I would've much rather came down and helped you out this past week instead of what I got dealt that's for sure! Im getting pretty good at plumbing and septic work lately!!
Registered User
I would've much rather came down and helped you out this past week instead of what I got dealt that's for sure! Im getting pretty good at plumbing and septic work lately!!
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Starting all over, Again!
I did read something about that, definetly a tough break.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Starting all over, Again!
Took the fuel lines back out last night from the frame rails. I then installed automotive edge trimming to insure I shouldn't have any issues with abrasive wear or cutting the fuel line under heavy acceleration. LOL
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Registered User
Looks good
Equal Opportunity !!!
SWEET !!! Grommets are Good ... I know a guy you should explain those to !!! LOL
Aaron
F**K Photobucket !!!
Starting all over, Again!
That's another funny comment you've come up with, I appreciate the compliment.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Starting all over, Again!
Still working on the electrical side of things and misc., nothing to exciting to photo though. Lol
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Starting all over, Again!
Here is just a simple photo of the relays I wired up for the Magnafuel fuel pump, Meziere electric water pump and the dual electric fans at this time, one step forward is a plus.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Starting all over, Again!
Now I will run the wiring up in the car to the switches mounted in the passenger side kick panel area.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
neighborhood menace
Looks good an looks like u gonna need a lot of wire for this job lol
The HOOPTIE
Starting all over, Again!
Yeah, definitely going to need a little bit of wire. Fortunately I can get all that I need for it.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Starting all over, Again!
Went and got some Delphi weatherproof disconnects to wire in the fuel pump, electric water pump and cooling fans.
Unfortunately Photobucket is down and unable to post pics but I will once it's back up.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Starting all over, Again!
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Starting all over, Again!
Cleaned up the wiring in the rear from the relays and fuse block and running everything as well hidden as possible.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Starting all over, Again!
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Registered User
You have probably covered this in earlier posts but what's this car going to be used as a street car? Nice work btw
2015 Gt
Starting all over, Again!
Had some issues with the ARC 8000 switch panel but it seems to be working now.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Starting all over, Again!
It will be race ready first, I will then work on all the wiring for everything else to make it street worthy.Originally Posted by SN95N/A
The ultimate goal is to put to back on the street.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Moderator
Looking good! I really like those ARC controls setups.
Rick
Rick90lx@yahoo-dot-com
6.27625 liters of turbocharged goodness
Starting all over, Again!
I agree Rick, their switches and and the relay panels being prefabbed make them nice and easy to use.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
There are currently 3 users browsing this thread. (0 members and 3 guests)
Posting Permissions
Reply With Quote
