After 9-years in our home, I finally made it happen. Wasn't to bad, but the installation directions were horrible, good thing I can think outside the box. Hahaha
Sent from my SM-G975U1 using Tapatalk
After 9-years in our home, I finally made it happen. Wasn't to bad, but the installation directions were horrible, good thing I can think outside the box. Hahaha
Sent from my SM-G975U1 using Tapatalk
Last edited by 2Fast4You; 03-31-2020 at 01:25 PM.
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
Lets see the ceiling!
http://stangbang.tripod.com/ Where all this began!
http://stangbang.tripod.com/twisted/ Vinny
1984 Mustang build @craig_btr on Instagram
Very nice! Glad to see you get it put up!
What I would do to have a nice lift!!!
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Enjoy
http://stangbang.tripod.com/ Where all this began!
http://stangbang.tripod.com/twisted/ Vinny
1984 Mustang build @craig_btr on Instagram
My garage has 8 ft ceilings... Id love to have one but until I build another garage or buy a new place, Im stuck. My garages is 30x69 but in no ways do I have much of an option to put a lift in. I could probably do it in the back part but the concrete was already done and its pretty shallow.
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
I hear you on that, my ceilings are 10'3", I may have to raise the ceiling area above the car roof area once I get the car on there, if I can even do that. I know I'll be able to currently raise the car 4'6" to 5', I'll find out shortly. Better than crawling underneath it while on Jack stands.
Sent from my SM-G975U1 using Tapatalk
#9 2011 Spring Street Car Shoutout
1991 Mini Tubed Mustang Coupe, in the works.
351W base, PG, Stock Suspension chassis
I may have to come down there and let you change my oil... i hate rolling around on the ground. haha. Very cool, Shayne.
Sent from my iPhone using Tapatalk
#2 - 2020 DD Challenge List
1997 Cobra - C heads, Cams, Sullivan intake, long tubes, homemade cai, 4.30, strange axles, e85, chromoly cage
2000 Saleen S281SC - factory "stock"
Mine was 10'3" and I had the ceiling cut. But, I dont have any rooms above my garage.
http://stangbang.tripod.com/ Where all this began!
http://stangbang.tripod.com/twisted/ Vinny
1984 Mustang build @craig_btr on Instagram
Im jealous of both of you!!!
I have contemplated pouring a pad out in front of my garage and putting one outside. Ive seen it multiple times and the people Ive talked to actually like it. Im redneck as hell as it is and I don't live in a fancy neighborhood or anything so I wouldn't have any issues.
I don't think I could put one in the garage due to it being a pole barn. It would be offset to one side or the other and I wouldn't gain much room at all by boxing in the ceiling.
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
http://stangbang.tripod.com/ Where all this began!
http://stangbang.tripod.com/twisted/ Vinny
1984 Mustang build @craig_btr on Instagram
#2 - 2020 DD Challenge List
1997 Cobra - C heads, Cams, Sullivan intake, long tubes, homemade cai, 4.30, strange axles, e85, chromoly cage
2000 Saleen S281SC - factory "stock"
Man, by the time this crap is over, we wont know how to act!
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
Over? This won't be over...
Probably not. Not for a long time.
1992 Mustang LX Coupe, 302, PA C4 and On3 70mm.
1993 Reef Blue hatch, 347, 3550, and a kit.
1992 Gould GT project...
There are currently 1 users browsing this thread. (0 members and 1 guests)