91 Mini Tubbed Mustang Coupe

[dsmawd350]

Nice work on the roll cage, have you already tied the sub-frame together?

Does Rob do any aluminum interior work? I need a bulkhead to seal off the trunk area in my LX Hatchback.

you mean like this .... robs work also

[2Fast4You]

Rob does great work. That is a full tub by the way...

I thought Craig told me it was a mini tub.

Nice work on the roll cage, have you already tied the sub-frame together?

Yes

Does Rob do any aluminum interior work? I need a bulkhead to seal off the trunk area in my LX Hatchback.

I do believe he does.

[cyah92]

Looks good eirher way

[cyah92]

Looks good either way

[Maximus]

I thought Craig told me it was a mini tub.



I do believe he does.

Define mini-tub...This Coupe has rear control arms in the stock location on the body and modified rear frame rails. The rear tubs were modified to retain the back seat. A FULL tub would be aftermarket rear suspension with aftermarket frame rails, no back seat etc etc

[draggin50]

What all was done to the rear frame rails? Are they just notched? Either way it looks mean as hell!

[2Fast4You]

Define mini-tub...This Coupe has rear control arms in the stock location on the body and modified rear frame rails. The rear tubs were modified to retain the back seat. A FULL tub would be aftermarket rear suspension with aftermarket frame rails, no back seat etc etc

Thanks Craig for helping me out w/ that. I did not believe that it was a full tub myself but I guess it depends on who wants to think what.

[Maximus]

What all was done to the rear frame rails? Are they just notched? Either way it looks mean as hell!

Where the rails bend up and start towards the rear, Rob removed that section and made new rails to support the one off Alum fuel tank.

[cyah92]

Nice picks u got there

[Stang88]

Looks Shweet!!

[heyitsmepugsley]

this is going to be one badass ride!

[2Fast4You]

Thanks guys, I really am going to do my best with this car.

[2Fast4You]

Here is another photo of the front roll cage dropped down the pillar through the dash.

[331lx]

Very nice build u got going on. Everything looks top notch.

[TooFast98Cobra]

Lookin good!

[2Fast4You]

Thanks guys...

[2Fast4You]

Here are a few extra photos of the roll cage being hidden up to the front frame rails. This is to keep it nice and neat under the hood.

[2Fast4You]

More photos to come of the roll cage and the anti-roll bar.

[chris91]

Almost a shame those welds are hidden like that. Its a work of art!!

[orangedemon331]

It's going to be bad ass when you get it back from Rob!!!!