Turbo fox dyno poll

[Maximus]

Im gonna go with 60s, a pro m blow through meter and an accufab fpr. DirtyDogs gonna do a converter for me then its going back for better #s

We have had good luck with the SCT meters.

[blown96cobra]

What gears are you running

3.27, auburn posi unit.

[blown96cobra]

We have had good luck with the SCT meters.

Ive heard mixed reviews on those....mike told me to steer clear of them but steve has one on his 04mystichrome and it works great?

[90fastgt]

I have the sct3000 meter an have had good luck with it so far I am debating between the 355 an 327 my car is a five speed though of course I really think your car is goin to run when the kinks get worked out

[Adam@S&MMotorsports]

We have had good luck with the SCT meters.

X2

[blown96cobra]

I have the sct3000 meter an have had good luck with it so far I am debating between the 355 an 327 my car is a five speed though of course I really think your car is goin to run when the kinks get worked out

355 is what i had in my blk 92gt with a 70mm turbo/302 5spd. 1st gear was pretty useless with 275/60/15 et street radials so you may wanna consider a 3.27

[blown96cobra]

I have the sct3000 meter an have had good luck with it so far I am debating between the 355 an 327 my car is a five speed though of course I really think your car is goin to run when the kinks get worked out

Mike said the duty cycle was nearing 100% on the 42lb inj. so its making over 500hp the trans and converter are just eating it up.

[Maximus]

I was running 3:55 in both my Turbo Stangs. One had a C4, the other had a PG.

[blown96cobra]

X2

do you stock those things ? could u shoot me a price on the one id need?

[700hp04mystic]

Mike said the duty cycle was nearing 100% on the 42lb inj. so its making over 500hp the trans and converter are just eating it up.

that wouldnt your necessarily mean your at 500 wheel would it?

[NXcoupe]

that wouldnt your necessarily mean your at 500 wheel would it?

Well, they will support close to that hp amount and they are pegged by the datalogger. I don't think it's far off.

[blown96cobra]

Well, they will support close to that hp amount and they are pegged by the datalogger. I don't think it's far off.

Im thinking 60s and done!

[700hp04mystic]

OH OK I HAVE A SET OF 60 FOR YA I THINK IM GETTING SOME PARTS TODAY. IF U WU ME THE MONEY IL GET THEM TO YA. HAHAHAHA BUT I REALY AM GETTING SOME.

[blown96cobra]

OH OK I HAVE A SET OF 60 FOR YA I THINK IM GETTING SOME PARTS TODAY. IF U WU ME THE MONEY IL GET THEM TO YA. HAHAHAHA BUT I REALY AM GETTING SOME.

how about i just give you my 42s for em?

[331lx]

I have 60s and a 340 pump I should be covered there I hope to have mine tuned in about a month. My On3 kit has the slot for the meter I used my sct sensor there I hear there about the best.

[331lx]

Blown when are you expecting to have this beast back on dyno with all the bugs worked out

[blown96cobra]

within a month if all goes well

[blown96cobra]

I have 60s and a 340 pump I should be covered there I hope to have mine tuned in about a month. My On3 kit has the slot for the meter I used my sct sensor there I hear there about the best.

You could run e85 if you wanted to.

[blown96cobra]

I Would like to get this out before anyone says anything. The fact that this car did not make 500whp has absolutely zero to do with who tuned it. I took a mess of a car with alot of unknown problems and dropped it in mikes lap. He did a extremely good job unscrewing the mess and making the car right. The issues that its having now are strictly from the tq converter and a non boost referenced fuel pressure regulator, its nothing that Mike or anyone has done wrong.

[331lx]

You could run e85 if you wanted to.

E85 is currently in tank lol.