Page 3 of 3 FirstFirst 123
Results 41 to 58 of 58

Thread: On 3 Performance turbo kits

  1. #41
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Sounds good. Im sure it would be on a car to car basis due to what all is done to it already. My car already has the k member and fuel system so thats something I wouldnt need.

  2. #42
    Join Date
    Oct 2007
    Location
    columbus oh
    Posts
    319
    Quote Originally Posted by draggin50 View Post
    Sounds good. Im sure it would be on a car to car basis due to what all is done to it already. My car already has the k member and fuel system so thats something I wouldnt need.
    thats what im saying..every car is different, but most of it i have down to a science unless i have a customer that doesnt know what he has. but the 5.0 kits, dont need to have a k member setup, like the mod cars have to, thats why i would still want to offer it as a option. and when using say a upr kit with the on 3 kit, have have to order the hellions k member in order for the control arm cross brace to be lower and clear on3's kit too..lol

    but also have to know the limits of what your working with aswell, and high mileage car, can go bad on the dyno rather faster when pushing it past the limits. like the cobra the on3 guys blew up...i knew over 500 at the wheels it was going to go to shit. out at the track, bang goes a rod thru a teksid block..lol but the 2v cars...keep them under 450 at the wheels. and so on..

  3. #43
    Join Date
    Feb 2004
    Location
    Springboro, OH
    Posts
    6,298
    Quote Originally Posted by HawksWR37 View Post
    About how much would dp charge to install this kit or could i handle it in my garage?
    What year is your car? Anything can be done in your garage, my business was started out of the garage behind my house. It was really well equipped, but still on my back and using floor jacks. Now I have 4 lifts and a dyno, so it makes it a lot easier to do stuff. Tell me the year and I can get you an installed/tuned price.
    We have a loading dynojet dyno in house and use sct chips and programmers.

  4. #44
    Join Date
    Mar 2009
    Location
    Marysville OH
    Posts
    388
    Finally got my on3 kit this past weekend looks like its pretty straight forward. I would say if you are a little mechanicly inclined and have tools you could do it. Hell it even comes with instructions.Can't wait to get my garage built so I can start working on the pile. Anyone have any 42s and a blow through meter they wanna get rid of?

  5. #45
    Join Date
    Oct 2007
    Location
    columbus oh
    Posts
    319
    Quote Originally Posted by blown86lx View Post
    Finally got my on3 kit this past weekend looks like its pretty straight forward. I would say if you are a little mechanicly inclined and have tools you could do it. Hell it even comes with instructions.Can't wait to get my garage built so I can start working on the pile. Anyone have any 42s and a blow through meter they wanna get rid of?
    should have just ordered that stuff thru on 3. hard to beat the pricing on the new maf and injectors he has

  6. #46
    Join Date
    Mar 2009
    Location
    Marysville OH
    Posts
    388
    I didnt even check with him guess I should have maybe he would have cut me a deal with the kit. He already cut me a pretty sweet deal so I dont have the heart to ask him for another
    Nitrous is like a Hooker you wanna hit it but your afraid of the consequences

  7. #47
    Join Date
    Oct 2007
    Location
    columbus oh
    Posts
    319
    Quote Originally Posted by blown86lx View Post
    I didnt even check with him guess I should have maybe he would have cut me a deal with the kit. He already cut me a pretty sweet deal so I dont have the heart to ask him for another
    injectors are 300, maf is 200...

  8. #48
    Join Date
    Nov 2004
    Posts
    5,643
    just build one your self i did mine for $1,200 heres how it worked stock shortblock http://video.google.com/videoplay?do...41&hl=en&emb=1 i also build kit's lmk
    Plan b is to finish plan a

  9. #49
    Join Date
    Jun 2006
    Location
    Old Hilliard
    Posts
    1,955
    Quote Originally Posted by draggin50 View Post
    Ok as I hijacked a thread based on questioning the turbo kits sold by On 3 Performance has anyone run these and what are their stories? I am actually thinkin of picking up a kit in the next week or so. Based on their website a stock Explorer motor with 65 mm tb and B cam made 488 hp and 666 lbft torque! Any feedback is greatly appreciatted.
    there kits produce outragous numbers. they have a few different options for the turbo spec. i was there when that dyno pull was made at dynotune motorsports. shocked the hell out of all of us. and i lost 20 bucks on the bet!

    chad a good guy to deal with. look on youtube under on3performance and you will find some videos of cars his has used as mock ups to make the kits and customer cars. great kits. well worth the money.
    Ryan Grove

    07 Jetta Wolfsburg edition 2.5
    04 Explorer xlt

    Wtb fox coupe or hatch roller for ls swap.

    " if one more bolt breaks I'm going to start welding parts on "

  10. #50
    Join Date
    Sep 2008
    Location
    Mason
    Posts
    3,060
    im still debating these kits, i havent heard any bad things about them, but i want something i can bolt on, get a tune and be done with it.
    Bottle Fed

  11. #51
    Join Date
    Oct 2007
    Location
    columbus oh
    Posts
    319
    Quote Originally Posted by Kevin1989 View Post
    im still debating these kits, i havent heard any bad things about them, but i want something i can bolt on, get a tune and be done with it.
    there are a few thing needed to finish a complete kit...like the maf flange needs welded on and so on..but thats about it. other wise it bolts right on, change injectors, and the pump and go. but i for sure recommend stud and good head gaskets before going over 8-10 psi...the torque curve of these kits are crazy.

  12. #52
    Join Date
    Sep 2008
    Location
    Mason
    Posts
    3,060
    Quote Originally Posted by Gearhead559 View Post
    there are a few thing needed to finish a complete kit...like the maf flange needs welded on and so on..but thats about it. other wise it bolts right on, change injectors, and the pump and go. but i for sure recommend stud and good head gaskets before going over 8-10 psi...the torque curve of these kits are crazy.
    do you work with them alot? because i have lots of questions and shit about them before i think i about buying
    Bottle Fed

  13. #53
    Join Date
    Mar 2009
    Location
    Marysville OH
    Posts
    388
    Got a set of 42's from Paul was just wondering if anyone had a blow through MAF the wanna part with that would work with 42's?
    Nitrous is like a Hooker you wanna hit it but your afraid of the consequences

  14. #54
    Join Date
    Feb 2004
    Location
    Springboro, OH
    Posts
    6,298
    Last time I checked, we had a protube for 42's at the shop. I would have to check with them today for ya.

  15. #55
    Join Date
    Mar 2004
    Location
    Franklin Ohio
    Posts
    1,328
    I have a on-3 kit on my 2002 Stang. Pretty good kit for the money. I wish they used a different style coupler other than v-band. The v-bands are junk in my opinion. I am looking to change it eventually for easier assembly and disassembly without having sealing problems.

    But yes they are decent kits for the money.

  16. #56
    Join Date
    Mar 2009
    Location
    Marysville OH
    Posts
    388
    Quote Originally Posted by NXcoupe View Post
    Last time I checked, we had a protube for 42's at the shop. I would have to check with them today for ya.
    Alright if you do Pm me a price. Thanks for the help!
    Nitrous is like a Hooker you wanna hit it but your afraid of the consequences

  17. #57
    Join Date
    Oct 2007
    Location
    columbus oh
    Posts
    319
    Quote Originally Posted by Kevin1989 View Post
    do you work with them alot? because i have lots of questions and shit about them before i think i about buying
    yes i do... i did most of the fab work for the sn95 kits coming out, and helped with some of the stuff for the updated 5.0 kits..the only kit i dont know much about is the new 3v kits that are out. and currently going to be reworking the mod motor kits. and also i'll be starting on the ls1 f body kits here shortly

    hell on 3 sells all the components you need to finish the kit off, for a 5.0 car.

  18. #58
    Join Date
    Jun 2009
    Location
    New Lebanon, OH
    Posts
    361
    Quote Originally Posted by NXcoupe View Post
    What year is your car? Anything can be done in your garage, my business was started out of the garage behind my house. It was really well equipped, but still on my back and using floor jacks. Now I have 4 lifts and a dyno, so it makes it a lot easier to do stuff. Tell me the year and I can get you an installed/tuned price.
    We have a loading dynojet dyno in house and use sct chips and programmers.
    Sorry, i havent been on here in a bit but i have an 04 GT i ended tearing into it myself but i do need a quote for tuning.


    Quote Originally Posted by Aweasel View Post
    Kudos to the guy who makes a street monster with the least money invested, knowledge and motivation are a powerful tool...bleh to the guy who rolls in to the speed shop, swipes his credit card based on what the expert says and rolls out bragging about his numbers.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •