91 Mini Tubbed Mustang Coupe

[NXcoupe]

Congrats Shayne!

[2Fast4You]

Thanks Mike.
Anyone know anybody that has messed with the Lexan Scoops, not the best looking creations but as long as it is functional I believe that's the way I'm heading?

[2Fast4You]

Not any pictures right now but slowly working on some other things on the car. It is currently at Rogue Race Cars, hopefully it will be ready to be picked up in a couple weeks. Then it will go to Bruce Gould for all the body panels to be lined up. Once that is good, it will go to the Chassis Dyno to see what we can get to the rears wheels.

[Kwik92GT]

Awesome! Keep at it!

[2Fast4You]

Surely am Aaron, waiting for other individuals to do their part to make this happen.

[2Fast4You]

I'm being told that the finishing touches on the chassis should be finished this week, time will tell...

[2Fast4You]

Here are a couple photos of the rear end brace, 3.5" exhaust installed and some bracing for the fuel cell and battery box.

http://i1096.photobucket.com/albums/g338/way2fast4you2/Exhaust%20install_zpss0hw6obi.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/Exhaust%20install_zpss0hw6obi.jpg.html)
http://i1096.photobucket.com/albums/g338/way2fast4you2/Rear%20end%20brace_zpsw5doy5xc.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/Rear%20end%20brace_zpsw5doy5xc.jpg.html)
http://i1096.photobucket.com/albums/g338/way2fast4you2/Battery%20box%20and%20fuel%20cell%20brace_zpsc6ftp ohd.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/Battery%20box%20and%20fuel%20cell%20brace_zpsc6ftp ohd.jpg.html)

[k062693w]

Woo Hoo Pics !!!
Looks Good Shayne ...


Now be honest ... Who took the pics ??? LOL

[2Fast4You]

Rob at Rogue Race Cars took the pics Aaron, that's the honest truth.
I know, your still waiting for photos on the BBF coupe...

[k062693w]

Rob at Rogue Race Cars took the pics Aaron, that's the honest truth.
I know, your still waiting for photos on the BBF coupe...

I like pics of ALL Projects ... That's and giving people Shit, Occasionally !!! LMFAO

[draggin50]

Looks good! Glad to finally see some pictures!!!

[Rick93coupe]

That differential cover is wild! Looks like awesome workmanship man.

[Kwik92GT]

Very nice! Gonna be sweet when it's finished. Keep the pics/updates coming.

[2Fast4You]

Spent some time this evening at Rogue Race Cars, took some scotch bright to the underside where it was bare metal. It had accumulated some surface rust as you can see in the photo with the fuel cell. Then I sprayed it all in flat black, sorry but I didn't take any photos of that. We also worked on the engine limiters and alternator mounting bracket. More photos will follow soon on this one, now on to post photos of the other one.

[2Fast4You]

Spent the day at Rogue Race Cars, got a lot accomplished. We feel the car is ready to go so off to Bruce Gould to get some body panels aligned on it.

Suspension was reworked to allow the 3 1/2" exhaust and to help prevent it from dragging the pavement. The front of the car was raised appr. 2 1/2-3" and the rear was raised appr. 2-2 1/2", Love the stance on it.
http://i1096.photobucket.com/albums/g338/way2fast4you2/WP952015062095189507955395Pro_zps0nhmb9i4.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/WP952015062095189507955395Pro_zps0nhmb9i4.jpg.html )
http://i1096.photobucket.com/albums/g338/way2fast4you2/WP952015062095189507953895Pro_zps8eezouc7.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/WP952015062095189507953895Pro_zps8eezouc7.jpg.html )
Oil fill cap installed
http://i1096.photobucket.com/albums/g338/way2fast4you2/WP952015062095189510953995Pro_zpsp9x0bm1n.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/WP952015062095189510953995Pro_zpsp9x0bm1n.jpg.html )
Alternator installed
http://i1096.photobucket.com/albums/g338/way2fast4you2/WP952015062095189504955995Pro_zpsqk4ccjwr.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/WP952015062095189504955995Pro_zpsqk4ccjwr.jpg.html )
Engine limiters installed
http://i1096.photobucket.com/albums/g338/way2fast4you2/WP952015062095189506950395Pro_zpstz4egoda.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/WP952015062095189506950395Pro_zpstz4egoda.jpg.html )
Tow strap/tie down ring installed in the front and on the rear

[2Fast4You]

Also installed front and rear tow/tie down rings, this is a pic of the front.
http://i1096.photobucket.com/albums/g338/way2fast4you2/WP952015062095189509955695Pro_zpsthfmhcex.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/WP952015062095189509955695Pro_zpsthfmhcex.jpg.html )

[k062693w]

AWESOME !!!
She's coming along !!!

[2Fast4You]

Thanks Aaron, it is coming along surely. We also scaled the car again today and rechecked the tow, total weight with me in it and adding 41.5lbs in the center rear of it we came up with 2900lbs total. That's with me the driver in it, all fluids including a full 5 gallons of fuel and so on. I'm feeling pretty confident that this will be making some passes soon and getting down the track in a hurry. The only down fall at this time is that it has a 3.27 gear in the rear end, didn't find that out until today while we had it on the lift. I'm going to roll with that for the time being but will need to look into a steeper gear soon. It's a great highway gear and this is my street car after all. Lol

[draggin50]

Nice looking work! But you can expect that from Rob!

Hope to see it out soon!

[2Fast4You]

Well, the latest update is, installing a window net to finalize the work at Rogue Race Cars. The car sounds absolutely fantastic with the exhaust on.

[chris91]

Don't talk about exhausts with no videos man!! LoL

[k062693w]

Don't talk about exhausts with no videos man!! LoL

I'm telling you ... I'm thinking about getting him a go pro and stapling it to his forehead !!! LOL

[2Fast4You]

Lol, I was so wrapped up in hearing it for myself that I didn't even comprehend taking a video with it running now that the exhaust is on there, Sorry.
I will get a video of it soon running with the exhaust on it guys.

[draggin50]

Video mister!!!

[2Fast4You]

Forgot to mention as well that we replaced the existing front coil over springs QA1 12-170 for some Hypercoil 14-150's up front. This should give us a little more height adjustment and to be able to get the weight to the back wheels as we want.
With this being said, the QA1 12-170's are for sale if anyone may be interested.

[2Fast4You]

Just an FYI,
Unfortunately we were not able to get the car to Bruce yesterday, it will leave Rob's this Monday heading straight to him then. Once it's finished there I will arrange to get it on the chassis dyno to tune it out in preparation to get it to the track.

[k062693w]

Woo Hoo !!! Good to Hear !!!
We will EXPECT Video !!!

[2Fast4You]

Most certainly there will be video's Aaron, more to come.

[2Fast4You]

Here is a photo of the rear tie down rings in use that were recently installed as well as the car loaded up to head to Bruce Goulds body shop this past Monday. I have also included photos of the window net installed.

http://i1096.photobucket.com/albums/g338/way2fast4you2/tie%20down%20rings_zpspty1tfgp.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/tie%20down%20rings_zpspty1tfgp.jpg.html)
http://i1096.photobucket.com/albums/g338/way2fast4you2/Car%201_zpslnsvawx6.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/Car%201_zpslnsvawx6.jpg.html)
http://i1096.photobucket.com/albums/g338/way2fast4you2/car%202_zpsy3ztksaq.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/car%202_zpsy3ztksaq.jpg.html)
http://i1096.photobucket.com/albums/g338/way2fast4you2/Window%20net%202_zpskmqxwidk.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/Window%20net%202_zpskmqxwidk.jpg.html)

[Maximus]

Chevy door handles?? WTF???!? :D

[2Fast4You]

Chevy door handles?? WTF???!? :D

Funny, isn't it. I wonder who in the world thought of installing those? Lol

[Maximus]

Funny, isn't it. I wonder who in the world thought of installing those? Lol

probably the same dingdong who would have LSx'd it.:cool1:

[2Fast4You]

Probably, most definitely...

[k062693w]

Coming Along Nicely Shayne ...
And you even remembered pics !!! LMFAO

[2Fast4You]

Your correct, I did remember photos. Lol

[NXcoupe]

Looks good shane. Glad you are making progress. What color is it going to be? The orange?

[draggin50]

That will make 2 orange mini tubbed coupes around! Mine is heading to paint too!

[2Fast4You]

Yup, House of Kolors-Sunset Pearl.

[Maximus]

Yup, House of Kolors-Sunset Pearl.

You have good taste in colors.

[mustang8998]

You have good taste in colors.

Is that the color you put on the SN95 you built?

[Maximus]

Is that the color you put on the SN95 you built?

Yes it is. :)

[mustang8998]

Yes it is. :)

That was purdy!

[2Fast4You]

It will be a beautiful car again, someday. Lol

[chris91]

Is Bruce painting it? Should turn out great in his hands. Any idea when it'll be done? Can't wait to see this thing in color again.

[2Fast4You]

Bruce will be painting it, just not at this time, low funds right now. He's just aligning the body panels, installing the glass for now and then to the chassis dyno.

[Stangman]

Glad you're having the panels aligned. Nothing more annoying then a beautifully painted car that all the panels are out of whack on.

[draggin50]

Bruce will be painting it, just not at this time, low funds right now. He's just aligning the body panels, installing the glass for now and then to the chassis dyno.

He filling all the holes in the fire wall too?

[2Fast4You]

He filling all the holes in the fire wall too?

No, just lining everything up at this time.

[2Fast4You]

By the way, I just wanted to relay that Bruce told me yesterday that the Stang sounds absolutely horrible. Lol
And I even asked him if he took a video of it running, nope.

[2Fast4You]

Well, Bruce told me today that he has everything lined up and the only thing left to do is to install the hood latch assy components.
Next step, get it on the chassis dyno and get it set up to hit the track. Hopefully by next weekend I will be heading somewhere to start making some passes, it's only been 4 years in the making for this car.

[USMCPONY]

Well, Bruce told me today that he has everything lined up and the only thing left to do is to install the hood latch assy components.
Next step, get it on the chassis dyno and get it set up to hit the track. Hopefully by next weekend I will be heading somewhere to start making some passes, it's only been 4 years in the making for this car.

Hard work pays off buddy. This is a car built entirely by you. I'm not looking forward to racing you.

[k062693w]

I'm Happy for you Shayne ...
I know exactly how it feels after years of waiting ... But at least you don't have the Bad Mojo lingering oven you like I Did !!! LOL

Hopefully you make your debut at KK, So I can come see it !!!

[2Fast4You]

Well, took Bruce the hood latch components I had and decided to fire it up and take a video.
Bruce sent me a video as well but I'm having problems with the audio.

http://i1096.photobucket.com/albums/g338/way2fast4you2/th_IMG_0405_zpsshmdy4em.mp4 (http://i1096.photobucket.com/albums/g338/way2fast4you2/IMG_0405_zpsshmdy4em.mp4)

[SN95N/A]

Audio works sounds rowdy lol

[2Fast4You]

Thanks, the video does it No Justice.

[draggin50]

Is that a Honda engine? Sounds like a 2 stroke!

[k062693w]

Sounds Really Good Shayne ...

It should be a Solid High 12 second car ... LMFAO ...

Just messing with you Buddy ...
If it runs as good as it sounds, It should be Impressive !!!

[2Fast4You]

Is that a Honda engine? Sounds like a 2 stroke!

That's exactly what it is. Lol


Sounds Really Good Shayne ...

It should be a Solid High 12 second car ... LMFAO ...

Just messing with you Buddy ...
If it runs as good as it sounds, It should be Impressive !!!

Every bit of the 12 second zone, at least. Lol

[86gt40]

Sounds sweet !

[2Fast4You]

Thanks everyone for the kind thoughts, even you Brian. Is that a Honda 2-stroke, get out of here!

[draggin50]

Haha!!! Have to give ya shit! Its only been what 4 years now??? Ive been ready to see it out since 2011!

[2Fast4You]

Haha!!! Have to give ya shit! Its only been what 4 years now??? Ive been ready to see it out since 2011!

I know and I'm not mad at you at all for that, I've been ready since 2011! Lol

[2Fast4You]

http://vid1096.photobucket.com/albums/g338/way2fast4you2/IMG_0405_zpsshmdy4em.mp4

http://i1096.photobucket.com/albums/g338/way2fast4you2/th_IMG_0405_zpsshmdy4em.mp4 (http://i1096.photobucket.com/albums/g338/way2fast4you2/IMG_0405_zpsshmdy4em.mp4)

[2Fast4You]

Car is ready for the chassis dyno, looking forward to it soon. I surely hope that the weather pans out for a trip to the track this weekend.

[Kwik92GT]

Badass! :bigthumb

[2Fast4You]

Car made it home safely tonight, next step is to put it on the Dyno.

[2Fast4You]

So, went to install my new harness last night and guess what? Wasn't able to install them, they were suppose to be the ones that the shoulder harnesses wrap around the back roll bar and they were the bolt-in. I know things happen but I'm on a tight schedule to get this car out as it is!

[2Fast4You]

Did some other work needed on the car. Didn't have a restrictor plate in the cooling system so it was getting up to 200 degree's when I was down at E20 2-weekends ago. Made a restrictor plate and pulled the cooling fans into the engine compartment to pull the fresh air into it. Didn't test this until today and had great results, with the pump on it got to about 190 degrees. I then turned on the fan and almost instantly dropped to about 185 degrees and kept dropping, didn't even think about getting any warmer. I am happy with the results.

[draggin50]

Hell yeah! That's good to hear!

[k062693w]

Good Deal Shayne ...
Not much more tinkering and you can get that Bitch Painted ...

Of Course I'm not a big fan of that Rainbow theme you're going with !!! LMFAO

[redfirepearlgt]

can't wait to see this thing go down the track.

[86gt40]

I am the only person slower than shayne. Geesh

[SN95N/A]

Idk I may have you both beat

[2Fast4You]

Thanks guys, there are a few other minor things I want to do prior to getting it to the track. Hopefully my harness comes in today, that would be one less thing to mark off the list of things to do. I am shooting to make it to the track this Friday still, anyone else planning on making it to E20?

And Aaron, There will be No Rainbows here........................................

[draggin50]

Rainbows go with Unicorns though!

[2Fast4You]

^^^^^^Lol,it's all Aaron on that one. ^^^^^^

[k062693w]

^^^^^^Lol,it's all Aaron on that one. ^^^^^^

NOT !!! I'm into skulls, flaming horses and tribal that's my bag !!! LMFAO

[2Fast4You]

Darn, still no harness, hopefully tomorrow then.

[k062693w]

Darn, still no harness, hopefully tomorrow then.

Should have taken me up on mine Huh ??? LOL

[2Fast4You]

Only time will tell.

[2Fast4You]

Wired up the locking mechanism for the deck lid last night, works well. The only thing is that there currently is no manual way to unlatch it if the solenoid fails on it, that will be next.

[Rick93coupe]

I made mine functional too. It's kind of nice to be able to pop the trunk with the original button. I do have the key cylinder installed in mine though.

[2Fast4You]

I'm using the glove box button as well and unfortunately the original key cylinder has been made obsolete. Lol
Craig had it removed and smooth over.

[2Fast4You]

The harness has arrived and it is supposed to be the correct one this time!
This will keep me busy for a little while tonight!

[Maximus]

I'm using the glove box button as well and unfortunately the original key cylinder has been made obsolete. Lol
Craig had it removed and smooth over.

Damn. That guy fucked up all kinds of stuff on that Coupe!:mad:

[cyah92]

Lol

[2Fast4You]

new harness has been installed, one less thing needed to run on Friday.

http://i1096.photobucket.com/albums/g338/way2fast4you2/5-point%20harness_zpsthtrnt4u.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/5-point%20harness_zpsthtrnt4u.jpg.html)

[86gt40]

Ok now that we're closer. Who you thinking about calling out? Yes I'm being a bit presumptuous, but I'm being positive.

[2Fast4You]

It's all about making it to the front, you know that! But now it's about where do I start, good question? Lol

[k062693w]

new harness has been installed, one less thing needed to run on Friday.

http://i1096.photobucket.com/albums/g338/way2fast4you2/5-point%20harness_zpsthtrnt4u.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/5-point%20harness_zpsthtrnt4u.jpg.html)

??? Nice Harness, But why would you get RJ's put on them, I thought your name was Shayne ???
But hey, It's your car !!! LMFAO

[draggin50]

It's all about making it to the front, you know that! But now it's about where do I start, good question? Lol

I think you should start with Todd and then whoever wins gets to challenge the #12 spot. Like Farmtruck!!!

[86gt40]

If I may suggest. If it's all about going to the front. Start at the big dog !

[SN95N/A]

Put the big pills in it and call out #1 guy.

[NXcoupe]

Id start with #3 and go up, or start low and work your way up. Since the list is full, you lose you're not on the list. Car sounds great and is really coming together nicely.

[2Fast4You]

??? Nice Harness, But why would you get RJ's put on them, I thought your name was Shayne ???
But hey, It's your car !!! LMFAO

Your a nut, No doubt about it!

[2Fast4You]

I think you should start with Todd and then whoever wins gets to challenge the #12 spot. Like Farmtruck!!!

Interesting idea, that race will happen never the less, whether it's for the list or not! Lol

- - - Updated - - -


If I may suggest. If it's all about going to the front. Start at the big dog !

I get the idea behind this, go big or go home! Lol

[draggin50]

Id start with #3 and go up, or start low and work your way up. Since the list is full, you lose you're not on the list. Car sounds great and is really coming together nicely.

Thanks buddy!!! I haven't really got to enjoy it here at #3 yet!

[2Fast4You]

It's funny how he just pulled #3 out of thin air! Lol

Brian,
Just an FYI, No one is safe on this list, just ask Beefcake! Lol
Just busting your balls Beef.

[draggin50]

I know! I steal his spot, and he throws me right under the bus!!!

[draggin50]

But really, #3 is where the bottom of the list starts right now I think. Above that, you have Beefcake and Shannon and both of those cars are quick. And Chad will take my spot soon too. His runs real good. And if Tony and Bill get a chance they will be on there soon also.

There are a lot of fast cars on here. Just have to get them to the track and set up some races. Im sure your car will make enough power to be up front as well.

[NXcoupe]

I'm hitting the dyno friday to verify the problem is fixed. Then turn up the boost, then get the slicks outta the storage room and go up the list. I think low 10s are doable. Depends on what the dyno says and how my trans holds up.

[NXcoupe]

Thanks buddy!!! I haven't really got to enjoy it here at #3 yet!

Neither did I! Lol. But didnt even think who was there in that spot.

[2Fast4You]

I installed this special switch today just for you Mike, your welcome! Lol

http://i1096.photobucket.com/albums/g338/way2fast4you2/Trans%20Brake%20switch_zpsgwq6swg1.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/Trans%20Brake%20switch_zpsgwq6swg1.jpg.html)

[86gt40]

http://i92.photobucket.com/albums/l11/86gt40/MG_1439461982621_zps0wvmv60a.jpg (http://s92.photobucket.com/user/86gt40/media/MG_1439461982621_zps0wvmv60a.jpg.html)

[draggin50]

Hey Jason, im offended by that!!!

[86gt40]

Hey Jason, im offended by that!!!

Yea, no your not

[draggin50]

I can live with 700hp, 10.50's, at 3800lbs and a man pedal!

- - - Updated - - -

Oh and don't forget A/C!!

[86gt40]

I'm with ya brian. I had the auto trans to run sitting in the garage, I couldn't pull the trigger. It went to a good home yesterday, I'll stick with my t5 , until age takes my left leg out. It's all about preference.

[k062693w]

http://i92.photobucket.com/albums/l11/86gt40/MG_1439461982621_zps0wvmv60a.jpg (http://s92.photobucket.com/user/86gt40/media/MG_1439461982621_zps0wvmv60a.jpg.html)

That's Flipping Hysterical !!! LMFAO

[SN95N/A]

It's all about how fast do you really want to go

[86gt40]

Well I had the stick to win races.....gave it up to keep mine 5 speed. The automatic will be put to good use, just not by me.

[2Fast4You]

That's a good fact, I will enjoy mine as well. I want mine to go as fast as it's capable.

[2Fast4You]

Started making passes last night for it's Main Voyage as Chad stated.
Still a lot to do with it, it will get better from here.
Thanks to everyone that helped me last night, I really do appreciate it!!!

[2Fast4You]

http://i1096.photobucket.com/albums/g338/way2fast4you2/first%20and%20second%20passes_zpstkybmzoj.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/first%20and%20second%20passes_zpstkybmzoj.jpg.html )

[Rick93coupe]

You sure can't complain about that. There's a lot left in that setup for sure!

[2Fast4You]

Thanks Rick,
There is definitely room for improvements, it will just take some time to get it figured out.

[SN95N/A]

U spraying that thing?

[draggin50]

That was on a 250 shot I heard!

[Kwik92GT]

Awesome that you're out there having fun with this now! Can't wait to see it painted, going to look killer. :bigthumb

[2Fast4You]

U spraying that thing?

All engine, No Spray, Yet!


That was on a 250 shot I heard!

Lol
Don't be making rumors, not yet anyways!

[SN95N/A]

That's impressive all motor bud

[2Fast4You]

That's impressive all motor bud

Thanks, I'm really expecting more out of the engine.
Just takes some time, tuning and changes in multiple areas.

[draggin50]

I figured I'd take the nitrous rumors off Shannon and stick them on you!!

[2Fast4You]

I appreciate that, everyone needs a fall guy.
Just let Shannon know that he's welcome for me to take some of the heat for a while.

[2Fast4You]

So, as for everyone that was at E20 on Friday. They know that I had a technical issue that caused the car to smoke while going down the track like a freight train on my second pass. Well, after some evaluation with my brother, here is what we didn't find keeping the oil from under coating the entire car and components!
Not happy about it, but at the same time I thank God that worse things didn't happen as a result from this!

http://i1096.photobucket.com/albums/g338/way2fast4you2/oil%20pan%20drain%20plug_zpsq1o6l9ma.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/oil%20pan%20drain%20plug_zpsq1o6l9ma.jpg.html)
http://i1096.photobucket.com/albums/g338/way2fast4you2/oil%20pan%20drain%20plug%202_zps60hnrbv1.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/oil%20pan%20drain%20plug%202_zps60hnrbv1.jpg.html)

[draggin50]

I'll make sure he knows!!!

Good thing you caught that. Hope all is well and everything is good now.

[2Fast4You]

I believe everything is Ok, still had good oil pressure so I don't think anything is hurt. going to drain the oil and see how much was actually lost from it and to check for any fragments.
All I can say is, it wasn't pretty under there.

[2Fast4You]

Most of you don't know but I have been chasing an excessive valvetrain noise that I just couldn't figure out. This is one reason for being so nervous to make that first pass down the track, as most could tell, Lol. I decided to pull the valve covers again today just to give things a once over again. I started checking the rocker movement and to my surprise I found excessive movement between the rocker itself and the trunnion. I'm going to call Comp Cams tomorrow and see if they still offer the rebuild kits for these rockers. I also have a charging system issue, had the 1-wire GM Delco Remy alternator tested at J&N Auto Electric and they said it was good. So I'm going to replace the battery being it is a couple years old and see if this helps, I was only able to start the car 5-6 times and then it was dead. I guess that's to be expected with the new build jidders.

[Rick93coupe]

You probably already know it but grounds are a big deal on a battery relocation. I was having a charging issue that ended up being a missing ground to the frame in the back of the car, even though the battery was tied directly to the back of both heads.
Secondly I thought it was fixed because my voltage was much better but realized my battery disconnect didn't work, so I ran the charging wire from the alt all the way back to the battery side of the switch and it's better than ever. The lowest I've ever seen it is 13.5 volts.

[2Fast4You]

Thanks Rick, I will eventually figure it out. It sounds like a ground to me as well but the alternator from what I understand is self grounded to the engine and shouldn't require anything else. So with that being said, I'm going to add some ground straps to the engine block to see if that helps out.

[Rick93coupe]

Yep self grounding, unless the engine isn't grounded well, lol.

Good luck, you'll figure it out.

[2Fast4You]

Going to pull the rockers off today as well and get them sent out to Comp Cams.
Went ahead and got a new battery as well, couldn't hurt I would think.

[k062693w]

Get it done so you can put that NX Kit on and Turn that Bitch Up !!!

[2Fast4You]

Get it done so you can put that NX Kit on and Turn that Bitch Up !!!

For real, that's what happens when you go with used parts!

[k062693w]

For real, that's what happens when you go with used parts!

Nothing Wrong with used parts ...
Where would the Fun be if we could all afford New and the Best ... That would be like Communism !!! :lol:

[2Fast4You]

I installed the new battery and guess what? The initial power output from the alternator now starts out at 14v and hangs in steady at 13.55-13.79, I think that's good to start with? Lol
Now it's time to remove the rockers,2-3 weeks to get them back.

[k062693w]

Just buy a New Set Mr. Money !!!
Then you'll have the rebuilt ones as spares ...

[2Fast4You]

Well, I know how everyone here loves photos. So lets play a game of "What's missing in this picture?"

http://i1096.photobucket.com/albums/g338/way2fast4you2/Roller%20rockers%201_zpsgwuoxzyh.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/Roller%20rockers%201_zpsgwuoxzyh.jpg.html)
http://i1096.photobucket.com/albums/g338/way2fast4you2/roller%20rockers%202_zpspr8ltqln.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/roller%20rockers%202_zpspr8ltqln.jpg.html)

Has anyone figured it out? That's correct, the roller rockers. Getting ready to ship them out tomorrow!

http://i1096.photobucket.com/albums/g338/way2fast4you2/roller%20rockers%203_zpstmvjhbtw.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/roller%20rockers%203_zpstmvjhbtw.jpg.html)

[k062693w]

I was going to say the NX Plate was missing, Because I don't see it in the pics !!!
I'm thinking that your Askeerded !!! :lol:

[2Fast4You]

I was going to say the NX Plate was missing, Because I don't see it in the pics !!!
I'm thinking that your Askeerded !!! :lol:

That's wrong BOB, I mean Aaron!
It's staying cozy until needed.

[draggin50]

I was gonna go with the speedo cable..

Damn I guess I didn't win nothing!

- - - Updated - - -


That's wrong BOB, I mean Aaron!
It's staying cozy until needed.

Now we have a Bob and Bill!!!

[2Fast4You]

It's just a revolving door Brian, who knows who will be in here next! Lol

[2Fast4You]

Just an update on my roller rockers from Comp, they have informed me today that out of the (16) of them that only (2) able to be repaired. Well, that means a new set are in order. I like new things but wasn't anticipating this already, so the car will be down a little longer unless a set of good rockers end up here like magic.

[2Fast4You]

Well, thanks to my brother I have rockers back on the car. Now I will be installing a wideband, time to take the exhaust off the weld the bung on then wire it all in. Hoping to be at the track next Friday!

[2Fast4You]

Removed the X-Pipe the other evening to have a bung welded on for the wideband, also had to reseal the header do to an exhaust leak. Hoping to be at the track with it on Friday (tomorrow). Everything has been put back together other than wiring the wideband, hopefully have that finished this evening.

[2Fast4You]

Wideband has been installed.

http://i1096.photobucket.com/albums/g338/way2fast4you2/WP952015092495209554951095Pro_zpssqsu46ca.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/WP952015092495209554951095Pro_zpssqsu46ca.jpg.html )

[draggin50]

Lookin good!!! Now make some passes and see what that thing will do!!

[2Fast4You]

I'm planning on being at the track tonight with it, just need to get some things together to make it happen.

[2Fast4You]

Finally made some passes this past season, now more mods have started for this coming season.
Swapped a 3.73 ring and pinion in place of the 3.27, 4.10 on stand by. MSD Power Grid ignition controller being installed as well.
It seems for every item I complete, multiple other items come a part. The interior is coming out at this time to paint areas of the roll cage, cleaning up some wiring inside the car now also.

[draggin50]

Pictures buddy!!!

You know I cant read!

[2Fast4You]

Not very pretty at the moment Brian! Lol

I have the new Comp Cams Ultra Pro Magnum rollers rockers sitting in oil at the moment, those to go on this weekend.

[draggin50]

I just cant wait till the weather clears and we can get back to the track! I know I cant keep up with ya now but I can watch!

[2Fast4You]

I just cant wait till the weather clears and we can get back to the track! I know I cant keep up with ya now but I can watch!

Doesn't mean that we aren't able to pull them up side by side for fun, you know this!

[draggin50]

Sounds good to me! Im not afraid to lose! Its all in fun for me anyways! Might make for a good picture!

[2Fast4You]

Now about that picture, my car isn't really all that photogenic! Lol

[draggin50]

If its up on the bumper, it don't matter what it looks like!

[2Fast4You]

If its up on the bumper, it don't matter what it looks like!

If we can keep it off the bumper it would be best, I hope the suspension set up will take it straight forward. Time will tell of course, I have a long way to go still.

[draggin50]

Bumper shots make for the best pictures!!

[2Fast4You]

That they do.

[2Fast4You]

I definitely have some work in front of me.

http://i1096.photobucket.com/albums/g338/way2fast4you2/Interior_zpszbrbp2fr.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/Interior_zpszbrbp2fr.jpg.html)

[TooFast98Cobra]

It Will Get There .

[2Fast4You]

Yeah, it will eventually again. Lol
Tore it all back apart to clean up the wiring, install the Grant steering wheel, Grant quick release and install the MSD Power Grid ignition controller.
And paint the roll cage behind the dash, then get it running again prior to installing the NOS.

http://i1096.photobucket.com/albums/g338/way2fast4you2/Interior_zpszbrbp2fr.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/Interior_zpszbrbp2fr.jpg.html)

[draggin50]

Ultra light weight dash I see!!!

[USMCPONY]

Weight reduction level 5000

[2Fast4You]

Ultra light weight dash I see!!!

New composite I came across! Lol

[2Fast4You]

Removed the 3-Step and selector switches in place of this, should give me much more functionality with tunability and logging.

http://i1096.photobucket.com/albums/g338/way2fast4you2/WP952016012695209553953595Pro_zpsbesrxx7g.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/WP952016012695209553953595Pro_zpsbesrxx7g.jpg.html )

[2Fast4You]

So I decided to relocate the relays from the trunk area and move them up front to be more accessible if needed.
So I mounted them with the terminal blocks on the backside of the panel for the ignition and switch panel.
It eliminates additional wiring running too and from the back and looks much cleaner.

http://i1096.photobucket.com/albums/g338/way2fast4you2/WP952016020795179556955895Pro_zpsqejjxsn0.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/WP952016020795179556955895Pro_zpsqejjxsn0.jpg.html )
http://i1096.photobucket.com/albums/g338/way2fast4you2/WP952016020795159542951095Pro_zpsmrinihvd.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/WP952016020795159542951095Pro_zpsmrinihvd.jpg.html )

[2Fast4You]

Got it back together and it runs once again, I must have done something correct with the initial set up on the Power Grid Ignition Controller. Lol

[Maximus]

Got it back together and it runs once again, I must have done something correct with the initial set up on the Power Grid Ignition Controller. Lol

Now that it is running, time to get Chris to lay on that Sunset Pearl!

Why I decided to cut this up, is beyond me...

http://i775.photobucket.com/albums/yy39/CincySpeed/Cars/101194404.jpg (http://s775.photobucket.com/user/CincySpeed/media/Cars/101194404.jpg.html)

But Im sure you will have it looking great again!!

[2Fast4You]

I will Craig, all in good time!

[Maximus]

I will Craig, all in good time!

Sell that Damn motorcycle so you can get the coupe painted!:D

[draggin50]

You still have that bike?

Im with Craig! Move that thing and get the coupe painted! It would look good!!

[2Fast4You]

You still have that bike?

Im with Craig! Move that thing and get the coupe painted! It would look good!!

Yeah, it's up for sale if you know anyone interested.

- - - Updated - - -


You still have that bike?

Im with Craig! Move that thing and get the coupe painted! It would look good!!

Yeah, it's up for sale if you know anyone interested.

[2Fast4You]

The E85Carbs.com conversion is complete, it still runs but needs some fine tuning. Can't wait to see how this Ethanol based fuel works for me! Lol

http://i1096.photobucket.com/albums/g338/way2fast4you2/E85%20Carb%20Conversion_zpsbin1kxt5.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/E85%20Carb%20Conversion_zpsbin1kxt5.jpg.html)

[USMCPONY]

Do you have to run a flex fuel sensor? I'm curious how it would run on a winter blend vs a summer blend.

[Maximus]

Do you have to run a flex fuel sensor? I'm curious how it would run on a winter blend vs a summer blend.

Thats for EFI only.

[2Fast4You]

Do you have to run a flex fuel sensor? I'm curious how it would run on a winter blend vs a summer blend.

No flex fuel sensor as Maximus (AKA-Craig Lol) stated, is there such a thing as winter and summer blend?

[draggin50]

Out of the pump there is. Just have to test it to see where it stands.

I never test any I get. Mikey said he did at first but then just quit. Said there wasn't that much difference where he got it.

[Maximus]

No flex fuel sensor as Maximus (AKA-Craig Lol) stated, is there such a thing as winter and summer blend?

There is. We have seen anywhere from E65-E85.

You can always get this to test your E....

http://www.jegs.com/i/Holley/510/26-147/10002/-1

[2Fast4You]

I know that there can be a fluctuation in the grade, is it really based on the time of year(summer-winter)?

[draggin50]

In the winter it drops down to around E70 in some spots. Big difference in blend.

I suggest getting a drum. That's probably what I will do this year. Ill have a heated garage so I wont have to worry as much about condensation and such.

[Maximus]

In the winter it drops down to around E70 in some spots. Big difference in blend.

I suggest getting a drum. That's probably what I will do this year. Ill have a heated garage so I wont have to worry as much about condensation and such.

I have to figure a way to plumb in a Flex Fuel sensor on my projects as I intend to drive them on the streets. I would hate to be up at The Green and run out of Drum E85. But for the track, drum E would be cool!

[Rick93coupe]

They add more gas to the E85 mix to make it easier to light off in the winter.

[2Fast4You]

I learn something new everyday, Thanks guys!

[Maximus]

They add more gas to the E85 mix to make it easier to light off in the winter.

No shit?? I thought it was just another reason to charge more. :)

[SN95N/A]

Just about every e85 place around here drops in the winter time I deliver it.I would just get the drum

[Rick93coupe]

The way I look at it, if your using E85 to go fast, your probably not doing a whole lot of driving / racing in the winter. I think you'd be better off buying a drum of Ethanol and mixing it up if you get a lower mixture than you wanted from the pump. You'll be way ahead cost wise too.

[USMCPONY]

I learn something new everyday, Thanks guys!

We just saved you a new motor lol. I highly recommend getting a sensor. When I ordered my fore triple pump. I upgraded it so I could use a sensor. I saw a guy test his in the middle of summer and only got 40%. If a truck driver fills up the wrong tank with 87 octane. It could be the end of your motor if you was to rev it out. Cheap insurance if you ask me.

[2-Tone]

I buy a barrel or two of renegade e85 from Adam each year. I use it anytime I am going to the track. The stuff is pretty reasonable.

During the summer I fill up one of my empties with pump that tests good. That's what I use for running around on the street. My local Kroger and thorntons have tested anywhere from e67 to e88.

[draggin50]

I have to figure a way to plumb in a Flex Fuel sensor on my projects as I intend to drive them on the streets. I would hate to be up at The Green and run out of Drum E85. But for the track, drum E would be cool!

I always carry 2 cans with me anyways. I don't want to run out and the closest place to me is 20 miles away. On the SBZ cruise ins, I fill up before I go and use 1 can on the way home. So much for gas mileage!!!

[2Fast4You]

For now I have just got 5-gallons from the local pump, I'm going to invest in purchasing it by the drum for the race season though.

[draggin50]

Have you tested it?

[2Fast4You]

Have you tested it?

No, it shouldn't be an issue just to run it in the garage.

[draggin50]

I was more curious as to what it tested at. It would be fine to run on either way.

[2Fast4You]

Gotcha

[draggin50]

I haven't ever tested any that I get so Im kinda curious. I need to go get some anyways so I may by the test kit and try it.

[2-Tone]

I broke one of my glass testers and needed to check something quick.

I used this. http://hagensdiy.blogspot.com/2012/04/diy-ethanol-content-tester.html

It actually was just as accurate for those that like diy.

Another option http://www.audizine.com/forum/showthread.php/670422-E85-Ethanol-Test-Test-it-at-your-fuel-station

[m347]

[QUOTE=2-Tone;806168]I buy a barrel or two of renegade e85 from Adam each year. I use it anytime I am going to the track. The stuff is pretty reasonable.

How much is reasonable? What I have seen is way more than good race fuel.

[draggin50]

I broke one of my glass testers and needed to check something quick.

I used this. http://hagensdiy.blogspot.com/2012/04/diy-ethanol-content-tester.html

It actually was just as accurate for those that like diy.

Another option http://www.audizine.com/forum/showthread.php/670422-E85-Ethanol-Test-Test-it-at-your-fuel-station

Thanks for the tip! Im going to look into that. I usually get it from 2 different places so Ill check at both.

[2Fast4You]

A few updates since the last post. I converted to E85 with the E85carbs.com kit, it included everyting to do it using my existing 950HP.
I also removed the stock steering wheel and installed a Grant steering wheel w/ the Grant quick release and adapter.
Installed an LED light in the car so I can see in the evenings. The car still runs after the installation of the MSD Power Grid Ignition Controller, Heck Yeah!
Changed the ring and pinion from the 3.27 to a 3.73, should make a big difference for the 60', 1/8 and in the end 1/4.
As some already know, I was having issues with the car blowing through the tires about 20' out and the car shooting right.
PTC told me that the highway gear was putting to much load on the converter so I needed a bigger gear with this converter.
I will see how the 3.73 works and then install a 4.10 and so on, this is just work in progress. I hope to see some good passes soon.

[redfirepearlgt]

Good to hear Shayne, hope to see it make some passes as soon as the weather does something consistent aside from rain and cold.

[Maximus]

No smokey burnout video?

[2Fast4You]

No smokey burnout video?

Neighbors would not like that unfortunately, I would love to go peel one down the road!


Good to hear Shayne, hope to see it make some passes as soon as the weather does something consistent aside from rain and cold.

Thanks Chad, I'm very eager to get it out and see what happens!

[Maximus]

Neighbors would not like that unfortunately, I would love to go peel one down the road!

Vine St is open 24/7:D

[SN95N/A]

Have you got this thing painted? If so post up some pics i would like to see it.thanks

[2Fast4You]

Have you got this thing painted? If so post up some pics i would like to see it.thanks

Not yet, once I get everything the way I like it. Don't want to hurt a brand new paint job.


Vine St is open 24/7:D

Not sure about all of that Craig. Lol

[draggin50]

Paint wont make it any faster!!

[cyah92]

Paint. It probably will never get painted. I know him a little bit. Lol.

[Maximus]

Paint. It probably will never get painted. I know him a little bit. Lol.

Ill buy that old ass old paint from him.

[2Fast4You]

I will just have to wax the paint job I have, that should knock off a .10 at least. Lol

[draggin50]

Id just sand it down to bare metal and plastic and clear it!

[chris91]

Do it all rat rod style, who needs paint... LoL

[2Fast4You]

It gives that slow, radical, sleeper look.

[redfirepearlgt]

Paint? That adds weight. Spray it down with pledge furniture polish and wipe off the residue. That stuff is slicker than snot on a door knob. And it has a nice lemony scent.

[draggin50]

It gives that slow, radical, sleeper look.

I think the wheels take away the sleeper look!!

[2Fast4You]

Well, we may just have to do something about that then. I want to powder coat them Black Chrome, do you think that will help disguise it?

[2Fast4You]

http://vid1096.photobucket.com/albums/g338/way2fast4you2/Darlene%20photos%202016%202782_zpsosnf9srv.mp4

9.87 @ 137.46 mph

[2Fast4You]

Here you go Brian, this should add to the sleeper look versus the fully polished look these had previously. Told you I would have to do something about it.

http://i1096.photobucket.com/albums/g338/way2fast4you2/V95953D57_zpsk0o88wiq.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/V95953D57_zpsk0o88wiq.jpg.html)
http://i1096.photobucket.com/albums/g338/way2fast4you2/V9595852E_zpsdkg76xhb.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/V9595852E_zpsdkg76xhb.jpg.html)

[Maximus]

http://vid1096.photobucket.com/albums/g338/way2fast4you2/Darlene%20photos%202016%202782_zpsosnf9srv.mp4

9.87 @ 137.46 mph

Do you have mufflers on there?

[2Fast4You]

Do you have mufflers on there?

Most definitely!

[Maximus]

Most definitely!

*tapping fingers on desk.....

What size and Brand?:lol:

[2Fast4You]

Lol, 3.5" Spintech X-Pipe and mufflers.

http://i1096.photobucket.com/albums/g338/way2fast4you2/Exhaust%20install_zpss0hw6obi.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/Exhaust%20install_zpss0hw6obi.jpg.html)

[Maximus]

Most definitely!

Nice! I was looking at Spintech for my projects.

[2Fast4You]

I love the sound of this exhaust and the performance I have had with it.
What do you think of this rims? Lol

[Maximus]

Lol, 3.5" Spintech X-Pipe and mufflers.

http://i1096.photobucket.com/albums/g338/way2fast4you2/Exhaust%20install_zpss0hw6obi.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/Exhaust%20install_zpss0hw6obi.jpg.html)

Rob weld that up? Looks killer and sounds Bad Ass!:bigthumb

[Maximus]

I love the sound of this exhaust and the performance I have had with it.
What do you think of this rims? Lol

Waiting to see them under the car. You bringing this down to Dyno Day on the 21st?

[2Fast4You]

Rob weld that up? Looks killer and sounds Bad Ass!:bigthumb

Of the many things Rob did Weld, this is not one of them. It was already welded up when I got it, supposedly Rob Kropfeld welded them.


Waiting to see them under the car. You bringing this down to Dyno Day on the 21st?

They should be back on the car in the next day or two, not sure as of yet on the Dyno Day.

[cyah92]

They look good bro. Hopefully the added weight doesn't slow you down. Lol

[draggin50]

Here you go Brian, this should add to the sleeper look versus the fully polished look these had previously. Told you I would have to do something about it.

http://i1096.photobucket.com/albums/g338/way2fast4you2/V95953D57_zpsk0o88wiq.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/V95953D57_zpsk0o88wiq.jpg.html)
http://i1096.photobucket.com/albums/g338/way2fast4you2/V9595852E_zpsdkg76xhb.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/V9595852E_zpsdkg76xhb.jpg.html)

Damn that looks good!

[2Fast4You]

Should match up better with the grey tint of the car already Brian. Lol

[draggin50]

Need more paint!!!!


They would look good on an orange coupe!

[2Fast4You]

I have plenty of paint, unfortunately just lack to funds side of things right now, all in good time.

[redfirepearlgt]

Thought you were going to make them look ragged out some how so they would work with the cars paintjob. Those look nice!

[draggin50]

I have plenty of paint, unfortunately just lack to funds side of things right now, all in good time.

You've done good with everything else, why not give your painting a shot!

[2Fast4You]

You never know, I may give it a try and see what happens.

[2Fast4You]

Thought you were going to make them look ragged out some how so they would work with the cars paintjob. Those look nice!

I must have failed to mention that part to Kenny when I told him what color I wanted, at least it will look good with the color the car is anticipated to be someday.

[2Fast4You]

A few photos of the rims finished and back together.

http://i1096.photobucket.com/albums/g338/way2fast4you2/WP952016050595139547955295Pro_zps0wln1i8t.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/WP952016050595139547955295Pro_zps0wln1i8t.jpg.html )
http://i1096.photobucket.com/albums/g338/way2fast4you2/WP952016050595139548954995Pro_zpskgzrkqyg.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/WP952016050595139548954995Pro_zpskgzrkqyg.jpg.html )
http://i1096.photobucket.com/albums/g338/way2fast4you2/WP952016050595169549952395Pro_zpsd4novfq0.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/WP952016050595169549952395Pro_zpsd4novfq0.jpg.html )

[SN95N/A]

Sick !!

Sent from my VS990 using Tapatalk

[draggin50]

Needs more paint!

- - - Updated - - -

But those wheels look bad ass!

[2Fast4You]

Thanks, I hear yah. I will have to add more primer Brian, got it. Lol

[Maximus]

http://i1096.photobucket.com/albums/g338/way2fast4you2/WP952016050595169549952395Pro_zpsd4novfq0.jpg (http://s1096.photobucket.com/user/way2fast4you2/media/WP952016050595169549952395Pro_zpsd4novfq0.jpg.html )

Who in the Hell would put chevy door handles on a Mustang?? Thats as bad as putting one of those LS thingys into a Stang!! :tongue2:

[2Fast4You]

Who in the Hell would put chevy door handles on a Mustang?? Thats as bad as putting one of those LS thingys into a Stang!! :tongue2:

I know, right...

[Maximus]

I know, right...

probably was gonna paint it orange as well! :lol:

[2Fast4You]

probably was gonna paint it orange as well! :lol:

It's interesting that you say that, I'm thinking the same thing... :bigthumb

[S281SC]

If it is the same orange that brian's cobra is painted... Go for it!! That car looks so sweet!


Sent from my iPhone using Tapatalk

[draggin50]

His orange is going to look good!

[Maximus]

If it is the same orange that brian's cobra is painted... Go for it!! That car looks so sweet!


Sent from my iPhone using Tapatalk


His orange is going to look good!

Actually, its going to be this orange.....

http://i775.photobucket.com/albums/yy39/CincySpeed/2000%20Stang/2lj6.jpg (http://s775.photobucket.com/user/CincySpeed/media/2000%20Stang/2lj6.jpg.html)

and its going to look freakin awesome! :)

Is it painted yet????

[cyah92]

Well it took him along time to finally get one running so it's probably going to take along time to get painted. We can always dream though.

[redfirepearlgt]

Pink with green stripes.

[USMCPONY]

In for updates.......... lol