Page 2 of 12 FirstFirst 123456 ... LastLast
Results 21 to 40 of 235

Thread: 2016 Dirty Dozen Challenge; Rules, Discussion, and Callout Thread

  1. #21
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    331TwistedWedge, you going to be at Kilkare tomorrow? If so this is a callout! All you people in front are holding me up from the #1 spot!

    Not that Ill ever make it there! I just want to get away from Shayne before he passes me!
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  2. #22
    Join Date
    May 2011
    Location
    Liberty Twp
    Posts
    3,118
    That's funny Brian, by the way, I'm not able to make it to KK today.
    With that being said, I did go to E20 last night and the car is faster than before, single digits now.
    But definitely room for improvement though.
    #9 2011 Spring Street Car Shoutout

    1991 Mini Tubed Mustang Coupe, in the works.
    351W base, PG, Stock Suspension chassis

  3. #23
    Join Date
    May 2011
    Location
    Liberty Twp
    Posts
    3,118
    Me and Shannon have a call out, date to be determined.
    #9 2011 Spring Street Car Shoutout

    1991 Mini Tubed Mustang Coupe, in the works.
    351W base, PG, Stock Suspension chassis

  4. #24
    Join Date
    May 2011
    Location
    Liberty Twp
    Posts
    3,118
    As some already know and others will come to know, Tony (aka Dtony) has had a catastrophic failure, let's pray for a speedy recovery...
    #9 2011 Spring Street Car Shoutout

    1991 Mini Tubed Mustang Coupe, in the works.
    351W base, PG, Stock Suspension chassis

  5. #25
    Join Date
    Feb 2004
    Location
    Troy, Ohio
    Posts
    1,445
    Quote Originally Posted by 2Fast4You View Post
    As some already know and others will come to know, Tony (aka Dtony) has had a catastrophic failure, let's pray for a speedy recovery...
    Agreed.
    Greg
    Midnight Mafia

  6. #26
    Join Date
    Mar 2011
    Location
    Mason
    Posts
    357
    Thanks, hoping to come up with a plan soon. Just not sure how fast it can materialize due to the amount I spent on this build. I will start with a tear down and see what is salvageable.

    Good luck guys.
    2011 5.0 with a couple turbos.
    Best ET 8.87 lifting....

  7. #27
    Join Date
    May 2011
    Location
    Liberty Twp
    Posts
    3,118
    Do you have the other short block or was this built using it?
    #9 2011 Spring Street Car Shoutout

    1991 Mini Tubed Mustang Coupe, in the works.
    351W base, PG, Stock Suspension chassis

  8. #28
    Join Date
    Mar 2011
    Location
    Mason
    Posts
    357
    I don't have another one. When we pulled the old one down it had a slight crack in a cylinder. It had been using a little water for a while, I guess that's why. Definitely won't put it back in.
    2011 5.0 with a couple turbos.
    Best ET 8.87 lifting....

  9. #29
    Join Date
    May 2011
    Location
    Liberty Twp
    Posts
    3,118
    I understand that, maybe a transplant is in order.
    Last edited by 2Fast4You; 05-20-2016 at 04:35 PM.
    #9 2011 Spring Street Car Shoutout

    1991 Mini Tubed Mustang Coupe, in the works.
    351W base, PG, Stock Suspension chassis

  10. #30
    Join Date
    Mar 2011
    Location
    Mason
    Posts
    357
    It still be a coyote, just have to save some money and regroup. When it comes to race cars I'm a cash only guy.
    2011 5.0 with a couple turbos.
    Best ET 8.87 lifting....

  11. #31
    Join Date
    Sep 2011
    Posts
    733
    Sorry to hear about your engine tony

  12. #32
    Join Date
    Mar 2011
    Location
    Mason
    Posts
    357
    I am back in the game. New motor out today and will be torn down and repaired. In the mean time I was lucky enough to find a ford racing aluminator. I will be calling some peeps out very soon.
    2011 5.0 with a couple turbos.
    Best ET 8.87 lifting....

  13. #33
    Join Date
    Sep 2011
    Posts
    733
    Good to hear

  14. #34
    Join Date
    Jan 2008
    Posts
    8,841
    Quote Originally Posted by Dtony View Post
    I am back in the game. New motor out today and will be torn down and repaired. In the mean time I was lucky enough to find a ford racing aluminator. I will be calling some peeps out very soon.
    Well that's good news. I hope that FRPP provided some partial coverage on the mishap. They provided me an entire long block once, after the replacement heads took out the short block at startup on my 02. I sent the head in question back, they analyzed it and said it was their fault. Sent me a new long block less intake and let me even keep the one good head. I gave that to a guy on here some years back after I sold the 2002. Never had an issue with FRPP or whatever they call themselves these days other than they are a bit pricey.

  15. #35
    Join Date
    May 2011
    Location
    Liberty Twp
    Posts
    3,118
    Glad to hear Tony! Or maybe not! Lol
    #9 2011 Spring Street Car Shoutout

    1991 Mini Tubed Mustang Coupe, in the works.
    351W base, PG, Stock Suspension chassis

  16. #36
    Join Date
    Mar 2011
    Location
    Mason
    Posts
    357
    Quote Originally Posted by redfirepearlgt View Post
    Well that's good news. I hope that FRPP provided some partial coverage on the mishap. They provided me an entire long block once, after the replacement heads took out the short block at startup on my 02. I sent the head in question back, they analyzed it and said it was their fault. Sent me a new long block less intake and let me even keep the one good head. I gave that to a guy on here some years back after I sold the 2002. Never had an issue with FRPP or whatever they call themselves these days other than they are a bit pricey.
    My block was from a builder that put in darton sleeves. I'm not going to speculate much until we tear it down. But it isn't a Ford crate engine that failed, it was custom work.
    2011 5.0 with a couple turbos.
    Best ET 8.87 lifting....

  17. #37
    Join Date
    Jan 2009
    Location
    Hillsboro, Ohio
    Posts
    7,916
    Good to hear Tony! Hopefully not much is hurt on the new motor and is a cheap fix.
    1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
    1993 Reef Blue hatch, 347, 3550, and a kit.
    1992 Gould GT project...

  18. #38
    Join Date
    Jan 2008
    Posts
    8,841
    Quote Originally Posted by Dtony View Post
    My block was from a builder that put in darton sleeves. I'm not going to speculate much until we tear it down. But it isn't a Ford crate engine that failed, it was custom work.
    gotcha. Glad you can get it back on the road sooner either way.

  19. #39
    Join Date
    Feb 2004
    Location
    Springboro, OH
    Posts
    6,289
    Good to hear. Let me know what happened with the darton sleeves, we are getting ready to send an engine to them for sleeves soon. Going to have darton do the machining and install of the sleeves.

  20. #40
    Join Date
    May 2011
    Location
    Liberty Twp
    Posts
    3,118
    Interesting minds want to know, I meant, interested minds want to know.
    #9 2011 Spring Street Car Shoutout

    1991 Mini Tubed Mustang Coupe, in the works.
    351W base, PG, Stock Suspension chassis

Thread Information

Users Browsing this Thread

There are currently 2 users browsing this thread. (0 members and 2 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •