Powerglide conversion
Switch to a F1x. Which is the biggest blower that'll fit a c6 (I have the second biggest)
Pro EFI


http://cimg0.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1169/80-80_1473538647354_43a2e7b9f24116a7fb89459d839b4c407 ca21349_96c4ab3d67c788c762df56d4be2456c2bbbf4ef8.j pg

http://cimg2.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20161002_021854_0ced42c8305bc9252e3d55d03f72e8 521928a698.jpg

http://cimg3.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20161002_021808_2b160d1c53280f6e48dbb1553840b0 56741446c0.jpg


http://cimg4.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1600x2000/80-img_20161002_021715_c5dbf68850eaa65f185316e6a214cf f1e22b4685.jpg

[Ackbar00]

Reminder to self. If I ever get a vette, get a positive displacement blower.......

[USMCPONY]

Reminder to self. If I ever get a vette, get a positive displacement blower.......

You'll be limited to about 650hp. Options are even slimmer for PD blowers.

[Ackbar00]

If it allowed me to get my hands in the engine bay? It would be totally worth it.

Besides, a Vette with 600 or 1000 HP; going to run the same at the track ;)

[USMCPONY]

If it allowed me to get my hands in the engine bay? It would be totally worth it.

Besides, a Vette with 600 or 1000 HP; going to run the same at the track ;)

I sure hope you're wrong.

[USMCPONY]

I ordered some custom vents to try out. They fit perfect. Im going to have them painted to match the car. Hopefullykeep the engine temps down.


http://cimg8.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20161008_172840_c7363ddda28ba8f43ee738c1b8b540 afb9e6f401.jpg


http://cimg0.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/80-20161011_034602_90e3e0a65e2b646bc34fe51324e9adb933 c6b10f.jpg


http://cimg3.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20161009_041105_6f6d4c77976af99d02b013e4bd5e08 be2d01f16a.jpg

http://cimg4.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20161011_161854_68ba91042d08625d5831b83cb39621 328950a975.jpg

http://cimg5.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20161011_161916_8954cbb3f7d6d9932dd73e15c1a503 b1bf6f6360.jpg

http://cimg6.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20161011_142952_d3a66f97266580143450065776cf74 772109a272.jpg

[2Fast4You]

They look good, were you having engine temp issues?

[USMCPONY]

It would get to 215 if i got stuck in traffic on a 95 degree day. Just trying to prevent a future issue. I have a few more tricks i can do. Im going to cut the bumper support so its not blocking half the intercooler. Then im going to box it in making it stronger than before. It'll have to wait cause the car goes into tuning the 16th.

[draggin50]

Looks nice! Im sure your ready to get back into it and make some passes! Im sure it will be nasty as hell!

[USMCPONY]

It's been a long wait. Too bad they couldn't get me in before the shootout. Maybe its a good thing. Im either going to break record or break parts.

[draggin50]

If your luck is like mine, it will be parts!

I wish I could've been out more this year. Its been a rough one.

[USMCPONY]

If your luck is like mine, it will be parts!

I wish I could've been out more this year. Its been a rough one.

You need to update your project thread. I haven't heard much about your Cobra this year.

[draggin50]

Man since I bought the house, I haven't had much time or money to do anything else. I haven't done anything to it but change the plugs this year!

[cstreu1026]

Man since I bought the house, I haven't had much time or money to do anything else. I haven't done anything to it but change the plugs this year!

Based on personal experience I wouldn't have it any other way.

[draggin50]

Based on personal experience I wouldn't have it any other way.

Very true!!!

[TooFast98Cobra]

Based on personal experience I wouldn't have it any other way.

X1000000

[USMCPONY]

I ended up taking Unreal and Nino S' advice and cut my bumper support to allow more air to reach the intercooler and radiator. I have 3/16" or 1/4" steel plate at work. Im going to weld it into the open areas. It'll be allot stronger than before.

http://cimg3.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/80-20161015_034240_7aa5f93b62f166655d46c1f1f3165acabe a4dc71.jpg

http://cimg5.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/80-20161015_050352_a2255ad6a4dd1a61395f5906373e3bd2eb 742b77.jpg

Then I put it on the ground and loaded it to get tuned.

http://cimg1.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1639/80-img_20161015_175053_f5305c849ebbc9834556bce475ef3c 9815b7483b.jpg

http://cimg6.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1695/80-img_20161016_204751_8058dbefb1310ed5a1298ee09295a6 89134f1b18.jpg

http://cimg5.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1613/80-img_20161016_182154_587d471ef3794d0e0b2a33c75965c8 d9496dd447.jpg

Bye bye

http://cimg8.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20161016_180620_3fe22f985a3792895f6bc871d3460e 2a51ef9d0a.jpg

[draggin50]

Should make well north of a couple hundred horses Id say!!!

The bumper was huge! Im sure that will help out a lot!

[USMCPONY]

Should make well north of a couple hundred horses Id say!!!

The bumper was huge! Im sure that will help out a lot!

It should flow allot more air through it now. Keep the IAT's down.

[S281SC]

Especially with the front facia and fenders out of the way. It should stay really cool for the summer. If it was my car though i would rather have fenders but knock the boost down a little.


Sent from my iPhone using Tapatalk

[USMCPONY]

Especially with the front facia and fenders out of the way. It should stay really cool for the summer. If it was my car though i would rather have fenders but knock the boost down a little.


Sent from my iPhone using Tapatalk


The front bumper is off so they can put it on the dyno. Made it easier to put on the tow truck too. The carbon splitter for it was $2,000 and I don't want to replace that. Its too low to the ground to chance it. The fenders are off because the ecu, meth injection, coil packs and wires are all hidden in the fender. If there's a wiring issue. Its right out in the open. No reason to pay someone to take the fenders back off and possibly damaging them. They are going back on the car.

[S281SC]

I think my sarcasm was lost in the text.


Sent from my iPhone using Tapatalk

[USMCPONY]

I think my sarcasm was lost in the text.


Sent from my iPhone using Tapatalk

I had a feeling it was. You'd be surprised at some of the things I've heard lol.

[2-Tone]

Is this thing at finish line ? Who's doing the tuning ?

[USMCPONY]

Is this thing at finish line ? Who's doing the tuning ?

Yes. Im assuming Brandon is tuning it. Just waiting for a flex fuel sensor incase i get a bad batch of E85.

[USMCPONY]

I just can't catch a break. Doesn't even have 50-100 miles on it.

http://cimg6.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1120x2000/80-received_1811182759129836_5c378c2b9bee94c0c6ea06cf f7875dea306c66af.jpeg

[2Fast4You]

Is the blade hitting?

[USMCPONY]

Seal is going bad

[draggin50]

That sucks! I know how much trouble you went through just getting it on. I feel for ya!

[IWRBB]

Is it oil fed? Maybe needs a restrictor in the feed line? I know a lot of companies will say not to use them, but they work when the seals are getting blown out by 100 PSI of oil pressure.

[TooFast98Cobra]

Mfing cars! Sorry to see this.

[PKFIRE]

Man! Nothing is ever easy! I'm sorry bud.

[USMCPONY]

The return line is like 4 times bigger than the feed line. You'd think that would be enough but who knows with this thing.

[draggin50]

I think my Ysi had a -4 feed and -10 return.

[PKFIRE]

http://www.svtperformance.com/forums/threads/procharger-seals.679245/

See post four, I'm not sure why it's building too much pressure. I wonder if you can regulate the incoming oil pressure. 50-100 miles??? Was it a faulty blower? I had a balance issue on my new turbo that ruined my bearings and turbo seals in about 1000 miles.

[USMCPONY]

http://www.svtperformance.com/forums/threads/procharger-seals.679245/

See post four, I'm not sure why it's building too much pressure. I wonder if you can regulate the incoming oil pressure. 50-100 miles??? Was it a faulty blower? I had a balance issue on my new turbo that ruined my bearings and turbo seals in about 1000 miles.

That's a awesome idea. I don't think that would work on mine because the ysi isnt self lubricanted like Procharger blowers. Mine gets oil from the engine. Which the my motor has a pcv catch can that relieves crank pressure. So idk. Im just a garage mechanic with limited knowledge. Ive never built anything like this before.

[PKFIRE]

Is the oil drain to engine higher than the oil level?

[USMCPONY]

The oil return is at the very top front of the oil pan.

[Walter]

If it has wheels, tits or a roof it will give you problems....

[TooFast98Cobra]

Wow ! Good quote

[USMCPONY]

Sent the intake and valve covers out to get the map sensor, iat sensor and 10an fittings welded in

http://cimg7.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1120x2000/80-received_1826938937554218_4b6ca98387ac5c50b2d96ac9 7514c86961d0175e.jpeg
http://cimg8.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1120x2000/80-received_1826938917554220_95f860fa8088ef1023ef2c39 8fcadd33c97c73a8.jpeg
http://cimg9.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1120x2000/80-received_1826938914220887_bada43047e75644db4540d65 b7ab9227b9e49290.jpeg
http://cimg0.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1124/80-received_1826938920887553_c1bb003d45c0a820cbf1cb70 c51551af083c49e3.jpeg
http://cimg3.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1124/80-received_1826938900887555_6d40c8c412cfe518c88991e7 8830f7d69223a218.jpeg

[2Fast4You]

Looks good, whatever became of the supercharger seal?

[USMCPONY]

Looks good, whatever became of the supercharger seal?

Brian wants to try it again and see how it does.

[USMCPONY]

I just can't leave anything alone....

https://cimg9.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/80-received_10208972771900096_a91ce776c8651f072bef69f 33a9f92e5f6a9e9af.jpeg

[Walter]

Damn son!

[draggin50]

That is gonna make some power!!!

[2Fast4You]

Interesting!

[USMCPONY]

This is the biggest blower that'll fit my car without going to a gear driven setup. If I want to go bigger im going to have to go turbo.

[Walter]

So when does the turbo kit get here?

[USMCPONY]

Probably will never happen unless I make a kit myself. Car is setup up for a blower. Id have to change my balancer again, flip drive, direct drive, change the alternator bracket and relocate it, then id lose A/C. Not much room in the engine. A blower is the most practical.

[Yellow98Cobra]

I just can't leave anything alone....

https://cimg9.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/80-received_10208972771900096_a91ce776c8651f072bef69f 33a9f92e5f6a9e9af.jpeg

God lord, thing is going to fly!

[USMCPONY]

God lord, thing is going to fly!

We'll see! Lol. Ive never built anything like this. Im selling my blower kit btw. Your Z06 would love it!

[Yellow98Cobra]

Ha, not at this time.

[USMCPONY]

Ha, not at this time.


Well shoot. Let me know when you want to go fast lol

[Walter]

Well shoot. Let me know when you want to go fast lol

We have all been waiting 2 years to watch you go fast!

[USMCPONY]

We have all been waiting 2 years to watch you go fast!

We'll you're going to keep waiting. Im one of the slow guys. :lol:

[Kwik92GT]

Im one of the slow guys. :lol:

:rolleyes:

[draggin50]

We'll you're going to keep waiting. Im one of the slow guys. :lol:

10.40's @155!!!! I know you had some crazy mph when it was out last time.

[USMCPONY]

Im just trying to keep up with you fast guys.

[2Fast4You]

That makes the two of us.

[draggin50]

Im just trying to keep up with you fast guys.

You are one of the fast guys! Im to slow to keep up with you guys!

[USMCPONY]

You are one of the fast guys! Im to slow to keep up with you guys!

What's your best ET? Exactly! Lol

[draggin50]

What's your best ET? Exactly! Lol

Well ET was maybe a little quicker than that but your new combo is going to be wicked. We'll see. Hopefully you have it out soon.

[USMCPONY]

Well ET was maybe a little quicker than that but your new combo is going to be wicked. We'll see. Hopefully you have it out soon.

You and me both. I just need to sell my current kit.

[Walter]

You guys and all your fancy boost....

[draggin50]

You guys and all your fancy boost....

^^^ Faster than me without boost!! Or will be!

[USMCPONY]

Size comparison of the F1X compared to the 2200R/YSI. I couldn't capture the difference in pictures but the F1X looks so much bigger in person compared to the 2200r.

https://cimg5.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20170304_064504_61ea830080133253b6f6ff362b39ff f44e5fec62.jpg

https://cimg6.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1786/80-img_20170304_064003_4612e136a0fa41a14240eee3d013dc 8ba201d8f1.jpg
https://cimg9.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1667/80-img_20170304_063635_64b3bf3f3a5a1fa95011b45b57691e 472da1761e.jpg
https://cimg0.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20170304_063833_a9f53e868dd06a6535a8a94af687e1 954608ebb4.jpg
https://cimg2.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20170304_064232_91d18023a86c078a4af070ddd561d6 623ee6d052.jpg

https://cimg1.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1563/80-img_20170304_064348_895d09a85dd1cb21a88f4282c7ac22 a8831aae6b.jpg

[draggin50]

You can see the difference in them. That's gonna make some power!

[Walter]

When is this beast gonna make some noise?

[USMCPONY]

I was driving it last weekend. Going in the chassis shop in two weeks for 6" thick intercooler, 4" inlet and outlet and tubular bumper support.

[USMCPONY]

Little man has been wanting to go for a ride. I took him for his first ride last weekend.

https://cimg5.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20170226_165844_969cad8e87e1230f07f94e98b54a80 7bd731183a.jpg

[2Fast4You]

Hold on to your lug nuts! Lol

[USMCPONY]

Still a couple weeks away before the chassis shop can work on my car so I decided to polish my blower.

https://cimg1.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/80-20170307_063604_b8095390d1a0c73bf9474788f61c261b0c 94fbce.jpg

https://cimg9.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20170309_144731_5b08889b3180ab10e553fdc910b67a 86838f32fb.jpg
https://cimg0.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20170308_054859_25513cebb50919678fa1ea14f87e1c 2d4131c273.jpg

I also ordered a Dallas Performance f1x 10 rib billet bracket and their 4.5" big mouth filter. I'll need a 2" cut down radiator for it to fit. Only problem is I don't want to spend $1,000 on a new radiator and fan setup. While I'm waiting for my parts to arrive. I decided to lower my radiator myself. I took out the radiator support. Cut off the brackets and lowered them approximately 1 1/4" down and 3/8" forward. I also have ECS radiator support 1" spacers. I also trimmed the rubber bushings 5/16". After finishing I can't believe how much it lowered the radiator.

Before cutting off brackets
https://cimg3.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/386x290/80-20170310_060137_149de8283fc41966b1443b698e04b9d1ec 70852b.jpg
https://cimg4.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/331x331/80-20170310_060226_5698a32032e2139d3fa4d440f2f305d062 8e1b29.jpg



After:
https://cimg6.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-20170310_054113_df92dc365befa72107e66f7e1d8edf9111 55c003.jpg
After I took this picture I grinded the bushing down to make it level.

https://cimg1.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-20170310_054512_2f4752bafbca3f02e9d4548998ba8f65cb 3b07ae.jpg


With more adjusting I believe I can drop it down another 1/2".

https://cimg9.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/80-20170310_053216_16d3c9d25e8336de7cd9fc5b7aa563c5b8 8f14e0.jpg

You can see where the top bracket use to be. Im definitely at least 2 1/2" lower.

https://cimg5.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-20170310_053336_3575ff77ef45441bda2fc54f1a15f4a611 095d09.jpg

[draggin50]

Looks like you made plenty of room for it. I was wondering if you was going back to a 10 rib set up. Almost have too to prevent belt slip.

[USMCPONY]

Looks like you made plenty of room for it. I was wondering if you was going back to a 10 rib set up. Almost have too to prevent belt slip.

My balancer is a 10 rib so im stuck with it. Next option is a 12 rib or cog.

[draggin50]

The stock 8 rib looks thin compared to the 10 rib on the old blower.

[USMCPONY]

The stock 8 rib looks thin compared to the 10 rib on the old blower.

It really does. I couldn't imagine what a 12 rib looks like.

[draggin50]

Probably pretty tight on real estate under there aren't ya?

[USMCPONY]

My 10 rib balancer is 1/8" away from my steering rack. I don't know how they get a 12 rib to fit.

[USMCPONY]

ve been waiting 3 weeks for my supercharger bracket. It was suppose to be delivered today. I came into work today even though I could of had the day off just to get the bracket. Open the box and half of it is missing. This is probably the 10th time this has happened. From different vendors. Its going to be over a month before I get to mount my head unit.

[USMCPONY]

She's here. Dallas performance f1x bracket. Definitely worth the wait.

https://cimg9.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20170328_185925_8ace78e288fcce3b76894ff5c5f36b dc125fe96f.jpg
https://cimg0.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20170328_185759_d9975d67dc365f3981b19dd8cdf09b 0092d80919.jpg

[Rick93coupe]

Damn, that's purdy!

[draggin50]

That's nice!!!

[Walter]

Atta boy!

[USMCPONY]

It's a tight fit but the F1X is on. All I have to do is plus the hole in the oil pan where the drain plug use to be. Then waiting for the chassis shop.

https://cimg7.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20170403_142116_4a46e9f277cd2249804ad37d8f14e5 8f6cc253e5.jpg
https://cimg0.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20170403_175528_2523952fb071ea7dbe298131b924c4 1281b80bc6.jpg

[draggin50]

Looks bad ass! And it looks like its a pain in the ass to work on! Everything is packed in.

[k062693w]

A place for everything and everything in it's place ...


Looks Good ...

[USMCPONY]

Looks bad ass! And it looks like its a pain in the ass to work on! Everything is packed in.


Everything takes 5 times longer than any Mustang ive ever worked on.

[Walter]

Thats always what i heard, them vettes are tough to work on. Ill deal with going slow, but keep my sanity and money LOL.

[USMCPONY]

Thats always what i heard, them vettes are tough to work on. Ill deal with going slow, but keep my sanity and money LOL.

You'd be doing yourself a favor. I look like a Emo kid with all the cuts on my arms.

[USMCPONY]

I'm still waiting for the chassis shop to free up but I finally got the plate I wanted. After being denied I had to come up with clever idea.

BMV: "Sir, does this have anything to do with racing?"

Me: "No ma'am, I'm a insurance agent. I sell gap insurance!"

Me: "ok good. Please put that in the description and sign here please".

https://cimg6.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1080x1080/80-20170413_193014_f8820484f0575dc802a30701a803c5116b 992351.jpg

[Walter]

Hahahaha

[draggin50]

Good one!

[04 Venom]

Everything takes 5 times longer than any Mustang ive ever worked on.

I admire your tenacity on this build. Way beyond my capabilities.

[USMCPONY]

I admire your tenacity on this build. Way beyond my capabilities.

Appreciate it bud

- - - Updated - - -

Still waiting on the chassis shop. Only thing I've managed to get done is install the license plate. Oh, I also found my 02 sensor connector was completely melted. I also got Prochargers new big boy BOV. https://cimg3.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20170423_200700_2364e2054bd39baeccc9e7c746d993 0c43587669.jpg
https://cimg5.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20170426_155232_1d4fb2452bc285569a33f43d38d33e 984e89fe9e.jpg

[draggin50]

Gonna be bad ass!!!

[SN95N/A]

Big freaking bov lol

[USMCPONY]

Its designed to be used on the 3500hp F3 Procharged cars.

[Walter]

Where u even gonna have room for that BOV?

[USMCPONY]

I had to remove the engine to fit the BOV

[Walter]

I had to remove the engine to fit the BOV

LOL, prolly have to pull the trans out along with the dash.

[USMCPONY]

After 10 long weeks she's finally going to the chassis shop. Feels good to finally get the ball rolling.

https://cimg4.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1179x1180/80-img_20170522_193137_2dd41f0cdf685d626ee99cab768665 613e2e7777.jpg
https://cimg5.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1346x1346/80-img_20170522_193116_16d951c07f90bfa0a66fa8053230ac abf76e34cd.jpg
https://cimg6.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20170522_192934_4a3670052acf80cdd52ee8e7f7f7d5 ae385a1345.jpg]

[PKFIRE]

Haha! Just read your license plate post!

[Rick93coupe]

I can't wait to see this thing run!

[2-Tone]

I can't wait to see this thing run!

X2. It's going to be a monster !

[USMCPONY]

I just want to drive the stupid thing lol

[USMCPONY]

Just a small update. My dewitts radiator wouldn't work so we have to go with something custom. Went with a dual-core that'll be 6" thick and 60% larger than my dewitts. I also went with a single 3700 cfm fan, 4" intercooler piping, 5" intake pipe and 5" filter. https://cimg9.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1152x1169/80-img_20170913_101810_162_d7b34526b0d8aa30eaec1028c0 dbf47372f91c6b.jpg
https://cimg1.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1124/80-img_20170913_103042_838_5b8f3f88b1ee7be6e8aeef51ca 010f11fdb15098.jpg

[draggin50]

Where the hell you gonna put that monster? That's thick!!

I was about to ask how the car was coming along.

[USMCPONY]

The intercooler sits much further inside the front bumper. There's a little bit more room. The radiator is a little sorter in length. It should fit offset towards the drivers side.

[draggin50]

Ok, that helps out. I know you are short on space and that thing looks huge!

[USMCPONY]

We cut like 6-8" of the bumper and slid the intercooler all the way up to the grill.

[USMCPONY]

A couple more update pictures.

https://cimg8.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1124/80-img_20170928_181202_417_b9ab061f1763236e2a01c5bf2d 9125f04401eb40.jpg
https://cimg0.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1124/80-img_20170928_180929_850_2a8f3cd0cdd5ab7218f9708a9d 9a138f08b96ccc.jpg
https://cimg1.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1124/80-img_20170928_181115_433_c329f16ecf9c953b3c6a4a6c01 ebd8492cb13bcf.jpg

[draggin50]

Man that's a monster!!!

[USMCPONY]

That's what she said..... then she stole my energy drink.

[USMCPONY]

I haven't really been updating this. I figured I would give the one or two people following this build some updates. The car is finished. Just waiting on the snow to melt and the salt to wash away before I take it to get tuned.

https://cimg6.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20180116_072953_645_76cc8b409729c925790f83ef4c b76181880e3aac.jpg
https://cimg6.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20180116_073031_148_df9dcd4fbd6f30afdbd7e6a661 369a303881b748.jpg
https://cimg4.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/469x469/80-img_20180116_072859_100_dad5b498cc90ef22514eb39899 46f89d0a465aed.jpg
https://cimg6.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/80-20180105_162305_10510e6bf2112c559242f602afdcd06cc9 0903a5.jpg
https://cimg9.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1600x2000/80-img_20180116_073232_709_2dc2cedfa8a2fcaaa4702731b8 0ad1f50dc1f0f2.jpg
https://cimg5.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1504/80-img_20180116_073523_831_e5cfbaffaf0afb253bd6277ae3 74bf122746379d.jpg
https://cimg7.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20180116_073409_333_dded1a934016e1e705e144d396 8e4448ad284303.jpg
https://cimg1.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20180112_070659_754_52c7d528fd90608e167ca816c8 88ec490d2665aa.jpg
https://cimg2.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1923/80-img_20180112_100446_409_8807fd943f13e242332682d212 ed2c23da29f986.jpg

[draggin50]

Looks nasty!! I think there is more than a couple watching the build even though its not a Ford!

Who did all your piping? Turned out nice!

[04 Venom]

I have to ask. After all the effort and expense you have expended, would you do it again?

[TooFast98Cobra]

Nice job!

[USMCPONY]

Rob at Rogue Race Cars did the fab work. I'm not sure if I can answer that. If my car runs what I want it to. Then yes. But I'm at the point that if I break something major. I'm screwed. I went way to far with it financially. It was nearly a $80,000 car to begin with. There's no transmission that'll hold that much power except a 2 speed powerglide. And that's a $30,000 conversion with it being a trans axle. At the same time. There's probably only 5 other 1500+hp streetable Corvettes in the work. If all else fails I guess I could turn it into a show car lol.

[k062693w]

Looks nasty!! I think there is more than a couple watching the build even though its not a Ford!

Who did all your piping? Turned out nice!

Exactly ...

[draggin50]

Should've guessed Rob! He does some real good work!

[2Fast4You]

Rob does fantastic work!!!

[slow86fiveoh]

Rob does good work but there is a blue mini tubbed coupe that has been there for 2 yearss for a cage yet there have been countless other jobs completed after it's arrival.

[Rick93coupe]

I've been waiting to see what was going on with this. The build is ridiculous, in a good way, lol. What's up with the honey comb in the charge pipe, I've never seen that before?

[2-Tone]

Simply Awesome. Who will be tuning ?

[USMCPONY]

It's a air straightener. It's put right in front of the mass air so you get a more accurate reading. Works good with methanol injection too. Brian at finish line performance is tuning it.

[USMCPONY]

Rob does good work but there is a blue mini tubbed coupe that has been there for 2 yearss for a cage yet there have been countless other jobs completed after it's arrival.

I'm not sure of the story behind that one.

[draggin50]

Saw more pictures of it today on FB. Lookin nasty!!!! Really cant wait to see how this turns out.

[2-Tone]

I call dibs for the first race once when it's done. Roll, dig, Or track. No stips. We can run for fun or a few bucks. Whatever you prefer.

[USMCPONY]

I call dibs for the first race once when it's done. Roll, dig, Or track. No stips. We can run for fun or a few bucks. Whatever you prefer.

That's a deal

- - - Updated - - -

I forgot to mention. I got these too.


https://cimg6.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20171122_163625_740_f26a5a3b5b5f3951393731846b 517df06a2c067b.jpg

[2-Tone]

Looking forward to it. :bigthumb

[draggin50]

Man those wheels are gonna look good on there! Whole different car for sure!

[USMCPONY]

Here's a preview lol :lol::lol:

https://cimg4.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1509x1080/80-img_20180123_205648_506_9c7ceb37a5502bf2a89da7d203 4180489ffab2aa.jpg

[2-Tone]

[QUOTE=USMCPONY;817428]Here's a preview lol :lol::lol:

Ok I get it. You're showing me that now because I'm never going to see it when we race. Thanks !

[USMCPONY]

I figured I'd give you a close up cause it's going to be much farther away come race day haha

[USMCPONY]

She's coming home tomorrow

https://cimg8.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/943x640/80-img_20180121_180208_545_fed291a86ca2978f3f5f45f74f 828686b439093c.jpg

[Yellow98Cobra]

She's coming home tomorrow

https://cimg8.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/943x640/80-img_20180121_180208_545_fed291a86ca2978f3f5f45f74f 828686b439093c.jpg

Looks wicked! Should roll out pretty well.Where is the diaper?

[USMCPONY]

In my garage. I'm not putting it on till I'm sure there's no leaks. We are talking about me who put the motor together. I'm surprised it started lol.

[draggin50]

I want to see it with the new wheels on!

[USMCPONY]

I just pulled her in the garage. She's finally home.

[draggin50]

Bet that put a smile on your face, having it back home and all.

[2Fast4You]

I'm looking forward to seeing this...

[USMCPONY]

Snapped a couple pics after I got her home.

https://cimg3.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/1074x1057/80-screenshot_20180127_172509_c17540d258a1bec0a283dd5 a58d085230545f93d.jpg
https://cimg4.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x1667/80-img_20180127_171254_154_b46d23547492a9bd5eed5b3402 8f3bd94d6e1bbe.jpg
https://cimg7.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20180127_171326_080_ca6e31d9a8931c1328f2c25d9c 151f03fc871328.jpg
https://cimg0.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20180127_171212_160_5b5fea728275de096fb8a83f88 f4a76443950adc.jpg
https://cimg2.ibsrv.net/gimg/www.corvetteforum.com-vbulletin/2000x2000/80-img_20180127_130409_051_7d3a214bdd297a1e1bb0798006 6203b9c9fd1a0e.jpg