Lots of pics of powder coating I've done lately

[mustangboy]

What all colors do you offer in the ceramic coating

I can get satin and gloss black, blue, white, aluminum, cast alum, red and orange. The orange and red do require a clear so the price would be a bit higher. I also can also get the chrome and make it somewhat shiny however I don't currently have the buffing equipment to get the brilliant shine that is possible.

[MFIELD]

What color is that in the pic you posted?

[mustangboy]

It is a satin black and it is a ceramic specifically desinged for turbos.

[aperacer]

on the harley color. how do you think it would look if it had clear on it..and my thinking is the cam covers and blower of the cobra.

[mustangboy]

on the harley color. how do you think it would look if it had clear on it..and my thinking is the cam covers and blower of the cobra

Were you thinking a shiny clear or low gloss clear? I can try it both ways just to see how it would turn out. I won't be able to do it this weekend but sometime early next week I'll shoot a couple sample panels to see how it looks. BTW did you ever get that stuff at the firehouse ready.

[aperacer]

Were you thinking a shiny clear or low gloss clear? I can try it both ways just to see how it would turn out. I won't be able to do it this weekend but sometime early next week I'll shoot a couple sample panels to see how it looks. BTW did you ever get that stuff at the firehouse ready.

how about both clears. and no my lazy ass has not finished drilling and tapping the blocks.. i am going to try to finish this weekend..

[boostanggt]

Well here is my first try at ceramic. Now keep in mind these headers were quite crusty hence they are pitted pretty bad so they don't look really smooth. On a smooth surface the finish would look much better. So if anyone wants ceramic done on their exhaust or turbo setup let me know I'm finally up and running with it.

These headers were a MILLION times worse than now. I really wish I would have taken a before picture. They turned out great kenny

[ADaughen]

Have you ever thought of doing dura-coat or gun-kote for shotgun barrels? I need my mossy 500 cleaned up and resprayed. I don't have an oven big enough for 24" barrel.

[mustangboy]

Here are some current jobs. Some v/c's and intercooler piping for an Audi S4 and some Harley parts. The Audi parts are Carbid blk on the piping and SD Fire Engine red on the v/c's and the Harley parts are mirror blk.

Before





After



Harley parts

[MrsAPE]

You should get a set for the table in the dining room.That would be awesome.

You do have to let know if you get them so I can run down and look at them again.LOL.

Look?! You mean print them again?!?!?!

[dsmawd350]

After

what kind of blacks do you have that would resemble this on a set of sheetmetal VC's. I want a satin/ textured black nothing too glossy and shiny

[mustangboy]

That color is carbide black and would just like it does on the tubing on the v/c's. Go back to post #555 and you can see what it looks like on a factory valve cover. I have plenty of that color here if you want your covers done.

[facemelter71]

Kenny,can you get me a price for my friend here at work.Its for his 91 BMW 318is.It is his Upper and lower intake.
The yellow thing in the pic is a tennis ball for reference.

[Buckeye]

are those harley parts like a black crome? ever used this on a intake or march pullies?

[mustangboy]

are those harley parts like a black crome? ever used this on a intake or march pullies?

Actually those Harley parts are mirror black which is just a gloss black. Here is the same color on an intake.

[Buckeye]

hmmm... that last harley part look totaly differant

[mustangboy]

I think it looks different because the sun was directly overhead so it kinda made the pics look a little washed out.

[ADaughen]

Kenny does good work. I just exchanged some 5.0 valve covers in wrinkle black.

I almost didn't and was just going to leave the grimy ones on there since it kinda looked like wrinkle black.

Photos don't do his work justice. Now I have to clean up the rest of the top end...


Kenny, let me know when the other parts are done. I can be back down Tues/Weds or after 4pm on Sat/Sun.

Make sure you take before/after for the rest of the guys.


Also, what is the standard price on an aluminum colored upper/lower stock intake? Upper is clean, lower is grimy like the valve covers.

[mustangboy]

Here is my latest batch of ceramic.

[5.0calypso93lx]

Can't wait!